ASTM A29/A29M-11
(Specification)Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
ABSTRACT
This guide covers a group of requirements for carbon and alloy steel bars under each of the following specifications: hot-rolled carbon steel bars, cold-finished carbon steel bars, hot-rolled alloy steel bars, and cold-finished alloy steel bars. Heat and product analysis shall be performed on several grades of carbon steel bars, wherein the material shall conform to the required chemical composition for carbon, manganese, phosphorus, and sulfur. Several grades of alloy steel bars shall also undergo heat and product analysis and shall meet the required chemical composition for carbon, manganese, phosphorus, sulfur, silicon, nickel, chromium, and molybdenum. When compositions other than those indicated in the specified chemical components are required, the composition limits shall be prepared using the specified ranges and limits for carbon steel and alloy steel. The material shall undergo grain size test and shall conform to the specified grain size requirement. Mechanical tests shall also be performed on the steel test specimens.
SCOPE
1.1 This specification covers a group of common requirements which, unless otherwise specified in the purchase order or in an individual specification, shall apply to carbon and alloy steel bars under each of the following ASTM specifications (or under any other ASTM specification which invokes this specification or portions thereof): Title of SpecificationASTM
DesignationA Hot-Rolled Carbon Steel Bars: Steel Bars, Carbon, Quenched and Tempered A321 Steel Bars and Shapes, Carbon Rolled from “T'' Rails A499 Steel Bars, Carbon, Merchant Quality, M-Grades A575 Steel Bars, Carbon, Hot-Wrought, Special Quality A576 Steel Bars, Carbon, Merchant Quality, Mechanical Properties A663/A663M Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties A675/A675M Steel Bars for Springs, Carbon and Alloy A689 Cold-Finished Carbon Steel Bars: Steel Bars, Carbon and Alloy, Cold-Finished A108 Cold-Drawn Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements A311/A311M Hot-Rolled Alloy Steel Bars: Steel Bars, Alloy, Standard Grades A322 Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements A304 Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered A434 Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both A739 Cold-Finished Alloy Steel Bars: Steel Bars, Alloy, Hot-Rolled or Cold-Finished, Quenched and Tempered A434 Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components A696
A These designations refer to the latest issue of the respective specifications, which appear either in the Annual Book of ASTM Standards, Vol 01.05, or as reprints obtainable from ASTM.
1.2 In case of any conflict in requirements, the requirements of the purchase order, the individual material specification, and this general specification shall prevail in the sequence named.
1.3 The values stated in inch-pound units or SI units are to be regarded as the standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.
1.4 For purposes of determining conformance to this specification and the various material specifications referenced in 1.1, dimensional values shall be rounded to the nearest unit in the right-hand place of figures used in expressing the limiting values in accordance with the rounding method of Practice E29.
Note 1—Specification A29 previously listed dimensional tolerances for cold-finished bars; these are now found in Specification A108.
General Information
Relations
Buy Standard
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: A29/A29M – 11
Standard Specification for
Steel Bars, Carbon and Alloy, Hot-Wrought, General
1
Requirements for
This standard is issued under the fixed designation A29/A29M; the number immediately following the designation indicates the year
of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.
A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope* 1.3 The values stated in inch-pound units or SI units are to
2 be regarded as the standard. Within the text, the SI units are
1.1 This specification covers a group of common require-
shown in brackets. The values stated in each system are not
ments which, unless otherwise specified in the purchase order
exact equivalents; therefore, each system must be used inde-
orinanindividualspecification,shallapplytocarbonandalloy
pendentlyoftheother.Combiningvaluesfromthetwosystems
steel bars under each of the followingASTM specifications (or
may result in nonconformance with the specification.
under any other ASTM specification which invokes this
1.4 For purposes of determining conformance to this speci-
specification or portions thereof):
fication and the various material specifications referenced in
Title of Specification ASTM
A
1.1, dimensional values shall be rounded to the nearest unit in
Designation
Hot-Rolled Carbon Steel Bars:
the right-hand place of figures used in expressing the limiting
Steel Bars, Carbon, Quenched and Tempered A321
values in accordance with the rounding method of Practice
Steel Bars and Shapes, Carbon Rolled from “T’’ Rails A499
E29.
Steel Bars, Carbon, Merchant Quality, M-Grades A575
Steel Bars, Carbon, Hot-Wrought, Special Quality A576
NOTE 1—Specification A29 previously listed dimensional tolerances
Steel Bars, Carbon, Merchant Quality, Mechanical A663/A663M
Properties for cold-finished bars; these are now found in Specification A108.
Steel Bars, Carbon, Hot-Wrought, Special Quality, Me- A675/A675M
chanical Properties
2. Referenced Documents
Steel Bars for Springs, Carbon and Alloy A689
3
2.1 ASTM Standards:
Cold-Finished Carbon Steel Bars:
Steel Bars, Carbon and Alloy, Cold-Finished A108
A108 Specification for Steel Bar, Carbon and Alloy, Cold-
Cold-Drawn Stress-Relieved Carbon Steel Bars Sub- A311/A311M
Finished
ject to Mechanical Property Requirements
Hot-Rolled Alloy Steel Bars: A304 SpecificationforCarbonandAlloySteelBarsSubject
Steel Bars, Alloy, Standard Grades A322
to End-Quench Hardenability Requirements
Carbon and Alloy Steel Bars Subject to End-Quench A304
A311/A311M Specification for Cold-Drawn, Stress-
Hardenability Requirements
Steel Bars, Alloy, Hot-Wrought or Cold-Finished, A434 Relieved Carbon Steel Bars Subject to Mechanical Prop-
Quenched and Tempered
erty Requirements
Steel Bars, Alloy, Hot-Wrought, for Elevated Tempera- A739
A321 Specification for Steel Bars, Carbon, Quenched and
ture or Pressure-Containing Parts, or Both
4
Cold-Finished Alloy Steel Bars: Tempered
Steel Bars, Alloy, Hot-Rolled or Cold-Finished, A434
A322 Specification for Steel Bars, Alloy, Standard Grades
Quenched and Tempered
A370 Test Methods and Definitions for Mechanical Testing
Steel Bars, Carbon, Hot-Wrought or Cold-Finished, A696
Special Quality, for Pressure Piping Components
of Steel Products
A
These designations refer to the latest issue of the respective specifications,
A434 Specification for Steel Bars, Alloy, Hot-Wrought or
which appear either in the Annual Book of ASTM Standards, Vol 01.05, or as
Cold-Finished, Quenched and Tempered
reprints obtainable from ASTM.
A499 Specification for Steel Bars and Shapes, Carbon
1.2 In case of any conflict in requirements, the requirements
Rolled from “T” Rails
of the purchase order, the individual material specification, and
A575 Specification for Steel Bars, Carbon, Merchant Qual-
this general specification shall prevail in the sequence named.
ity, M-Grades
1
This specification is under the jurisdiction of ASTM Committee A01 on Steel,
Stainless Steel and Related Alloys and is the direct responsibility of Subcommittee
3
A01.15 on Bars. For referenced ASTM standards, visit the ASTM website, www.astm.org, or
Current edition approved April 1, 2011. Published May 2011. Originally contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
approved in 1957. Last previous edition approved in 2005 asA29/A29M – 05. DOI: Standards volume information, refer to the standard’s Document Summary page on
10.1520/A0029_A0029M-11. the ASTM website.
2 4
For ASME Boiler and Pressure Vessel Code applications see related Specifi- Withdrawn. The last approved version of this historical standard is referenced
cation SA-29/SA-29M in Section II of that Code
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation:A29/A29M–05 Designation: A29/A29M – 11
Standard Specification for
Steel Bars, Carbon and Alloy, Hot-Wrought, General
1
Requirements for
This standard is issued under the fixed designation A29/A29M; the number immediately following the designation indicates the year
of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.
A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope*
2
1.1 This specification covers a group of common requirements which, unless otherwise specified in the purchase order or in
an individual specification, shall apply to carbon and alloy steel bars under each of the following ASTM specifications (or under
any other ASTM specification which invokes this specification or portions thereof):
Title of Specification ASTM
A
Designation
Hot-Rolled Carbon Steel Bars:
Steel Bars, Carbon, Quenched and Tempered A321
Steel Bars and Shapes, Carbon Rolled from “T’’ Rails A499
Steel Bars, Carbon, Merchant Quality, M-Grades A575
Steel Bars, Carbon, Hot-Wrought, Special Quality A576
Steel Bars, Carbon, Merchant Quality, Mechanical A663/A663M
Properties
Steel Bars, Carbon, Hot-Wrought, Special Quality, Me- A675/A675M
chanical Properties
Steel Bars for Springs, Carbon and Alloy A689
Cold-Finished Carbon Steel Bars:
Steel Bars, Carbon and Alloy, Cold-Finished A108
Cold-Drawn Stress-Relieved Carbon Steel Bars Sub- A311/A311M
ject to Mechanical Property Requirements
Hot-Rolled Alloy Steel Bars:
Steel Bars, Alloy, Standard Grades A322
Carbon and Alloy Steel Bars Subject to End-Quench A304
Hardenability Requirements
Steel Bars, Alloy, Hot-Wrought or Cold-Finished, A434
Quenched and Tempered
Steel Bars, Alloy, Hot-Wrought, for Elevated Tempera- A739
ture or Pressure-Containing Parts, or Both
Cold-Finished Alloy Steel Bars:
Steel Bars, Alloy, Hot-Rolled or Cold-Finished, A434
Quenched and Tempered
Steel Bars, Carbon, Hot-Wrought or Cold-Finished, A696
Special Quality, for Pressure Piping Components
A
These designations refer to the latest issue of the respective specifications, which appear either in the Annual Book of ASTM Standards, Vol 01.05, or as reprints
obtainable from ASTM.
1.2 In case of any conflict in requirements, the requirements of the purchase order, the individual material specification, and this
general specification shall prevail in the sequence named.
1.3 The values stated in inch-pound units or SI units are to be regarded as the standard. Within the text, the SI units are shown
in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the
other. Combining values from the two systems may result in nonconformance with the specification.
1.4 For purposes of determining conformance to this specification and the various material specifications referenced in 1.1,
dimensional values shall be rounded to the nearest unit in the right-hand place of figures used in expressing the limiting values
in accordance with the rounding method of Practice E29.
1
This specification is under the jurisdiction ofASTM CommitteeA01 on Steel, Stainless Steel and RelatedAlloys and is the direct responsibility of SubcommitteeA01.15
on Bars.
´1
Current edition approved May 1, 2005. Published May 2005. Originally approved in 1957. Last previous edition approved in 2004 as A29/A29M–04 . DOI:
10.1520/A0029_A0029M-05.
Current edition approved April 1, 2011. Published May 2011. Originally approved in 1957. Last previous edition approved in 2005 as A29/A29M – 05. DOI:
10.1520/A0029_A0029M-11.
2
For ASME Boiler and Pressure Vessel Code applications see related Specification SA-29/SA-29M in Section II of that Code.
*ASummary of Changes section appears at the end of this standard.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1
---------------------- Page: 1 ----------------------
A29/A29M – 11
NOTE 1—Specification A29 previously listed dimensional tolerances for cold-finished bars; these are now found in Specification A108.
2. Referenced Documents
3
2.1 ASTM Standards:
A108 Specification for Steel Bar, Carbon and Alloy, Cold-Finished
A304 Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
A311/A311M Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
A321 Specific
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation:A29/A29M–05 Designation: A29/A29M – 11
Standard Specification for
Steel Bars, Carbon and Alloy, Hot-Wrought, General
1
Requirements for
This standard is issued under the fixed designation A29/A29M; the number immediately following the designation indicates the year
of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.
A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope*
2
1.1 This specification covers a group of common requirements which, unless otherwise specified in the purchase order or in
an individual specification, shall apply to carbon and alloy steel bars under each of the following ASTM specifications (or under
any other ASTM specification which invokes this specification or portions thereof):
Title of Specification ASTM
A
Designation
Hot-Rolled Carbon Steel Bars:
Steel Bars, Carbon, Quenched and Tempered A321
Steel Bars and Shapes, Carbon Rolled from “T’’ Rails A499
Steel Bars, Carbon, Merchant Quality, M-Grades A575
Steel Bars, Carbon, Hot-Wrought, Special Quality A576
Steel Bars, Carbon, Merchant Quality, Mechanical A663/A663M
Properties
Steel Bars, Carbon, Hot-Wrought, Special Quality, Me- A675/A675M
chanical Properties
Steel Bars for Springs, Carbon and Alloy A689
Cold-Finished Carbon Steel Bars:
Steel Bars, Carbon and Alloy, Cold-Finished A108
Cold-Drawn Stress-Relieved Carbon Steel Bars Sub- A311/A311M
ject to Mechanical Property Requirements
Hot-Rolled Alloy Steel Bars:
Steel Bars, Alloy, Standard Grades A322
Carbon and Alloy Steel Bars Subject to End-Quench A304
Hardenability Requirements
Steel Bars, Alloy, Hot-Wrought or Cold-Finished, A434
Quenched and Tempered
Steel Bars, Alloy, Hot-Wrought, for Elevated Tempera- A739
ture or Pressure-Containing Parts, or Both
Cold-Finished Alloy Steel Bars:
Steel Bars, Alloy, Hot-Rolled or Cold-Finished, A434
Quenched and Tempered
Steel Bars, Carbon, Hot-Wrought or Cold-Finished, A696
Special Quality, for Pressure Piping Components
A
These designations refer to the latest issue of the respective specifications, which appear either in the Annual Book of ASTM Standards, Vol 01.05, or as reprints
obtainable from ASTM.
1.2 In case of any conflict in requirements, the requirements of the purchase order, the individual material specification, and this
general specification shall prevail in the sequence named.
1.3 The values stated in inch-pound units or SI units are to be regarded as the standard. Within the text, the SI units are shown
in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the
other. Combining values from the two systems may result in nonconformance with the specification.
1.4 For purposes of determining conformance to this specification and the various material specifications referenced in 1.1,
dimensional values shall be rounded to the nearest unit in the right-hand place of figures used in expressing the limiting values
in accordance with the rounding method of Practice E29.
1
This specification is under the jurisdiction ofASTM CommitteeA01 on Steel, Stainless Steel and RelatedAlloys and is the direct responsibility of SubcommitteeA01.15
on Bars.
´1
Current edition approved May 1, 2005. Published May 2005. Originally approved in 1957. Last previous edition approved in 2004 as A29/A29M–04 . DOI:
10.1520/A0029_A0029M-05.
Current edition approved April 1, 2011. Published May 2011. Originally approved in 1957. Last previous edition approved in 2005 as A29/A29M – 05. DOI:
10.1520/A0029_A0029M-11.
2
For ASME Boiler and Pressure Vessel Code applications see related Specification SA-29/SA-29M in Section II of that Code.
*ASummary of Changes section appears at the end of this standard.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1
---------------------- Page: 1 ----------------------
A29/A29M – 11
NOTE 1—Specification A29 previously listed dimensional tolerances for cold-finished bars; these are now found in Specification A108.
2. Referenced Documents
3
2.1 ASTM Standards:
A108 Specification for Steel Bar, Carbon and Alloy, Cold-Finished
A304 Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
A311/A311M Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
A321 Specific
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.