Rotating electrical machines - Part 16-1: Excitation systems for synchronous machines - Definitions (IEC 60034-16-1:2011)

This part of IEC 60034 defines terms applicable to the excitation systems of synchronous rotating electrical machines.

Drehende elektrische Maschinen - Teil 16-1: Erregersysteme für Synchronmaschinen - Begriffe (IEC 60034-16-1:2011)

Machines électriques tournantes - Partie 16-1: Systèmes d'excitation pour machines synchrones - Définitions (CEI 60034-16-1:2011)

La CEI 60034-16-1:2011 donne la définition des termes applicables aux systèmes d'excitation des machines électriques tournantes synchrones. Les principales modifications techniques par rapport à l'édition précédente sont quelques définitions qui ont été ajoutées et d'autres qui ont été mises à jour.

Električni rotacijski stroji - 16-1. del: Vzbujalni sistemi za sinhrone stroje - Definicije (IEC 60034-16-1:2011)

Ta del IEC 60034 opredeljuje izraze, ki se uporabljajo za vzbujalne sisteme za sinhrone električne rotacijske stroje.

General Information

Status
Published
Publication Date
24-Jul-2011
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
12-Jul-2011
Due Date
16-Sep-2011
Completion Date
25-Jul-2011

RELATIONS

Buy Standard

Standard
SIST EN 60034-16-1:2011
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 60034-16-1:2011
01-september-2011
1DGRPHãþD
SIST EN 60034-16-1:1999
(OHNWULþQLURWDFLMVNLVWURMLGHO9]EXMDOQLVLVWHPL]DVLQKURQHVWURMH
'HILQLFLMH ,(&

Rotating electrical machines - Part 16-1: Excitation systems for synchronous machines -

Definitions (IEC 60034-16-1:2011)

Drehende elektrische Maschinen - Teil 16-1: Erregersysteme für Synchronmaschinen -

Begriffe (IEC 60034-16-1:2011)

Machines électriques tournantes - Partie 16-1: Systèmes d'excitation pour machines

synchrones - Définitions (CEI 60034-16-1:2011)
Ta slovenski standard je istoveten z: EN 60034-16-1:2011
ICS:
29.160.01 Rotacijski stroji na splošno Rotating machinery in
general
SIST EN 60034-16-1:2011 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 60034-16-1:2011
---------------------- Page: 2 ----------------------
SIST EN 60034-16-1:2011
EUROPEAN STANDARD
EN 60034-16-1
NORME EUROPÉENNE
July 2011
EUROPÄISCHE NORM
ICS 29.160 Supersedes EN 60034-16-1:1995
English version
Rotating electrical machines -
Part 16-1: Excitation systems for synchronous machines -
Definitions
(IEC 60034-16-1:2011)
Machines électriques tournantes - Drehende elektrische Maschinen -
Partie 16-1: Systèmes d'excitation pour Teil 16-1: Erregersysteme für
machines synchrones - Synchronmaschinen -
Définitions Begriffe
(CEI 60034-16-1:2011) (IEC 60034-16-1:2011)

This European Standard was approved by CENELEC on 2011-06-29. CENELEC members are bound to comply

with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard

the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on

application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CENELEC member into its own language and notified

to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,

the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,

Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,

Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60034-16-1:2011 E
---------------------- Page: 3 ----------------------
SIST EN 60034-16-1:2011
EN 60034-16-1:2011 - 2 -
Foreword

The text of document 2/1598/CDV, future edition 2 of IEC 60034-16-1, prepared by IEC TC 2, Rotating

machinery, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as

EN 60034-16-1 on 2011-06-29.
This European Standard supersedes EN 60034-16-1:1995.
The major technical changes with regard to EN 60034-16-1:1995 are as follows:
Clause or subclause Change
2.1.1 Additional definition for digital excitation system
2.1.2 Additional definition for reversible excitation system
2.3 Edited definition of excitation control
2.4 Additional definition for excitation control system. Added block diagram of
excitation control system
2.17 Additional definition for excitation system negative ceiling voltage U
2.19 Edited definition of excitation system on-load ceiling voltage U

2.20 Additional definition for excitation system on-load negative ceiling voltage U

2.22 Additional definition for excitation system voltage response time
2.23 Additional definition for high initial response excitation system
3.1 Edited definition of rotating exciter
3.1.2 Edited definition of AC exciter
3.2.3 Additional definition for auxiliary winding source static exciter
3.3 Additional definition for pilot exciter
4.1 to 4.7 Edited definitions of control functions

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent

rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2012-03-29
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2014-06-29
with the EN have to be withdrawn
__________
---------------------- Page: 4 ----------------------
SIST EN 60034-16-1:2011
- 3 - EN 60034-16-1:2011
Endorsement notice

The text of the International Standard IEC 60034-16-1:2011 was approved by CENELEC as a European

Standard without any modification.
__________
---------------------- Page: 5 ----------------------
SIST EN 60034-16-1:2011
---------------------- Page: 6 ----------------------
SIST EN 60034-16-1:2011
IEC 60034-16-1
Edition 2.0 2011-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Rotating electrical machines –
Part 16-1: Excitation systems for synchronous machines – Definitions
Machines électriques tournantes –
Partie 16-1: Systèmes d'excitation pour machines synchrones – Définitions
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX L
ICS 29.160 ISBN 978-2-88912-487-9
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN 60034-16-1:2011
– 2 – 60034-16-1  IEC:2011
CONTENTS

FOREWORD ........................................................................................................................... 3

1 Scope ............................................................................................................................... 5

2 General ............................................................................................................................ 5

3 Exciter categories ........................................................................................................... 10

4 Control functions ............................................................................................................ 11

Figure 1 – Block diagram of excitation control system ............................................................. 6

Figure 2 – Determination of no-load field current I and air-gap field current I ..................... 7

f0 fg

Figure 3 – Determination of excitation system nominal response, V ...................................... 9

---------------------- Page: 8 ----------------------
SIST EN 60034-16-1:2011
60034-16-1  IEC:2011 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ROTATING ELECTRICAL MACHINES –
Part 16-1: Excitation systems for synchronous machines –
Definitions
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

in the subject dealt with may participate in this preparatory work. International, governmental and non-

governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

with the International Organization for Standardization (ISO) in accordance with conditions determined by

agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence

between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

the latter.

5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

services carried out by independent certification bodies.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of

patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 60034-16-1 has been prepared by IEC technical committee 2:

Rotating machinery.

This second edition cancels and replaces the first edition, issued in 1991, and constitutes a

technical revision.
The major technical changes with regard to the previous edition are as follows:
Clause or
Change
subclause
2.1.1 Additional definition for digital excitation system
2.1.2 Additional definition for reversible excitation system
2.3 Edited definition of excitation control
---------------------- Page: 9 ----------------------
SIST EN 60034-16-1:2011
– 4 – 60034-16-1  IEC:2011
2.4 Additional definition for excitation control system. Added block diagram of
excitation control system
2.17 Additional definition for excitation system negative ceiling voltage U
2.19 Edited definition of excitation system on-load ceiling voltage U

2.20 Additional definition for excitation system on-load negative ceiling voltage U

2.22 Additional definition for excitation system voltage response time
2.23 Additional definition for high initial response excitation system
3.1 Edited definition of rotating exciter
3.1.2 Edited definition of AC exciter
Additional definition for auxiliary winding source static exciter
3.2.3
Additional definition for pilot exciter
3.3
Edited definitions of control functions
4.1 to 4.7
The text of this standard is based on the following documents:
CDV Report on voting
2/1598/CDV 2/1617/RVC

Full information on the voting for the approval of this standard can be found in the report on

voting indicated in the above table.

This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

NOTE A table of cross-references of all IEC TC 2 publications can be found on the IEC TC 2 dashboard on the

IEC website.

The committee has decided that the contents of this publication will remain unchanged until

the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data

related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
---------------------- Page: 10 ----------------------
SIST EN 60034-16-1:2011
60034-16-1  IEC:2011 – 5 –
ROTATING ELECTRICAL MACHINES –
Part 16-1: Excitation systems for synchronous machines –
Definitions
1 Scope

This part of IEC 60034 defines terms applicable to the excitation systems of synchronous

rotating electrical machines.
2 General
2.1
excitation system

equipment providing the field current of a machine, including all regulating and control

elements, as well as field discharge or suppression equipment and protective devices

2.1.1
digital excitation system

excitation system of a machine where some, if not all, of regulating, control, limiting and

protective functionality is implemented using digital technology

NOTE As a minimum, the voltage regulation function must be implemented digitally in such a system.

2.1.2
reversible excitation system

excitation system providing compulsory change of sign of magnetic flux, created by a winding

or excitation windings of a synchronous machine
2.2
exciter
source of the electrical power, providi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.