This document specifies a molecular absorption spectrophotometric method for the determination of titanium content in nickel alloys. The method is applicable to titanium contents between 0,3 % (mass fraction) and 5,0 % (mass fraction). Molybdenum, if present in the alloy, can cause a high bias in the reported titanium value to the extent of 0,001 % Ti for every 1,0 % Mo. NOTE 1 Evidence exists that extension of this method is possible for titanium contents down to 0,05 % (mass fraction). NOTE 2 ...view more

    • sale 15% off
    • Draft
      8 pages
      English language
    • sale 15% off
    • Standard
      8 pages
      English language

This document specifies an infrared absorption method after combustion in an induction furnace for
the determination of the sulfur content in ferronickels in the range of 0,002 % to 0,12 %.
The method is applicable to normal production operations. It uses commercially available equipment,
which is calibrated using steel and/or ferronickel certified reference materials (CRMs).

    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      16 pages
      English language
    • e-Library read for
      1 day

This document specifies an infrared absorption method after combustion in an induction furnace for the determination of the sulfur content in ferronickels in the range of 0,002 % to 0,12 %.
The method is applicable to normal production operations. It uses commercially available equipment, which is calibrated using steel and/or ferronickel certified reference materials (CRMs).

    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      16 pages
      English language
    • e-Library read for
      1 day

This document specifies an infrared absorption method after combustion in an induction furnace for the determination of the sulfur content in ferronickels in the range of 0,002 % to 0,12 %. The method is applicable to normal production operations. It uses commercially available equipment, which is calibrated using steel and/or ferronickel certified reference materials (CRMs).

    • sale 15% off
    • Standard
      14 pages
      French language
    • sale 15% off
    • Standard
      12 pages
      English language

This document specifies an infrared absorption method after combustion in an induction furnace for the determination of the carbon content in ferronickels in the range of 0,004 % to 2,5 %. The method is applicable to normal production operations. It uses commercially available equipment, which is calibrated using steel and/or ferronickel certified reference materials (CRMs).

    • sale 15% off
    • Standard
      14 pages
      French language
    • sale 15% off
    • Standard
      12 pages
      English language
    • sale 10% off
    • Amendment
      7 pages
      German language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      9 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements relating to: Heat resisting nickel base alloy Ni-P96-HT Cold drawn and precipitation treated Wire D ≤ 10 mm for aerospace applications.

    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day

This document specifies an inductively coupled plasma optical emission spectrometric method for the determination of tantalum contents between 0,1 % and 5 % in nickel alloys.

    • sale 15% off
    • Standard
      12 pages
      French language
    • sale 15% off
    • Standard
      11 pages
      English language

This document specifies the approach to be followed when developing procedures for the ultrasonic
testing of the following welds:
— welds in stainless steels;
— welds in nickel-based alloys;
— welds in duplex steels;
— dissimilar metal welds;
— austenitic welds.
The purposes of the testing can be very different, for example:
— for the assessment of quality level (manufacturing);
— for the detection of specific discontinuities induced in service.
Acceptance levels are not included in th...
view more

    • sale 10% off
    • Draft
      27 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day

ISO 11437:2018 specifies an electrothermal atomic absorption spectrometric method for the determination of lead in the range of 1 µg/g to 10 µg/g in nickel alloys.

    • sale 15% off
    • Standard
      15 pages
      English language

ISO 7529:2017 specifies a potentiometric titration method for the determination of chromium content in nickel alloys which do not contain insoluble carbides and which have a vanadium content less than a mass fraction of 0,2 %. The method is applicable to chromium contents between a mass fraction of 5 % and a mass fraction of 22 %. Vanadium, which can be present as an impurity in the alloy, will give a positive bias interference. However, at a level of a mass fraction of 0,2 %, this bias is equiv...view more

    • sale 15% off
    • Standard
      5 pages
      English language

ISO 6283:2017 specifies the designation and chemical composition of grades of refined nickel.

    • sale 15% off
    • Standard
      3 pages
      English language

This European Standard is part of a series of standards, details of this series are given in prEN ISO 15607, annex A.
This standard specifies how a preliminary welding procedure specification is qualified by welding procedure tests.
This standard defines the conditions for the execution of welding procedure tests and the range of qualification for welding procedures for all practical welding operations within the range of variables listed in clause 8.
Tests shall be carried out in accordance ...
view more

    • sale 10% off
    • Standard
      50 pages
      German language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      49 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      50 pages
      German language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      49 pages
      English language
    • e-Library read for
      1 day

This part of ISO 7530 describes flame atomic absorption spectrometric methods for the determination
of cobalt, chromium, copper, iron, and manganese in nickel alloys which can be dissolved in the nitrichydrochloric
acids mixture specified.
For each element, the method is applicable to the content range between 0,01 % and 4 %.

    • sale 15% off
    • Standard
      23 pages
      French language
    • sale 15% off
    • Standard
      23 pages
      English language
    • sale 10% off
    • Standard
      28 pages
      English language
    • e-Library read for
      1 day

ISO/TS 18223:2015 describes an inductively coupled plasma atomic emission spectrometric method for the determination of nickel content (mass fraction) between 20,0 % and 80,0 % in nickel alloys. Besides alloys where nickel is the main component regarding its content level, this method may also apply to alloys in which nickel has a content as high as several other elements (Fe, Cr, Co,?) and in which the "main element" cannot be specified.

    • sale 15% off
    • Technical specification
      15 pages
      French language
    • sale 15% off
    • Technical specification
      15 pages
      English language

This International Standard prescribes requirements for the classification of nickel and nickel-alloy
covered electrodes for manual metal arc welding and overlaying. It includes those compositions in
which the nickel content exceeds that of any other element.

    • sale 10% off
    • Draft
      22 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      26 pages
      English language
    • e-Library read for
      1 day

ISO 7530-1:2015 describes flame atomic absorption spectrometric methods for the determination of cobalt, chromium, copper, iron, and manganese in nickel alloys which can be dissolved in the nitric-hydrochloric acids mixture specified. For each element, the method is applicable to the content range between 0,01 % and 4 %.

    • sale 15% off
    • Standard
      23 pages
      French language
    • sale 15% off
    • Standard
      23 pages
      English language
    • sale 10% off
    • Standard
      28 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements for semi-finished products, bars and rods for fasteners with properties specified at elevated and/or low temperatures made of non-alloy and alloy (including stainless) steels and nickel alloys as given in Table 1. The requirements of this standard may be applied also to the finished fasteners. The general technical delivery conditions in EN 10021 also apply to products supplied in accordance with this European Standard.

    • sale 10% off
    • Standard
      49 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements for semi-finished products, bars and rods for fasteners with properties specified at elevated and/or low temperatures made of non-alloy and alloy (including stainless) steels and nickel alloys as given in Table 1.
The requirements of this standard may be applied also to the finished fasteners.
The general technical delivery conditions in EN 10021 also apply to products supplied in accordance with this European Standard.
NOTE   Once this European Sta...
view more

    • sale 10% off
    • Standard
      49 pages
      English language
    • e-Library read for
      1 day

This International Standard provides quality levels of imperfections in laser-arc hybrid welded joints for all types of steel, nickel and its alloys. Three quality levels are given in order to permit application for a wide range of welded fabrication. They are designated by symbols B, C and D. Quality level B corresponds to the highest requirement on the finished weld. The quality levels refer to production quality and not to the fitness-for-purpose (see 3.2) of the product manufactured.

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      38 pages
      English language
    • e-Library read for
      1 day