iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 61300-2-51:2007/AC:2015

(Corrigendum)

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-51: Tests - Fibre optic connector test for transmission with applied tensile load - Singlemode and multimode

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-51: Tests - Fibre optic connector test for transmission with applied tensile load - Singlemode and multimode

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-51: Prüfungen - Prüfung für Lichtwellenleiter-Steckverbinder mit angelegter Zugkraft - Einmoden und Mehrmoden

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-51: Essais - Essai des connecteurs à fibres optiques en transmission lorsqu'une charge de traction est appliquée - Unimodal et multimodal

Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 2-51. del: Preskusi - Preskus optičnega konektorja za prenos ob uporabni natezni obremenitvi - Enorodni in večrodni

General Information

Status
Published
Publication Date
10-Sep-2015
ICS
33.180.20 - Fibre optic interconnecting devices
Technical Committee
MOC - Mobile Communications
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
28-Jan-2015
Due Date
04-Apr-2015
Completion Date
11-Sep-2015
Ref Project
EN 61300-2-51:2007/AC:2015 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-51: Tests - Fibre optic connector test for transmission with applied tensile load - Singlemode and multimode

Relations

Corrects
SIST EN 61300-2-51:2007 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-51: Tests - Fibre optic connector test for transmission with applied tensile load - Singlemode and multimode
Effective Date
20-Jan-2015

Buy Standard

EN 61300-2-51:2007/AC:2015EN 61300-2-51:2007/AC:2015
PreviousNext
Corrigendum
EN 61300-2-51:2007/AC:2015
English and French language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-51: Prüfungen - Prüfung für Lichtwellenleiter-Steckverbinder mit angelegter Zugkraft - Einmoden und MehrmodenDispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-51: Essais - Essai des connecteurs à fibres optiques en transmission lorsqu'une charge de traction est appliquée - Unimodal et multimodalFibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-51: Tests - Fibre optic connector test for transmission with applied tensile load - Singlemode and multimode33.180.20Fibre optic interconnecting devicesICS:Ta slovenski standard je istoveten z:EN 61300-2-51:2007/AC:2015SIST EN 61300-2-51:2007/AC:2015en,fr01-oktober-2015SIST EN 61300-2-51:2007/AC:2015SLOVENSKI
STANDARD



SIST EN 61300-2-51:2007/AC:2015



IEC 61300-2-51:2007/COR1:2015 – 1 –
 IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE ____________
IEC 61300-2-51 Edition 1.0
2007-06
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures –
Part 2-51: Tests – Fibre optic connector test for transmission with applied tensile load – Singlemode and multimode IEC 61300-2-51 Édition 1.0
2007-06
Dispositifs d’interconnexion et composants passifs à fibres optiques – Méthodes fondamentales d’essais et de mesures –
Partie 2-51: Essais – Essai des connecteurs à
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 61300-3-53:2021/AC:2023(Corrigendum)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from multimode waveguide (including fibre) (IEC 61300-3-53:2020/COR1:2023)
EN IEC 61300-3-53:2021/AC:2023-07
  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61300-3-4:2023/AC:2023(Corrigendum)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation (IEC 61300-3-4:2023/COR1:2023)
EN IEC 61300-3-4:2023/AC:2023-07
  • Corrigendum
    3 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50411-3-2:2023(Main)
Fibre management systems and protective housings to be used in optical fibre communication systems - Product specifications - Part 3-2: Single-mode mechanical fibre splice
EN 50411-3-2:2023

1.1   Product definition
This document contains the initial, start of life dimensional, optical, mechanical and environmental performance requirements, which single mode mechanical splice needs to meet in order for it to be categorized as a European standard product.
Although, in this document, the product is qualified for EN IEC 60793 2 50 type B-652.D single mode fibres, it is also suitable for mechanical splicing of other single mode fibres with 125 µm diameter glass cladding.
1.2   Interoperability
The installed mechanical splice fits into optical fibre management system with optical splice cassettes or splice trays as defined in EN IEC 61756 1. This document specifies the following two physical interface dimensions:
—   cross sectional profile with width, height or diameter (in millimetres);
—   length (in millimetres).
1.3   Expected performance
In this document, the performance of the mechanical splice is given with identical fibres only as specified in Annex A. Losses associated with tolerances in fibre cladding diameter and mode field mismatch are not taken into account. The measured attenuation is a function of the core concentricity, cladding non-circularity and alignment capability. The optical return loss performance is a function of the index matching gel and the fibre end face preparation
1.4   Operating environment
The tests selected combined with the severities and durations are representative of an outdoor enclosed environment defined as category OP in EN IEC 61753 1. To ensure that the product can be used in outdoor closures, boxes or street cabinets for categories A, G or S (as defined in EN IEC 61753 1) the specified lower temperature is extended to −40 °C and a water immersion requirement for temporary flooding conditions has been added.
1.5   Reliability
Whilst the anticipated service life expectancy of the product in this environment is at least 20 years, compliance with this specification does not guarantee the reliability of the product. This is expected to be predicted using a recognized reliability assessment programme.
1.6   Quality assurance
Compliance with this specification does not guarantee the manufacturing consistency of the product. This is expected to be maintained using a recognized quality assurance programme.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61300-3-4:2023(Main)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation (IEC 61300-3-4:2023)
EN IEC 61300-3-4:2023

IEC 61300-3-4:2023 is available as IEC 61300-3-4:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 61300-3-4: 2022 describes the various methods available to measure the attenuation of optical components. It is not, however, applicable to random mate attenuation measurements as described in IEC 61300-3-34 and IEC 61300-3-45 nor for attenuation measurements of dense wavelength division multiplexing (DWDM) devices as described in IEC 61300-3-29. This fourth edition cancels and replaces the third edition published in 2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) addition of Clause 3 containing terms, definitions and abbreviated terms;
b) addition of a new LSPM measurement method, insertion method (D);
c) addition of Annex A describing attenuation measurement of multicore fibre;
d) changed reference test method to insertion C and alternative test method to substitution or insertion D for power meter and type 4 DUT.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63267-1:2023(Main)
Fibre optic interconnecting devices and passive components - Connector optical interfaces for enhanced macro bend loss multimode fibres - Part 1: Optical interfaces for 50 um core diameter fibres - General and guidance (IEC 63267-1:2023)
EN IEC 63267-1:2023

This part of IEC 63267 covers multimode fibre optic connection interfaces. It includes references, document structure details, definitions, and standardised optical connection grades.
The grades are based on random mated connections between two optical connector populations according to prescribed characteristics including the core diameter and numerical aperture mismatches.
The document describes the rules under which an optical interface is created.
It also defines standardised test methods where appropriate.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61300-3-33:2022/AC:2023(Corrigendum)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33: Examinations and measurements - Withdrawal force from a resilient alignment sleeve using pin gauges (IEC 61300-3-33:2022/COR1:2023)
EN IEC 61300-3-33:2022/AC:2023-05
  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61300-2-1:2023(Main)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) (IEC 61300-2-1:2023)
EN IEC 61300-2-1:2023

This part of IEC 61300 evaluates the effects of vibration on fibre optic devices at the predominant frequency ranges and magnitudes that are encountered during field service on attenuation.
NOTE Most vibrations encountered in service are not of a simple harmonic nature. However, it has been shown that tests based on vibrations of this type are satisfactory to simulating actual service.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62148-22:2023(Main)
Fibre optic active components and devices - Package and interface standards - Part 22: 25 Gbit/s directly modulated laser packages with temperature control unit (IEC 62148-22:2023)
EN IEC 62148-22:2023

IEC 62148-22: 2023 defines the physical dimensions and interface specifications for directly modulated laser (DML) devices used in optical telecommunication and optical data transmission applications. The intent of this document is to adequately specify the physical requirements for DML devices so as to enable mechanical interchangeability of laser devices or transmitters complying with this document both at the printed circuit board and for any panel-mounting requirements.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61300-2-18:2023(Main)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat (IEC 61300-2-18:2023)
EN IEC 61300-2-18:2023

This part of IEC 61300 details a procedure to determine the suitability of a fibre optic interconnecting device, passive component, splices or closure to withstand the environmental condition of extended high temperature that occur during operation, storage and/or transport. The test is intended to indicate the performance of such devices when exposed to heat of constant temperature over a given period.
In general terms, this test provides a high temperature to induce potential failures due to softening and expansions.
This procedure does not assess the ability of a device to operate during temperature variations; in this case, IEC 61300-2-22 is used.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62149-12:2023(Main)
Fibre optic active components and devices - Performance standards - Part 12: Distributed feedback laser diode device for analogue radio over fibre systems (IEC 62149-12:2023)
EN IEC 62149-12:2023

IEC 62149-12:2023 This part of IEC 62149 defines performance specifications for distributed feedback laser diode (DFB-LD) devices used in analogue radio over fibre (RoF) systems. It defines product performance requirements together with a series of tests and measurements with clearly defined conditions, severities, and pass/fail criteria. The tests are intended to be run on a “once-off” basis to prove a product’s ability to satisfy the performance requirements.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day