ASTM E1359-02(2008)

Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies

SIGNIFICANCE AND USE
The use of this survey form will provide the auditor with a guide for evaluating an agency.
3.1.1 The description of the agency’facility and its organization will aid the auditor in determining if the agency has adequate capacity and capability to fulfill the contractual requirement.
3.1.2 A review of the agency’policies and/or practices will aid the auditor in determining if the agency has adequate controls on its system.
3.1.3 A review of the agency’records will aid the auditor in determining if the facility complies with its own written policies or practices, or both.
The recommendations set forth in this guide are minimums and should be supplemented by the user, as necessary, to meet the specific requirements of the contract.
The use of this survey form provides the auditor with a permanent record and includes a corrective action request.
SCOPE
1.1 This guide establishes areas for review and provides a survey form that can be used in determining the competence of a nondestructive testing agency.
1.1.1 Criteria from Practices E 543, E 1212, and ASNT SNT-TC-1A, ANSI/ASNT CP-189, and ACCP-Rev. 1, were used in the preparation of this guide.
1.2 Areas for review should include, but are not limited to, the following: description of the agency, its facilities and organization; documentation of policies or practices, or both, including a) contract review, b) equipment calibration, and c) personnel qualifications.

General Information

• Status: Historical
• Publication Date: 14-Feb-2008
• ICS: 03.120.20 - Product and company certification. Conformity assessment
• ICS: 19.100 - Non-destructive testing
• Technical Committee: E07 - Nondestructive Testing
• Drafting Committee: E07.09 - Nondestructive Testing Agencies

Relations

• Replaces: ASTM E1359-02 - Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies
• Effective Date: 15-Feb-2008
• Replaced By: ASTM E1359-09 - Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies
• Effective Date: 01-Jul-2009
• Referred By: ASTM E1212-17 - Standard Practice for Establishing Quality Management Systems for Nondestructive Testing Agencies
• Effective Date: 15-Feb-2008
• Referred By: ASTM E543-21 - Standard Specification for Agencies Performing Nondestructive Testing
• Effective Date: 15-Feb-2008

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:E1359–02 (Reapproved 2008)
Standard Guide for
1
Evaluating Capabilities of Nondestructive Testing Agencies
This standard is issued under the fixed designation E 1359; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope ASNT Recommended Practice SNT-TC-1A Personnel
Qualification and Certification in Nondestructive Testing
1.1 This guide establishes areas for review and provides a
ANSI/ASNT CP-189 Standard for Qualification and Certi-
survey form that can be used in determining the competence of
fication of Nondestructive Testing Personnel
a nondestructive testing agency.
ACCP Rev. 1 ASNT Central Certification Program
1.1.1 Criteria from Practices E 543, E 1212, and ASNT
IRRSP Industrial Radiographer and Radiation Safety Pro-
SNT-TC-1A, ANSI/ASNT CP-189, and ACCP-Rev. 1, were
gram
used in the preparation of this guide.
1.2 Areas for review should include, but are not limited to,
3. Significance and Use
the following: description of the agency, its facilities and
3.1 Theuseofthissurveyformwillprovidetheauditorwith
organization; documentation of policies or practices, or both,
a guide for evaluating an agency.
including a) contract review, b) equipment calibration, and c)
3.1.1 The description of the agency’s facility and its orga-
personnel qualifications.
nization will aid the auditor in determining if the agency has
2. Referenced Documents adequate capacity and capability to fulfill the contractual
2
requirement.
2.1 ASTM Standards:
3.1.2 Areview of the agency’s policies and/or practices will
E 543 Specification for Agencies Performing Nondestruc-
aid the auditor in determining if the agency has adequate
tive Testing
controls on its system.
E 994 Guide for Calibration and Testing Laboratory Ac-
3.1.3 A review of the agency’s records will aid the auditor
creditation Systems General Requirements for Operation
3
in determining if the facility complies with its own written
and Recognition
policies or practices, or both.
E 1212 Practice for Quality Management Systems for Non-
3.2 The recommendations set forth in this guide are mini-
destructive Testing Agencies
4
mums and should be supplemented by the user, as necessary, to
2.2 ASNT/ANSI Documents:
meet the specific requirements of the contract.
3.3 The use of this survey form provides the auditor with a
1
This guide is under the jurisdiction of ASTM Committee E07 on Nondestruc-
permanent record and includes a corrective action request.
tiveTesting and is the direct responsibility of Subcommittee E07.09 on Nondestruc-
tive Testing Agencies.
4. Keywords
Current edition approved Feb. 15, 2008. Published February 2008. Originally
approved in 1990. Last previous edition approved in 2002 as E1359 - 02. 4.1 agency; equipment; facilities; personnel; quality assur-
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
ance; survey
contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM
Standards volume information, refer to the standard’s Document Summary page on
the ASTM website.
3
Withdrawn.
4
AvailablefromAmericanSocietyforNondestructiveTesting(ASNT),P.O.Box
28518, 1711 Arlingate Ln., Columbus, OH 43228-0518, http://www.asnt.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
E1359–02 (2008)
Survey Number __________
Survey Date ____________
SURVEY OF NONDESTRUCTIVE TESTING AGENCY FACILITIES
(Part A)
I.AGENCY’S LEGAL NAME AND ADDRESS:
__________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________
______________________________________________________________________________ ZIP ________________________________
TELEPHONE ( )_________________________
II.PERSONNEL CONTACTED:
NAME: __________________________________ TITLE: ____________________________
_________________________________________ ___________________________________
_________________________________________ ___________________________________
III.TYPE OF SERVICE/EXAMINATION PERFORMED:
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
IV.DESCRIPTION OF FACILITIES:
IN-HOUSE: Square Feet
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
An American National Standard Designation: E 1359 – 02 (Reapproved 2008)
Designation:E1359–99
Standard Guide for
1
Evaluating Capabilities of Nondestructive Testing Agencies
This standard is issued under the fixed designation E 1359; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope
1.1 This guide establishes areas for review and provides a survey form that can be used in determining the competence of a
nondestructive testing agency.
1.1.1 Criteria from Practices E 543, E 1212, and ASNT SNT-TC-1A, CP-189, ANSI/ASNT CP-189, and ACCP-Rev. 1, were
used in the preparation of this guide.
1.2 Areas for review should include, but are not limited to, the following: description of the agency, its facilities and
organization; documentation of policies or practices, or both, including a) contract review, b) equipment calibration, and c)
personnel qualifications.
2. Referenced Documents
2
2.1 ASTM Standards:
E 543Practice Specification for Agencies Performing Nondestructive Testing
E 994 Guide for Calibration and Testing Laboratory Accreditation Systems General Requirements for Operation and
Recognition
E 1212 Practice for Quality ControlManagement Systems for Nondestructive Testing Agencies
3
2.2 ASNT/ANSI Documents:
SNT-TC-1ARecommended Practice for Personnel Qualification and Certification in Nondestructive Testing ASNT Recom-
mended Practice SNT-TC-1A Personnel Qualification and Certification in Nondestructive Testing
ANSI/ASNT CP-189 Standard for Qualification and Certification of Nondestructive Testing Personnel
4
ACCP Rev. 1ASNT Central Certification Program ASNT Central Certification Program
IRRSP Industrial Radiographer and Radiation Safety Program
3. Significance and Use
3.1 The use of this survey form will provide the auditor with a guide for evaluating an agency.
3.1.1 The description of the agency’s facility and its organization will aid the auditor in determining if the agency has adequate
capacity and capability to fulfill the contractural requirement.
3.1.2 Areview of the agency’s policies and/or practices will aid the auditor in determining if the agency has adequate controls
on its system.
3.1.3 A review of the agency’s records will aid the auditor in determining if the facility complies with its own written policies
or practices, or both.
3.2 The recommendations set forth in this guide are minimums and should be supplemented by the user, as necessary, to meet
the specific requirements of the contract.
3.3 The use of this survey form provides the auditor with a permanent record and includes a corrective action request.
4. Keywords
4.1 agency; equipment; facilities; personnel; quality assurance; survey
1
This guide is under the jurisdiction of ASTM Committee E-7 on Nondestructive Testing and is the direct responsibility of Subcommittee E07.09 on Nondestructive
Testing Laboratories.
Current edition approved June 10, 1999. Published August 1999. Originally published as E1359–90. Last previous edition E1359–98a.
1
This guide is under the jurisdiction of ASTM Committee E07 on Nondestructive Testing and is the direct responsibility of Subcommittee E07.09 on Nondestructive
Testing Agencies.
Current edition approved Feb. 15, 2008. Published February 2008. Originally approved in 1990. Last previous edition approved in 2002 as E1359 - 02.
2
For referencedASTM standards, visit theASTM website, www.astm.org, or contactASTM Customer Service at [e-mail]. For Annual Book ofASTM Standards
, Vol 03.03.volume information, refer to the standard’s Document Summary page on the ASTM website.
3
Annual Book of ASTM Standards, Vol 14.02.
3
Available from American Society for Nondestructive Testing (ASNT), P.O. Box 28518, 1711 Arlingate Ln., Columbus, OH 43228-0518, http://www.asnt.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
E1359–02 (2008)
Survey Number __________
Survey Date ____________
SURVEY OF NONDESTRUCTIVE TESTING AGENCY FACILITIES
(Part A)
I.AGENCY’S LEGAL NAME AND ADDRESS:
__________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________
...