ASTM F1019M-00(2006)

Standard Specification for Steel Deck Gear Stowage Box [Metric]

ABSTRACT
This specification covers the material and design requirements for the manufacture of two types of steel deck gear stowage boxes. This specification, though, does not include life preserver or pyrotechnic stowages. The materials used in the construction of this box and its packaging shall be free of asbestos and cadmium, and the entire finished assembly shall be free of weld spatter, slag, splinters, sharp edges, projections, and other defects that may be hazardous to personnel.
SCOPE
1.1 This specification covers the design, material, and manufacture of steel deck gear stowage boxes.
1.2 This specification shall not be used for life preserver or pyrotechnic stowage.
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

General Information

• Status: Historical
• Publication Date: 30-Apr-2006
• ICS: 21.200 - Gears
• ICS: 47.020.50 - Deck equipment and installations
• Technical Committee: F25 - Ships and Marine Technology
• Drafting Committee: F25.03 - Outfitting and Deck Machinery

Relations

• Replaces: ASTM F1019M-00 - Standard Specification for Steel Deck Gear Stowage Box [Metric]
• Effective Date: 01-May-2006
• Replaced By: ASTM F1019M-00(2012) - Standard Specification for Steel Deck Gear Stowage Box [Metric]
• Effective Date: 01-Oct-2012

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:F1019M −00(Reapproved 2006) An American National Standard
Standard Specification for
Steel Deck Gear Stowage Box [Metric]
This standard is issued under the fixed designation F1019M; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope 4. Ordering Information
1.1 This specification covers the design, material, and
4.1 Order using this ASTM designation, year of issue, and
manufacture of steel deck gear stowage boxes.
type.
1.2 This specification shall not be used for life preserver or
5. Materials and Manufacture
pyrotechnic stowage.
5.1 Materials:
1.3 The values stated in SI units are to be regarded as the
standard. The values given in parentheses are for information
5.1.1 The steel for the deck box shall be in accordance with
only. Specification A36/A36M.
5.1.2 Nuts, bolts, and washers shall be corrosion-resistant
2. Referenced Documents
materials.
5.1.3 Materials used in construction of this box and its
2.1 ASTM Standards:
packaging shall be free of asbestos and cadmium.
A36/A36M Specification for Carbon Structural Steel
A123/A123M Specification for Zinc (Hot-Dip Galvanized)
5.2 Manufacture:
Coatings on Iron and Steel Products
5.2.1 Stowage boxes shall be constructed in accordance
2.2 Other Documents:
with figures appearing in this standard.
ABS Rules for Building and Classing Steel Vessels
5.2.2 Welding shall be in accordance with ABS Rules for
SSPC Specification 6
Building and Classing Steel Vessels or AWS D1.1 Structural
AWS D1.1 Structural Welding Code
Welding Code unless otherwise specified.
3. Classification
6. Dimensions and Tolerances
3.1 Deck Gear Stowage Boxes, shall be the following types:
6.1 Dimensions are as indicated.
3.1.1 TypeI—ConformingtoalldimensionsinFig.1,Fig.2,
6.2 Tolerance—1.5 mm (6 ⁄16 in.).
Fig. 3, Fig. 4, Fig. 5, Fig. 6, Fig. 7, Fig. 8, and Fig. 9.
3.1.2 Type II—Conforming only to Fig. 1 configuration and
7. Workmanship, Finish, and Appearance
meeting the requirements of Sections 4-7, dimensions and
material specification made to fit unique requirements of
7.1 The entire assembly shall be free of weld spatter, slag,
customer.
splinters, sharp edges, projections, and other defects that may
be hazardous to personnel.
7.2 Theboxshallbecleanedafterassemblytoacommercial
This specification is under the jurisdiction of ASTM Committee F25 on Ships
finish in accordance with SSPC-SP6.
and Marine Technology and is the direct responsibility of Subcommittee F25.03 on
Outfitting and Deck Machinery.
7.3 All surfaces except gratings and covers shall be coated
Current edition approved May 1, 2006. Published May 2006. Originally
with one coat of commercial quality anticorrosive, lead-free,
approved
...