D13.55 - Body Measurement for Apparel Sizing

SCOPE
1.1 This standard is a compilation of terminology related to the body dimensions for apparel sizing.  
1.2 For definitions of other textile terms, refer to Terminology D123.  
1.3 The terms are listed in alphabetical order regardless of whether they are horizontal or vertical measurements. The three dimensional Avatars were created by Alvanon Inc. See Figs. 1-19.  
1.4 The term “height” has been designated for vertical measurements.  
1.5 The term “length” has been designated for contour measurements.

SIGNIFICANCE AND USE
4.1 The use of the body measurement information in Tables 1 and 2 will assist manufacturers in developing patterns and garments that are consistent with the current anthropometric characteristics of the population of interest. This practice should in turn reduce or minimize consumer confusion and dissatisfaction related to apparel sizing. (Also refer to ISO 3635 Size Designation Procedures.)
SCOPE
1.1 These tables list body measurements of infants’ sizes. Although these are body measurements, they can be used as a baseline in designing apparel for infants in this size range when considering such factors as fabric type, ease for body movement, styling, and fit.  
1.2 These tables list body measurements for the complete range of infant sizing.  
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SIGNIFICANCE AND USE
The use of the body measurement information in Tables 1 and 2 will assist manufacturers in developing patterns and garments that are consistent with the current anthropometric characteristics of the population of interest. This practice should in turn reduce or minimize consumer confusion and dissatisfaction related to apparel sizing. (Also refer to ISO 3635 Size Designation Procedures.)
Three-dimensional avatars depicting each of the mature mens sizes in short, regular and tall, were created by Alvanon, Inc. and included in this standard to assist manufacturers in visualizing the posture, shape, and proportions generated by the measurements charts in the accompanying Tables. (Avatar 1-6) See Figs. 1-3.
SCOPE
1.1 These tables list body measurements of mature male figure type, age 35 and older, sizes 34 through 52 in Short, Regular, and Tall. Although these are body measurements, they can be used as a baseline in designing apparel for Mature Men in this size range when considering such factors as fabric type, ease for body movement, styling, and fit.
1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 These tables list body measurements of adult female misses figure Type sizes 00 through 20. Although these are body measurements, they can be used as a baseline in designing apparel for Missy in this size range when considering such factors as fabric type, ease for body movement, styling, and fit.
1.2 These tables list body measurements for the complete range of Missy sizing.
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. ^REFERENCE:
ASTM Standards:
D 123 Terminology Relating to Textile Materials
D 5219 Terminology Relating to a Body Dimension for Apparel Sizing
ISO Standards:  
ISO 3635 Size Designation of Clothes, Definitions, and Body Measurement Procedures

SIGNIFICANCE AND USE
The use of the body measurement information in Tables 1-6 will assist manufacturers in developing patterns and garments that are consistent with the current anthropometric characteristics of the population of interest. This practice should in turn reduce or minimize consumer confusion and dissatisfaction related to apparel sizing. (Also refer to ISO 3635 Size Designation Procedures.)
SCOPE
1.1 These tables list body measurements of girls sizes. Although these are body measurements, they can be used as a baseline in designing apparel for girls in this size range when considering such factors as fabric type, ease for body movement, styling, and fit.
1.2 The maximum age for the Girl’s chart is 12 ½ years old to the size 20.
1.3 The size table includes the range of toddler sizes, these values are for both girl’s & boy’s and will be included in the boy’s standard as well.
1.4 These tables list body measurements for the complete range of Girls sizing. Slim subjects are of same stature (height), with a slimmer body, and lower body weight than regular subjects as illustrated by the measurement charts.
1.5 The values stated in either acceptable SI units or inch-pound units shall be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 This table lists body measurements of the adult female misses figure type, sizes 2 through 20. Although these are body measurements, they can be used as a baseline in designing apparel for misses figures in this size range when considering such factors as fabric type, desired ease for body movement, styling, and fit.
1.2 The values stated in either acceptable SI units or inch-pound units shall be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way.
WITHDRAWN RATIONALE
This table lists body measurements of the adult female misses figure type, sizes 2 through 20.  
Formerly under the jurisdiction of Committee D13 on Textiles and the direct responsibility of Subcommittee D13.55 on Body Measurement for Apparel Sizing, this standard was withdrawn in January 2010 in accordance with section 10.5.3.1 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.

SCOPE
1.1 These tables list body measurements of boys, sizes 6 to 24 Husky. Although these are body measurements, they can be used as a baseline in designing apparel for boys and students in this size range when considering such factors as fabric type, ease for body movement, styling, and fit.
1.2 The husky body has a heavier build and higher body weight than other boys size ranges.
1.3 The values stated in either acceptable SI units or inch-pound units shall be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 This standard is a compilation of terminology related to the body dimensions for necessary apparel sizing.
1.2 For definitions of other textile terms, refer to Terminology D 123.
1.3 The terms are listed in alphabetical order regardless of whether they are horizontal or vertical measurements. The three dimensional Avatars were created by Alvanon Inc. See Figs. 1-18.
FIG. 1 Body Measurements
FIG. 2 Upper Back Measurements
FIG. 3 Body Measurements
FIG. 4 Upper Body Meaurements
FIG. 5 Upper Body Meaurements
FIG. 6 Upper Body Meaurements
FIG. 7 Center Front Waist Length
FIG. 8 Center Back Waist Length
FIG. 9 Upper Body Measurements
FIG. 10 Back Measurements
FIG. 11 Upper Body Measurements
FIG. 12 Cervicale to Wrist Length
FIG. 13 Upper Body Measurements
FIG. 14 Arm Length (Bent Arm)
FIG. 15 Crotch Length (Total)
FIG. 16 Hand Width/ Hand Length
FIG. 17 Hand Girth
FIG. 18 Foot Length/Width

SCOPE
1.1 This standard is a compilation of terminology related to the body dimensions for necessary apparel sizing.  
1.2 For definitions of other textile terms, refer to Terminology D123.  
1.3 The terms are listed in alphabetical order regardless of whether they are horizontal or vertical measurements. The three dimensional Avatars were created by Alvanon Inc. See Figs. 1-18.

SIGNIFICANCE AND USE
The use of the body measurement information in Tables 1 and 2 will assist manufacturers in developing patterns and garments that are consistent with the current anthropometric characteristics of the population of interest. This practice should in turn reduce or minimize consumer confusion and dissatisfaction related to apparel sizing. (Also refer to ISO 3635 Size Designation Procedures.)
SCOPE
1.1 These tables list body measurements of infants’ sizes. Although these are body measurements, they can be used as a baseline in designing apparel for infants in this size range when considering such factors as fabric type, ease for body movement, styling, and fit.
1.2 These tables list body measurements for the complete range of infant sizing.
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SIGNIFICANCE AND USE
The use of the body measurement information in Tables 1 and 2 will assist manufacturers in developing patterns and garments that are consistent with the current anthropometric characteristics of the population of interest. This practice should in turn reduce or minimize consumer confusion and dissatisfaction related to apparel sizing. (Also refer to ISO 3635 Size Designation Procedures.)
SCOPE
1.1 These tables list body measurements of young adult female junior figure type, sizes 0 to 19. Although these are body measurements, they can be used as a baseline in designing apparel for young women in this size range when considering such factors as fabric type, ease for body movement, styling, and fit.
1.2 The junior body is younger, not fully developed, with a higher waistline than other women's size ranges.
1.3 The values stated in either acceptable SI units or inch-pound units shall be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 This standard is a compilation of terminology related to the body dimensions for necessary apparel sizing.
1.2 For definitions of other textile terms, refer to Terminology D 123.
1.3 The terms are listed in alphabetical order regardless of whether they are horizontal or vertical measurements.

SIGNIFICANCE AND USE
The use of the body measurement information in Tables 1-6 will assist manufacturers in developing patterns and garments that are consistent with the current anthropometric characteristics of the population of interest. This practice should in turn reduce or minimize consumer confusion and dissatisfaction related to apparel sizing. (Also refer to ISO 3635 Size Designation Procedures.)
SCOPE
1.1 These tables list body measurements of girls sizes. Although these are body measurements, they can be used as a baseline in designing apparel for girls in this size range when considering such factors as fabric type, ease for body movement, styling, and fit.
1.2 The maximum age for the Girl’s chart is 12 ½ years old to the size 20.
1.3 The size table includes the range of toddler sizes, these values are for both girl’s & boy’s and will be included in the boy’s standard as well.
1.4 These tables list body measurements for the complete range of Girls sizing. Slim subjects are of same stature (height), with a slimmer body, and lower body weight than regular subjects as illustrated by the measurement charts.
1.5 The values stated in either acceptable SI units or inch-pound units shall be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 This standard is a compilation of terminology related to the body dimensions for necessary apparel sizing.
1.2 For definitions of other textile terms, refer to Terminology D 123.
1.3 The terms are listed in alphabetical order regardless of whether they are horizontal or vertical measurements.

SIGNIFICANCE AND USE
The use of the body measurement information in Tables 1 and 2 will assist manufacturers in developing patterns and garments that are consistent with the current anthropometric characteristics of the population of interest. This practice should in turn reduce or minimize consumer confusion and dissatisfaction related to apparel sizing. (Also refer to ISO 3635 Size Designation Procedures.)
SCOPE
1.1 These tables list body measurements of infants’ sizes. Although these are body measurements, they can be used as a baseline in designing apparel for infants in this size range when considering such factors as fabric type, ease for body movement, styling, and fit.
1.2 These tables list body measurements for the complete range of infant sizing.
1.3 The values stated in either acceptable SI units or inch-pound units shall be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 This standard table lists the body measurements of pregnant women from misses size two to twenty-two. Although these are body measurements, they can be used in designing apparel for women in this size range when such factors as fabric type, ease of body movement, styling, and fit are taken into account.
1.2 The values stated in either SI units or in inch-pound units shall be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way.

SCOPE
1.1 These standard tables cover the body measurements of men from size thirty-four to sixty. Although these are body measurements, they can be used in designing apparel for men in this size range when such factors as fabric type, ease of body movement, styling, and fit are taken into account.
1.2 The values stated in either acceptable metric units or in other units shall be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 These tables list body measurements of boys, sizes 8 to 14 Slim and 8 to 20 Regular. Although these are body measurements, they can be used as a baseline in designing apparel for boys and students in this size range when considering such factors as fabric type, ease for body movement, styling, and fit.
1.2 These tables list body measurements for Slim and Regular. Slim subjects are of same stature (height), with a slimmer body, and lower body weight than regular subjects as illustrated by the measurement charts.
1.3 The values state in either acceptable SI units or inch-pound units shall be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 These tables list body measurements of girls, sizes 7 to 16. Although these are body measurements, they can be used as a baseline in designing apparel for girls in this size range when considering such factors as fabric type, ease for body movement, styling, and fit.
1.2 These tables list body measurements for Slim and Regular. Slim subjects are of same stature (height), with a slimmer body, and lower body weight than regular subjects as illustrated by the measurement charts.
1.3 The values stated in either acceptable SI units or inch-pound units shall be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 These tables list body measurements of boys, sizes 6 to 24 Husky. Although these are body measurements, they can be used as a baseline in designing apparel for boys and students in this size range when considering such factors as fabric type, ease for body movement, styling, and fit.
1.2 The husky body has a heavier build and higher body weight than other boys size ranges.
1.3 The values stated in either acceptable SI units or inch-pound units shall be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 These tables list body measurements of infants’ sizes. Although these are body measurements, they can be used as a baseline in designing apparel for infants in this size range when considering such factors as fabric type, ease for body movement, styling, and fit.
1.2 These tables list body measurements for the complete range of infant sizing.
1.3 The values stated in either acceptable SI units or inch-pound units shall be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 This standard is a compilation of terminology related to the body dimensions for necessary apparel sizing.
1.2 For definitions of other textile terms, refer to Terminology D 123.
1.3 The terms are listed in alphabetical order regardless of whether they are horizontal or vertical measurements.

SCOPE
1.1 These tables list body measurements of young adult female junior figure type, sizes 0 to 19. Although these are body measurements, they can be used as a baseline in designing apparel for young women in this size range when considering such factors as fabric type, ease for body movement, styling, and fit.
1.2 The junior body is younger, not fully developed, with a higher waistline than other women's size ranges.
1.3 The values stated in either acceptable SI units or inch-pound units shall be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 This document represents research methodology and the tables represent charted data from subjects. Some terminology is specific to the research. The data represent the first body measurements ever taken of women aged 55 and older and is not a standard of average current apparel industry practices as represented in all other sizing standards.
1.2 These tables list body measurements of adult women age 55 and over. The body measurements tables can be used as a baseline in designing apparel for adult women in this age group, taking into account such factors as fabric type, desired ease of body movement, styling, and fit.
1.3 Measurement tables correspond to the figure types and numerical size designations in the PS 42-70 database. Until body measurements of all adult women are updated, companies will have to analyze the older customer's differences by body measurements and proportions instead of hang tag numbers, and adapt them to currently marketed sizes and figure types. Companies especially affected are those who are today using smaller numbered hang tag designations, who offer mainly S, M, and L sizes, or who have adjusted their charts from the PS 42-70 database to reflect the specific body measurements of their 1990's customer.
1.4 The values stated in either acceptable SI units or inch-pound units shall be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values.

SCOPE
1.1 This table lists body measurements of the adult female misses figure type, sizes 2 through 20. Although these are body measurements, they can be used as a baseline in designing apparel for misses figures in this size range when considering such factors as fabric type, desired ease for body movement, styling, and fit.
1.2 The values stated in either acceptable SI units or inch-pound units shall be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way.

SCOPE
1.1 These tables list body measurements of children, sizes 2 to 6x/7. Although these measurements are body measurements, they can be used as a baseline in designing apparel for children in this age range when taking into account such factors as fabric type, ease for body movement, styling, and fit.  
1.2 The values stated in either acceptable metric units or other units shall be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 These tables list body measurements of boys, sizes 8 to 14 Slim and 8 to 20 Regular. Although these are body measurements, they can be used as a baseline in designing apparel for boys and students in this size range when considering such factors as fabric type, ease for body movement, styling, and fit.
1.2 These tables list body measurements for Slim and Regular. Slim subjects are of same stature (height), with a slimmer body, and lower body weight than regular subjects as illustrated by the measurement charts.
1.3 The values state in either acceptable SI units or inch-pound units shall be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 These tables list body measurements of infants’ sizes. Although these are body measurements, they can be used as a baseline in designing apparel for infants in this size range when considering such factors as fabric type, ease for body movement, styling, and fit.
1.2 These tables list body measurements for the complete range of infant sizing.
1.3 The values stated in either acceptable SI units or inch-pound units shall be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 These tables list body measurements of girls, sizes 7 to 16. Although these are body measurements, they can be used as a baseline in designing apparel for girls in this size range when considering such factors as fabric type, ease for body measurement, styling, and fit.

SCOPE
1.1 These standard tables cover the body measurements of men from size thirty-four to sixty. Although these are body measurements, they can be used in designing apparel for men in this size range when such factors as fabric type, ease of body movement, styling, and fit are taken into account.

SCOPE
1.1 This standard is a compilation of terminology related to the body dimensions for apparel sizing.

SCOPE
1.1 This document represents research methodology and the tables represent charted data from subjects. Some terminology is specific to the research. The data represent the first body measurements ever taken of women aged 55 and older and is not a standard of average current apparel industry practices as represented in all other sizing standards.
1.2 These tables list body measurements of adult women age 55 and over. The body measurements tables can be used as a baseline in designing apparel for adult women in this age group, taking into account such factors as fabric type, desired ease of body movement, styling, and fit.
1.3 Measurement tables correspond to the figure types and numerical size designations in the PS 42-70 database. Until body measurements of all adult women are updated, companies will have to analyze the older customer's differences by body measurements and proportions instead of hang tag numbers, and adapt them to currently marketed sizes and figure types. Companies especially affected are those who are today using smaller numbered hang tag designations, who offer mainly S, M, and L sizes, or who have adjusted their charts from the PS 42-70 database to reflect the specific body measurements of their 1990's customer.
1.4 The values stated in either acceptable SI units or inch-pound units shall be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values.
WITHDRAWN RATIONALE
This document represents research methodology and the tables represent charted data from subjects. Some terminology is specific to the research. The data represent the first body measurements ever taken of women aged 55 and older and is not a standard of average current apparel industry practices as represented in all other sizing standards.
Formerly under the jurisdiction of Committee D13 on Textiles, this practice was withdrawn in January 2019 in accordance with section 10.6.3 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.

SCOPE
1.1 This table lists body measurements of the adult female "plus" figure type, sizes 14W through 32W. Although these are body measurements, they can be used as a baseline in designing apparel for female figures in this size range when considering such factors as fabric type, desired ease for body movement, styling, and fit.
1.2 The values stated in either acceptable SI units or inch-pound units shall be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way.
WITHDRAWN RATIONALE
This table lists body measurements of the adult female “plus” figure type, sizes 14W through 32W.
Formerly under the jurisdiction of Committee D13 on Textiles, this table was withdrawn in January 2013 in accordance with section 10.5.3.1 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.

SCOPE
1.1 This document represents research methodology and the tables represent charted data from subjects. Some terminology is specific to the research. The data represent the first body measurements ever taken of women aged 55 and older and is not a standard of average current apparel industry practices as represented in all other sizing standards.
1.2 These tables list body measurements of adult women age 55 and over. The body measurements tables can be used as a baseline in designing apparel for adult women in this age group, taking into account such factors as fabric type, desired ease of body movement, styling, and fit.
1.3 Measurement tables correspond to the figure types and numerical size designations in the PS 42-70 database. Until body measurements of all adult women are updated, companies will have to analyze the older customer's differences by body measurements and proportions instead of hang tag numbers, and adapt them to currently marketed sizes and figure types. Companies especially affected are those who are today using smaller numbered hang tag designations, who offer mainly S, M, and L sizes, or who have adjusted their charts from the PS 42-70 database to reflect the specific body measurements of their 1990's customer.
1.4 The values stated in either acceptable SI units or inch-pound units shall be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values.
WITHDRAWN RATIONALE
This document represents research methodology and the tables represent charted data from subjects. Some terminology is specific to the research. The data represent the first body measurements ever taken of women aged 55 and older and is not a standard of average current apparel industry practices as represented in all other sizing standards.
Formerly under the jurisdiction of Committee D13 on Textiles and the direct responsibility of Subcommittee D13.55 on Body Measurement for Apparel Sizing, these tables were withdrawn in January 2010 in accordance with section 10.5.3.1 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.

SCOPE
1.1 These tables list body measurements of children, sizes 2 to 6x/7. Although these measurements are body measurements, they can be used as a baseline in designing apparel for children in this age range when taking into account such factors as fabric type, ease for body movement, styling, and fit.  
1.2 The values stated in either acceptable metric units or other units shall be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
WITHDRAWN RATIONALE
These tables list body measurements of children, sizes 2 to 6x/7. Formerly under the jurisdiction of Committee D13 on Textiles , these tables were withdrawn in January 2009 in accordance with section 10.5.3.1 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.