SIST EN IEC 63067:2020
(Main)Electrical installations for lighting and beaconing of aerodromes - Connecting devices - General requirements and tests (IEC 63067:2020)
Electrical installations for lighting and beaconing of aerodromes - Connecting devices - General requirements and tests (IEC 63067:2020)
This document applies to plugs and receptacles for single or multiple pole connecting devices
used for aeronautical ground lighting applications.
Additional requirements and usage of connecting devices are given in different parts of
IEC 61820 series.
Connecting devices complying with this document are suitable for use in environmental class
E11 according to IEC 61820-1.
Elektrische Anlagen für Beleuchtung und Befeuerung von Flugplätzen - Steckverbinder - Allgemeine Anforderungen und Prüfungen (IEC 63067:2020)
Installations électriques pour l'éclairage et le balisage des aérodromes - Dispositifs de connexion - Exigences générales et essais (IEC 63067:2020)
L'IEC 63067:2020 s'applique aux fiches et embases pour dispositifs de connexion unipolaires ou multipolaires utilisés dans le cadre d'applications de balisage aéronautique au sol.
Les exigences complémentaires et l'utilisation des dispositifs de connexion sont définies dans différentes parties de la série IEC 61820.
Les dispositifs de connexion conformes au présent document sont adaptés à une utilisation dans des conditions d'environnement de classe E11, conformément à l'IEC 61820-1.
Električne inštalacije za razsvetljavo in radijske javljalnike na letališčih - Povezovalne naprave - Splošne zahteve in preskusi (IEC 63067:2020)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 63067:2020
01-november-2020
Električne inštalacije za razsvetljavo in radijske javljalnike na letališčih -
Povezovalne naprave - Splošne zahteve in preskusi (IEC 63067:2020)
Electrical installations for lighting and beaconing of aerodromes - Connecting devices -
General requirements and tests (IEC 63067:2020)
Elektrische Anlagen für Beleuchtung und Befeuerung von Flugplätzen - Steckverbinder -
Allgemeine Anforderungen und Prüfungen (IEC 63067:2020)
Installations électriques pour l'éclairage et le balisage des aérodromes - Dispositifs de
connexion - Exigences générales et essais (IEC 63067:2020)
Ta slovenski standard je istoveten z: EN IEC 63067:2020
ICS:
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
93.120 Gradnja letališč Construction of airports
SIST EN IEC 63067:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 63067:2020
---------------------- Page: 2 ----------------------
SIST EN IEC 63067:2020
EUROPEAN STANDARD EN IEC 63067
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2020
ICS 29.140.50; 93.120
English Version
Electrical installations for lighting and beaconing of aerodromes -
Connecting devices - General requirements and tests
(IEC 63067:2020)
Installations électriques pour l'éclairage et le balisage des Elektrische Anlagen für Beleuchtung und Befeuerung von
aérodromes - Dispositifs de connexion - Exigences Flugplätzen - Steckverbinder - Allgemeine Anforderungen
générales et essais und Prüfungen
(IEC 63067:2020) (IEC 63067:2020)
This European Standard was approved by CENELEC on 2020-07-29. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63067:2020 E
---------------------- Page: 3 ----------------------
SIST EN IEC 63067:2020
EN IEC 63067:2020 (E)
European foreword
The text of document 97/216/FDIS, future edition 1 of IEC 63067, prepared by IEC/TC 97 "Electrical
installations for lighting and beaconing of aerodromes" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN IEC 63067:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-04-29
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-07-29
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 63067:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60445 NOTE Harmonized as EN 60445
IEC 61820 (series) NOTE Harmonized as EN IEC 61820 (series)
IEC 61823 NOTE Harmonized as EN 61823
ISO 9001 NOTE Harmonized as EN ISO 9001
2
---------------------- Page: 4 ----------------------
SIST EN IEC 63067:2020
EN IEC 63067:2020 (E)
Annex ZA
(normative)
Normative references to international publications with their
corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60352-2 2006 Solderless connections - Part 2: Crimped EN 60352-2 2006
connections - General requirements, test
methods and practical guidance
IEC 60529 - Degrees of protection provided by enclosures - -
(IP Code)
IEC 61820-1 - Electrical installations for aeronautical ground EN IEC 61820-1 -
lighting at aerodromes - Part 1: Fundamental
principles
ISO 2859-1 - Sampling procedures for inspection by - -
attributes; part 1: sampling plans indexed by
acceptable quality level (AQL) for lot-by-lot
inspection
3
---------------------- Page: 5 ----------------------
SIST EN IEC 63067:2020
---------------------- Page: 6 ----------------------
SIST EN IEC 63067:2020
IEC 63067
®
Edition 1.0 2020-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electrical installations for lighting and beaconing of aerodromes – Connecting
devices – General requirements and tests
Installations électriques pour l'éclairage et le balisage des aérodromes –
Dispositifs de connexion – Exigences générales et essais
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.50; 93.120 ISBN 978-2-8322-8516-9
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN IEC 63067:2020
– 2 – IEC 63067:2020 © IEC 2020
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 General requirements . 8
5 General remarks on tests . 9
6 Ratings . 9
7 Classification . 9
8 Marking and documentation . 10
9 Checking of dimensions . 11
10 Protection against electric shock . 13
11 Provision for continuity of screened cable . 13
12 Terminations of conductors . 14
12.1 General . 14
12.2 Terminations for connecting devices which are attached to conductor(s) on
the field. 14
12.3 Terminals for screen continuity . 14
13 Construction of connecting device and their assemblies . 15
13.1 Housing . 15
13.2 Pins and sockets . 15
13.3 Caps . 15
13.4 Connecting device assemblies . 15
13.4.1 Class A . 15
13.4.2 Class B . 16
14 Protection against ingress of water . 17
15 Insulation resistance and electrical connection of connecting device assembly . 17
15.1 General . 17
15.2 Insulation resistance of plugs and receptacles . 17
15.3 Insulation resistance of connecting device assembly . 18
15.4 Electrical connection of contact assembly . 19
16 Forces necessary to disengage and engage the parts of the connecting devices . 19
17 Cables and their connection . 20
18 Resistance to weathering, corrosion and chemical materials . 21
19 Resistance to UV-radiation . 21
Annex A (normative) Production test . 22
A.1 General . 22
A.2 Production test . 22
A.2.1 Dielectric test . 22
A.2.2 Continuity test . 22
A.2.3 Test results. 22
Bibliography . 23
---------------------- Page: 8 ----------------------
SIST EN IEC 63067:2020
IEC 63067:2020 © IEC 2020 – 3 –
Figure 1 – Primary plug (IEC 61823) . 11
Figure 2 – Primary receptacle (IEC 61823) . 11
Figure 3 – Secondary plug . 12
Figure 4 – Secondary receptacle. 12
Figure 5 – Secondary receptacle with moulded frangible coupler . 13
Figure 6 – Example of test arrangement to verify the fixation of pins in the body of the
insertion piece . 17
Figure 7 – Example of voltage drop test arrangement . 19
Figure 8 – Example of apparatus for verification of withdrawal force . 20
Table 1 – Classification of connecting devices . 10
Table 2 – Interface dimensions of primary plug and receptacle . 12
Table 3 – Interface dimensions for secondary plugs and receptacles . 13
---------------------- Page: 9 ----------------------
SIST EN IEC 63067:2020
– 4 – IEC 63067:2020 © IEC 2020
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRICAL INSTALLATIONS
FOR LIGHTING AND BEACONING OF AERODROMES –
CONNECTING DEVICES – GENERAL REQUIREMENTS AND TESTS
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC
Publication(s)"). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 63067 has been prepared by IEC technical committee 97:
Electrical installations for lighting and beaconing of aerodromes.
The text of this International Standard is based on the following documents:
FDIS Report on voting
97/216/FDIS 97/217/RVD
Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
---------------------- Page: 10 ----------------------
SIST EN IEC 63067:2020
IEC 63067:2020 © IEC 2020 – 5 –
In this document, the following print types are used:
– conformity statements: in italic type.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
---------------------- Page: 11 ----------------------
SIST EN IEC 63067:2020
– 6 – IEC 63067:2020 © IEC 2020
INTRODUCTION
This document is based on the Federal Aviation Administration circular AC No. 150/5345-26D,
which is listed in the bibliography for convenience.
---------------------- Page: 12 ----------------------
SIST EN IEC 63067:2020
IEC 63067:2020 © IEC 2020 – 7 –
ELECTRICAL INSTALLATIONS
FOR LIGHTING AND BEACONING OF AERODROMES –
CONNECTING DEVICES – GENERAL REQUIREMENTS AND TESTS
1 Scope
This document applies to plugs and receptacles for single or multiple pole connecting devices
used for aeronautical ground lighting applications.
Additional requirements and usage of connecting devices are given in different parts of
IEC 61820 series.
Connecting devices complying with this document are suitable for use in environmental class
E11 according to IEC 61820-1.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their
content constitutes requirements of this document. For dated references, only the edition
cited applies. For undated references, the latest edition of the referenced document (including
any amendments) applies.
IEC 60352-2:2006, Solderless connections – Part 2: Crimped connections – General
requirements, test methods and practical guidance
IEC 60529, Degrees of protection provided by enclosures (IP Code)
IEC 61820-1, Electrical installations for aeronautical ground lighting at aerodromes – Part 1:
Fundamental principles
ISO 2859-1, Sampling procedures for inspection by attributes – Part 1: Sampling schemes
indexed by acceptance quality limit (AQL) for lot-by-lot inspection
3 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 61820-1, and the
following apply.
NOTE Where the terms "voltage" and "current" are used in this document, they are RMS values, unless otherwise
specified.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
3.1
plug
accessory having pin(s) designed to engage with the socket contact(s) of a receptacle,
incorporating means for the electrical connection and insulated mechanical casting for
retention of cable or wires
---------------------- Page: 13 ----------------------
SIST EN IEC 63067:2020
– 8 – IEC 63067:2020 © IEC 2020
[SOURCE: IEC 60050-442:1998, 442-03-01, modified – "socket-outlet" was replaced by
"receptacle", “mechanical retention” was replaced by “insulated mechanical casting for
retention” and "cords" was replaced by "wires".]
3.2
receptacle
accessory having socket contact(s) designed to engage with the pin(s) of a plug, incorporating
means for the electrical connection and insulated mechanical casting for retention of cables
and wires
3.3
type test
conformity test made on one or more items representative of the production
3.4
production test
test that is carried out for samples of certain lot according to ISO 2859-1
3.5
class A connecting device
accessory that is completed by insulating material moulded around pre-assembled
components that are terminated to cable(s) or wire(s) in factory
3.6
class B connecting device
accessory consisting of a pre-moulded housing and interface contacts that are meant to be
assembled on the field
3.7
primary circuit
electric circuit that transfers energy from a power source to the primary winding of an AGL
transformer
3.8
secondary circuit
electric circuit that transfers energy from the secondary winding of the AGL transformer to a
load
3.9
screen continuity conductor
copper wire used to make a connection to the screen of a cable for the purpose of continuity
or earthing
4 General requirements
Plugs and receptacles shall be so designed and constructed that, in normal use, their
performance is reliable, and safety is achieved by reducing risk to a tolerable level in airfield
environment.
Compliance is checked by meeting all the relevant requirements and tests specified in this
document.
---------------------- Page: 14 ----------------------
SIST EN IEC 63067:2020
IEC 63067:2020 © IEC 2020 – 9 –
5 General remarks on tests
5.1 Tests shall be carried out to check compliance with the relevant requirements of this
document.
Tests are as follows:
– type tests shall be made on representative specimens of each type of connecting device;
– production tests shall be made according to Annex A.
Conditions of 5.2 to 5.5 are applicable to type tests.
5.2 Tests shall be carried out at 23 °C ± 3 °C unless otherwise defined.
5.3 Test shall be performed on six pairs (plugs and receptacles) of samples of each style to
demonstrate compliance with the requirements in this document.
All tested connecting devices shall pass all the relevant tests of this document. Failure of any
one of the connecting devices in any one of the tests shall indicate failure of this product to
comply with this specification unless otherwise noted in a particular test.
5.4 Assembled connecting devices of class A, shall be subjected to all the relevant tests of
this document.
5.5 Class B connecting devices shall be assembled in accordance with the manufacturer’s
instructions to lengths of wire or cable, as appropriate, of at least 0,6 m for all the relevant
tests of this document.
6 Ratings
Rated values for receptacles and plugs are according to IEC 61820-1 voltage classes.
NOTE For connecting devices different rating voltages are used. E.g. 600 V or 750 V between phases and
1 500 V between ground and phase.
7 Classification
Connecting devices are classified as shown in Table 1.
---------------------- Page: 15 ----------------------
SIST EN IEC 63067:2020
– 10 – IEC 63067:2020 © IEC 2020
Table 1 – Classification of connecting devices
Type Class Interface Figure Style Cable Type Dimensions
Figure 1 Style 2 One-core cable
Plug
Figure 1 Style 15 Screened/Shielded
Class A
(Factory moulded)
Type I
Figure 2 Style 9 One-core cable
(1 conductor,
Receptacle
25 A, 5 000 V) Figure 2 Style 16 Screened/Shielded
Table 2
Primary
Figure 1 Style 3 One-core cable
Plug
connecting
Figure 1 Style 13 Screened/Shielded
devices
Class B
(Field assembled)
Figure 2 Style 10 One-core cable
Receptacle
Figure 2 Style 14 Screened/Shielded
Figure 3 Style 1 Two single wires
Plug
Figure 3 Style 6 Two single wires
Class A
(Factory moulded)
Type II
Figure 4 Style 7 Two-core cable
(2 conductor,
Receptacle
Figure 5 Style 8 Two-core cable
20 A, 1 000 V)
Table 3
Secondary Plug Figure 3 Style 4 Two single wires
connecting
Receptacle Figure 4 Style 11 Two single wires
devices
Class B
(Field assembled)
Plug Figure 3 Style 5 Two-core cable
Figure 4 Two-core cable
Receptacle Style 12
NOTE 1 Figures refer only to the interface of the connecting devices.
NOTE 2 If a new type of connecting device is required, new configurations will be introduced on this table.
NOTE 3 A new system for connecting devices of secondary circuit, parallel circuits, ELV systems including
multipole constructions, which defines arrangement of contacts and their combinations including earthing
(grounding) contact and pilot/signalling contacts, if any, will be introduced in future as systems become
available.
NOTE 4 Column "Style" is for information and it refers to different configurations of connecting devices which
are given in Federal Aviation Administration circular AC No. 150/5345-26D.
8 Marking and documentation
8.1 Connecting devices shall be marked with manufacturer’s name, product identification or
catalogue number, style and type reference of a product.
Compliance is checked by inspection.
8.2 Markings shall be readily visible. Minimum height of letters/symbols shall be 3 mm.
Compliance is checked by inspection.
8.3 Markings shall be made impression, moulding, pressing or engraving or any other
method that provides legibility over life time of the product.
Compliance is checked by inspection.
---------------------- Page: 16 ----------------------
SIST EN IEC 63067:2020
IEC 63067:2020 © IEC 2020 – 11 –
8.4 The manufacturer’s installation instructions shall be furnished with each class B
connecting device.
8.5 The manufacturer’s installation instructions for class A connecting devices shall include
instructions how to ensure that counter parts of primary connecting devices do not separate
from each other after installation.
8.6 The manufacturer’s installation instructions shall include necessary instructions for
maintenance of connecting devices.
9 Checking of dimensions
9.1 Each plug and receptacle shall conform to the dimensions of appropriate Figure 1,
Figure 2, Figure 3, Figure 4 or Figure 5 and Table 2 and Table 3.
Compliance is checked by inspection and measurement.
NOTE The sketch is not intended to govern design except as regards the dimensions shown.
Figure 1 – Primary plug (IEC 61823)
NOTE The sketch is not intended to govern design except as regards the dimensions shown.
Figure 2 – Primary receptacle (IEC 61823)
---------------------- Page: 17 ----------------------
SIST EN IEC 63067:2020
– 12 – IEC 63067:2020 © IEC 2020
Table 2 – Interface dimensions of primary plug and receptacle
Dimension Dimension
mm
D 27,00 ± 0,2
E 4,70 ± 0,05
F 27,43 min
I 15,2 ± 0,1
J 15,4 0/+0,2
a
K 23,5 ± 0,5
L 14,3 0/+0,3
M 15,3 −0,1/+0,2
b
P 4,8 ± 0/+0,2
a
Dimension K shall remain unchanged within a
distance of 15 mm from the interface (behind
dimension I towards the cable).
b
Diameter before splitting.
NOTE The sketch is not intended to govern design except as regards the dimensions shown.
Figure 3 – Secondary plug
NOTE The sketch is not intended to govern design except as regards the dimensions shown.
Figure 4 – Secondary receptacle
---------------------- Page: 18 ----------------------
SIST EN IEC 63067:2020
IEC 63067:2020 © IEC 2020 – 13 –
NOTE The sketch is not intended to govern design except as regards the dimensions shown.
Figure 5 – Secondary receptacle with moulded frangible coupler
Table 3 – Interface dimensions for secondary plugs and receptacles
Dimension Dimension
mm
a 3,94 ± 0,05
b 3,15 ± 0,05
c 15,90 −0,4/0
d 8,7 ± 0,4
e 11,0 ± 0,2
f 18,4 0/ +0,2
g 25,0 ± 0,4
a
h 4,0 ± 0,05
a
j 3,20 ± 0,05
k 16,3 min
l 9,1 0/+0,4
m 17,5 ± 0,2
n 28,6 ± 0,8
o 38,1 ± 0,8
p 44,4 ± 0,8
a
Diameter before splitting.
10 Protection against electric shock
Protective measures against electric shock shall be practiced according to national safety
regulations and electrical maintenance instructions of airports.
11 Provision for continuity of screened cable
11.1 Plug and receptacle for screened cables shall be provided with screen continuity
conductors. The length of each screen continuity conductor shall be at least 300 mm in order
to ensure the continuity of the circuit when the main circuit is opened.
---------------------- Page: 19 ----------------------
SIST EN IEC 63067:2020
– 14 – IEC 63067:2020 © IEC 2020
11.2 Screen continuity conductor can be insulated or bare.
2
11.3 Minimum cross-section area of screen continuity conductors shall be at least 2,5 mm .
Compliance of 11.1 to 11.3 is checked by inspection.
11.4 The connection between the screen and
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.