91.180 - Interior finishing

This European Standard specifies requirements for dimensions, adhesion of yarns and grades of
colour fastness to light, gives the symbols, to be used for marking purposes, for some of these
characteristics and also for matching, methods of application and removal, specifies
requirements for marking and gives the designation system. The marking requirements of this
standard are primarilyfor information of the consumer and to enable optimum use to be made of
the product.
The marking requirem...view more

This document defines terms of interest to the users of wallcoverings that are supplied in roll form for hanging on to walls and ceilings by means of an adhesive.
This document also provides the necessary definitions and symbols for the purposes of other European Standards for wallcoverings (see references in 3.1).
Table 1 gives the symbols to be used.

Deals with the safety of electric outdoor barbecues for household and similar use, their rated voltage being not more than 250 V. This standard does not apply to barbecues for indoor use, appliances intended to burn charcoal or similar combustible fuels, appliances intended exclusively for industrial purposes, appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapor or gas).

Deals with the safety of electric outdoor barbecues for household and similar use, their rated voltage being not more than 250 V. This standard does not apply to barbecues for indoor use, appliances intended to burn charcoal or similar combustible fuels, appliances intended exclusively for industrial purposes, appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapor or gas).

This European Standard:
-   specifies requirements for dimensions and marking;
-   gives the symbols to be used for marking purposes, for matching, methods of application and removal.
The marking requirements of this Standard are primarily for information of the consumer and to enable optimum use to be made of the product.
This standard applies to wallcoverings for subsequent decoration supplied in rolls for hanging on to walls and ceilings by means of an adhesive covering the whole of the i...view more

This document:
-   specifies requirements for dimensions and marking;
-   gives the symbols to be used for marking purposes, for matching, methods of application and removal.
The marking requirements of this document are primarily for information for the consumer and to еnаblе optimum use to be made of the product.
This document applies to wallcoverings for subsequent decoration supplied in rolls for hanging on to walls and ceilings by means of an adhesive, covering the whole of the interface be...view more

This European Standard applies to all forms of wallcovering products in roll form supplied for hanging onto internal walls, partitions or ceilings, by means of an adhesive, whose primary purpose is decorative. However, certain wallcovering products may confer minor sound absorption and thermal resistance properties.
It also provides for the evaluation of conformity and the assessment and verification of constancy of performance (AVCP) of products to the requirements of this standard.
It does n...view more

This document applies to wallcoverings in roll form supplied for hanging onto internal walls, partitions or ceilings, by means of an adhesive, whose primary purpose is decorative. However, certain wallcoverings in roll form may confer minor sound absorption and thermal resistance properties.
The European Standards for wallcoverings in roll form to which this document relates, and which provide additional product definitions and requirements, include the following:
-   finished wallpapers, wall v...view more

This European Standard:
-   specifies requirements for finished wallpapers, wall vinyls and plastics wallcoverings;
-   specifies requirements for marking;
-   gives the designation system.
The marking requirements of this standard are primarily for the consumer's information to enable optimum selection of the product.
This standard applies to finished wallpapers, wall vinyls and plastics wallcoverings not intended for subsequent decoration supplied in rolls for hanging on indoor walls and ceilin...view more

This European Standard:
-   specifies requirements for finished wallpapers, wall vinyls and plastics wallcoverings;
-   specifies requirements for marking;
-   gives the designation system.
The marking requirements of this standard are primarily for the consumer's information to enable optimum selection of the product.
This standard applies to finished wallpapers, wall vinyls and plastics wallcoverings not intended for subsequent decoration supplied in rolls for hanging on indoor walls and ceilin...view more

This European Standard specifies the characteristics of floor coverings based on polyvinyl chloride and modifications thereof, on jute or polyester backing or on polyester felt with polyvinyl chloride backing, supplied in either tile or roll form.
To encourage the consumer to make an informed choice the standard includes a classification system (see EN 685) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for mar...view more

This Technical Report provides details on the rules and recommendations for the installation of works carried
out using fibrous (gypsum) plaster casts as defined in European Standard EN 13815, with instructions and
details about construction.
Fibrous (gypsum) plaster casts from the three categories of production below (see 4.1 of EN 13815:2006)
should be involved in this Technical Report:
a) "cpp" allowing regulatory marking CE,
b) "cppv" allowing regulatory marking CE,
c) "ipp" either wh...view more

This European Standard specifies the characteristics of agglomerated cork with a wear layer based on polyvinyl chloride and modifications thereof.
To encourage the consumer to make an informed choice, the European Standard includes a classification system (see EN 685) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking.

This European Standard specifies the characteristics of floor coverings based on polyvinyl chloride and modifications thereof with a cork-based backing, supplied in either tile or roll form.
To encourage the consumer to make an informed choice, the standard includes a classification system (see EN 685) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking

Deals with the safety of electric outdoor barbecues for household and similar use, their rated voltage being not more than 250 V. This standard does not apply to barbecues for indoor use, appliances intended to burn charcoal or similar combustible fuels, appliances intended exclusively for industrial purposes, appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapor or gas). This consolidated version co...view more

Outcome of TC 61 meeting in November 2007: dow of 60 months for those amendments which bring a change in the scope concerning the limitation clause (see also BT132/DG7310/INF)

This document:
-   specifies requirements for dimensions, adhesion of yarns and grades of colour fastness to light;
-   gives the symbols, to be used for marking purposes, for some of these characteristics and also for matching, methods of application and removal;
-   specifies requirements for marking;
-   gives the designation system.
The marking requirements of this document are primarily for the information of the consumer and to enable optimum use of the product.
This document applies to text...view more

This document defines terms of interest to the users of wallcoverings that are supplied in roll form for hanging on to walls and ceilings by means of an adhesive.
This document also provides the necessary definitions and symbols for the purposes of other European Standards for wallcoverings (see references in 3.1).
Table 1 gives the symbols to be used.