CEN/TC 190/WG 13 - Welding of cast iron

This document specifies the requirements for fusion welding of unalloyed and low-alloy cast iron castings produced in accordance with:
-   EN 1561, Founding - Grey cast irons;
-   EN 1562, Founding - Malleable cast irons;
-   EN 1563, Founding - Spheroidal graphite cast irons.
This document does not apply to the joint welding of cast iron castings to other materials.

This document specifies main requirements, limits, inspection conditions and acceptance requirements as well as related inspection documents of welders for welded cast iron test pieces and workpieces.
It provides a set of technical rules for a systematic qualification test of a welder‘s skills, and enables such qualifications to be uniformly accepted independently of the type of product, location and examiner or examining body.
This document specifies the testing of a welder’s skill unless a higher level skill test is required.
The acceptance of a welder’s skill according to this document implies a practical experience and knowledge regarding the welding process, materials and safety requirements (see Annex C).
This document is to be used when requirements on part of a customer, testing or monitoring body or other organization are postulated.
This document defines the qualification test of welders for the fusion welding of cast irons. The welding processes referred to in this standard include those fusion welding processes which are designated as manual or partly mechanized welding. It does not cover fully mechanized and automated welding processes (see EN ISO 14732). Cast iron materials which are covered by this document are mentioned in 5.4.
The inspection document and certification are made out under the responsibility of the testing body.

This European Standard specifies the requirements for fusion welding of unalloyed and low-alloy cast iron castings produced in accordance with:
-   EN 1561, Founding - Grey cast irons;
-   EN 1562, Founding - Malleable cast irons;
-   EN 1563, Founding - Spheroidal graphite cast irons.
This European Standard does not apply to the joint welding of cast iron castings to other materials.

This European Standard specifies main requirements, limits, inspection conditions and acceptance require-ments as well as related inspection documents of welders for welded cast iron test pieces and workpieces.
It provides a set of technical rules for a systematic qualification test of a welder‘s skills, and enables such qualifications to be uniformly accepted independently of the type of product, location and examiner/examining body.
This European Standard specifies the testing of a welder’s skill unless a higher level skill test is applicable.
The acceptance of a welder’s skill according to this standard implies a practical experience and knowledge regarding the welding process, materials and safety requirements (see Annex C).
This European Standard has to be used when requirements on part of a customer, testing or monitoring body or other organisation are postulated.
This European Standard defines the qualification test of welders for the fusion welding of cast iron. The weld-ing processes referred to in this standard include those fusion welding processes which are designated as manual or partly mechanized welding. It does not cover fully mechanized and automated welding processes (see EN 1418). Cast iron materials which are covered by this European Standard are mentioned in 5.4.
The inspection document and certification is made out in the name of the testing body’s liability.