iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM E1218-04(2012)

(Guide)

Standard Guide for Conducting Static Toxicity Tests with Microalgae (Withdrawn 2021)

Standard Guide for Conducting Static Toxicity Tests with Microalgae (Withdrawn 2021)

SIGNIFICANCE AND USE
5.1 Tests with algae provide information on the toxicity of test materials to an important component of the aquatic biota and might indicate whether additional testing (1)4 is desirable.  
5.2 Algae are ubiquitous in aquatic ecosystems, where they incorporate solar energy into biomass, produce oxygen, function in nutrient cycling and serve as food for animals. Because of their ecological importance, sensitivity to many toxicants, ready availability, ease of culture, and fast growth rates (rendering it possible to conduct a multi-generation test in a short period of time), algae are often used in toxicity testing.  
5.3 Results of algal toxicity tests might be used to compare the sensitivities of different species of algae and the toxicities of different materials to algae and to study the effects of various environmental factors on results of such tests.  
5.4 Results of algal toxicity tests might be an important consideration when assessing the hazards of materials to aquatic organisms (See Guide E1023) or deriving water quality criteria for aquatic organisms (2).  
5.5 Results of algal toxicity tests might be useful for studying biological availability of, and structure-activity relationships between, test materials.  
5.6 Results of algal toxicity tests will depend on the temperature, composition of the growth medium, and other factors. These tests are conducted in solutions that contain concentrations of salts, minerals, and nutrients that greatly exceed those in most surface waters. These conditions may over- or under-estimate the effects of the test material if discharged to surface waters.
SCOPE
1.1 This guide covers procedures for obtaining laboratory data concerning the adverse effects of a test material added to growth medium on growth of certain species of freshwater and saltwater microalgae during a static exposure. These procedures will probably be useful for conducting short-term toxicity tests with other species of algae, although modifications might be necessary. Although the test duration is comparable to an acute toxicity test with aquatic animals, an algal toxicity test of short duration (72, 96 or 120 h) allows for examination of effects upon multiple generations of an algal population and thus should not be viewed as an acute toxicity test.  
1.2 Other modifications of these procedures might be justified by special needs or circumstances. Although using appropriate procedures is more important than following prescribed procedures, results of tests conducted using unusual procedures are not likely to be comparable to results of many other tests. Comparison of results obtained using modified and unmodified versions of these procedures might provide useful information concerning new concepts and procedures for conducting toxicity tests with microalgae.  
1.3 These procedures are applicable to many chemicals, either individually or in formulations, commercial products, or known mixtures. With appropriate modifications, these procedures can be used to conduct tests on temperature, and pH and on such materials as aqueous effluents (see also Guide E1192), leachates, oils, particulate matter, sediments, and surface waters. Static tests might not be applicable to materials that are highly volatile, are rapidly biologically or chemically transformed in aqueous solutions, or are removed from test solutions in substantial quantities by the test vessels or organisms during the test. However, practical flow-through test procedures with microalgae have not been developed.  
1.4 Results of tests using microalgae should usually be reported in terms of the 96-h (or other time period) IC50 (see 3.2.5) based on reduction in growth. In some situations, it might only be necessary to determine whether a specific concentration unacceptably affects the growth of the test species or whether the IC50 is above or below a specific concentration.  
1.5 This guide is arranged as follows:    
...

General Information

Status
Historical
Publication Date
30-Nov-2012
ICS
07.100.20 - Microbiology of water
Technical Committee
E50 - Environmental Assessment, Risk Management and Corrective Action
Drafting Committee
E50.47 - Biological Effects and Environmental Fate
Current Stage
Ref Project

Buy Standard

ASTM E1218-04(2012) - Standard Guide for Conducting Static Toxicity Tests with Microalgae (Withdrawn 2021)ASTM E1218-04(2012) - Standard Guide for Conducting Static Toxicity Tests with Microalgae (Withdrawn 2021)
PreviousNext
Guide
ASTM E1218-04(2012) - Standard Guide for Conducting Static Toxicity Tests with Microalgae (Withdrawn 2021)
English language
14 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: E1218 − 04 (Reapproved 2012)
Standard Guide for
1,2
Conducting Static Toxicity Tests with Microalgae
This standard is issued under the fixed designation E1218; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope 1.4 Results of tests using microalgae should usually be
reported in terms of the 96-h (or other time period) IC50 (see
1.1 This guide covers procedures for obtaining laboratory
3.2.5) based on reduction in growth. In some situations, it
data concerning the adverse effects of a test material added to
might only be necessary to determine whether a specific
growth medium on growth of certain species of freshwater and
concentration unacceptably affects the growth of the test
saltwater microalgae during a static exposure. These proce-
species or whether the IC50 is above or below a specific
dures will probably be useful for conducting short-term toxic-
concentration.
ity tests with other species of algae, although modifications
mightbenecessary.Althoughthetestdurationiscomparableto 1.5 This guide is arranged as follows:
anacutetoxicitytestwithaquaticanimals,analgaltoxicitytest
Section
Referenced Documents 2
of short duration (72, 96 or 120 h) allows for examination of
Terminology 3
effects upon multiple generations of an algal population and
Summary of Guide 4
thus should not be viewed as an acute toxicity test.
Significance and Use 5
Hazards 7
1.2 Other modifications of these procedures might be justi-
Apparatus 6
fied by special needs or circumstances.Although using appro- Facilities 6.1
Equipment 6.2
priate procedures is more important than following prescribed
Test Vessels 6.3
procedures,resultsoftestsconductedusingunusualprocedures
Cleaning 6.4
Acceptability 6.5
are not likely to be comparable to results of many other tests.
Growth Medium 8
Comparisonofresultsobtainedusingmodifiedandunmodified
Test Material 9
versions of these procedures might provide useful information
General 9.1
concerning new concepts and procedures for conducting tox- Stock Solution 9.2
Test Concentration(s) 9.3
icity tests with microalgae.
Test Organisms 10
Species 10.1
1.3 These procedures are applicable to many chemicals,
Source 10.2
either individually or in formulations, commercial products, or
Culture 10.3
known mixtures. With appropriate modifications, these proce-
Quality 10.4
Procedure 11
dures can be used to conduct tests on temperature, and pH and
Experimental Design 11.1
on such materials as aqueous effluents (see also Guide E1192),
Temperature 11.2
leachates, oils, particulate matter, sediments, and surface wa-
Illumination 11.3
Beginning the Test 11.4
ters. Static tests might not be applicable to materials that are
Gas Exchange 11.5
highly volatile, are rapidly biologically or chemically trans-
Duration of Test 11.6
formed in aqueous solutions, or are removed from test solu-
Biological Data 11.7
Other Measurements 11.8
tions in substantial quantities by the test vessels or organisms
Determination of Algistatic and Algicidal Effects 11.8.5
during the test. However, practical flow-through test proce-
Analytical Methodology 12
dures with microalgae have not been developed.
Acceptability of Test 13
Calculation 14
Report 15
1
ThisguideisunderthejurisdictionofASTMCommitteeE50onEnvironmental
Keywords 16
Assessment, Risk Management and CorrectiveAction and is the direct responsibil-
1.6 This standard does not purport to address all of the
ity of Subcommittee E50.47 on Biological Effects and Environmental Fate.
safety concerns, if any, associated with its use. It is the
Current edition approved Dec. 1, 2012. Published December 2012. Originally
approved in 1990. Last previous edition approved in 2004 as E1218-04. DOI:
responsibility of the user of this standard to establish appro-
10.1520/E1218-04R12.
priate safety and health practices and determine the applica-
2
Thisstandardguideisadocument,developedusingtheconsensusmechanisms
bility of regulatory limitations prior to use. Specific hazard
of ASTM, that provides guidance for the selection of procedures to accomplish a
specific test, but which does not stipulate specific procedures. statements are given in Section 7.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
E1218 − 04 (2012)
3
2. Referenced Documents measure accurately, surrogate measures of biomass, such as
cell counts, are typically used in this test.
2.1 ASTM Standards:
3.2.4 growth rate—the increase in biomass per unit of time.
D1129Terminology Relating to Water
D3731Practices
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM E1023-23(Guide)
Standard Guide for Assessing the Hazard of a Material to Aquatic Organisms and Their Uses

SIGNIFICANCE AND USE
5.1 Adverse effects on natural populations of aquatic organisms and their uses have demonstrated the need to assess the hazards of many new, and some presently used, materials. The process described herein will help producers, users, regulatory agencies, and others to efficiently and adequately compare alternative materials, completely assess a final candidate material, or reassess the hazard of a material already in use.  
5.2 Sequential assessment and feedback allow appropriate judgments concerning efficient use of resources, thereby minimizing unnecessary testing and focusing effort on the information most pertinent to each material. For different materials and situations, assessment of hazard will appropriately be based on substantially different amounts and kinds of biological, chemical, physical, and toxicological data.  
5.3 Assessment of the hazard of a material to aquatic organisms and their uses should never be considered complete for all time. Reassessment should be considered if the amount of production, use, or disposal increases, new uses are discovered, or new information on biological, chemical, physical, or toxicological properties becomes available. Periodic review will help assure that new circumstances and information receive prompt appropriate attention.  
5.4 If there is substantial transformation to another material, the hazard of both materials may need to be assessed.  
5.5 In many cases, consideration of adverse effects should not end with completion of the hazard assessment. Additional steps should often include risk assessment, decisions concerning acceptability of identified hazards and risks, and mitigative actions.  
5.6 Because this practice deals mostly with adverse effects on aquatic organisms and their uses, it is important that mitigative actions, such as improved treatment of aqueous effluents, not result in unacceptable effects on non-aquatic organisms. Thus, this standard should be used with other information in order to a...
SCOPE
1.1 This guide describes a stepwise process for using information concerning the biological, chemical, physical, and toxicological properties of a material to identify adverse effects likely to occur to aquatic organisms and their uses as a result of release of the material to the environment. The material will usually be a specific chemical, although it might be a group of chemicals that have very similar biological, chemical, physical, and toxicological properties and are usually produced, used, and discarded together.  
1.2 The hazard assessment process is complex and requires decisions at a number of points; thus, the validity of a hazard assessment depends on the soundness of those decisions, as well as the accuracy of the information used. All decisions should be based on reasonable worst-case analyses so that an appropriate assessment can be completed for the least cost that is consistent with scientific validity.  
1.3 This guide assumes that the reader is knowledgeable in aquatic toxicology and related pertinent areas. A list of general references is provided (1).2  
1.4 This guide does not describe or reference detailed procedures for estimating or measuring environmental concentrations, or procedures for determining the maximum concentration of test material that is acceptable in the food of predators of aquatic life. However, this guide does describe how such information should be used when assessing the hazard of a material to aquatic organisms and their uses.  
1.5 Because assessment of hazard to aquatic organisms and their uses is a relatively new activity within aquatic toxicology, most of the guidance provided herein is qualitative rather than quantitative. When possible, confidence limits should be calculated and taken into account.  
1.6 This guide provides guidance for assessing hazard but does not provide guidance on how to take into account social considerations in order to judge the acceptabil...

  • Guide
    18 pages
    English language
    sale 15% off
  • Guide
    18 pages
    English language
    sale 15% off
ASTM
ASTM E1562-22(Guide)
Standard Guide for Conducting Acute, Chronic, and Life-Cycle Aquatic Toxicity Tests with Polychaetous Annelids

SIGNIFICANCE AND USE
5.1 Polychaetes are an important component of the benthic community, in which they generally comprise 30 to 50 % of the macroinvertebrate population. They are preyed upon by many species of fish, birds, and larger invertebrate species. Larger polychaetes feed on small invertebrates, larval stages of invertebrates, and algae. Polychaetes are especially sensitive to inorganic toxicants and, to a lesser extent, to organic toxicants (1).4 The ecological importance of polychaetes and their wide geographical distribution, ability to be cultured in the laboratory, and sensitivity to contaminants make them appropriate acute and chronic toxicity test organisms. Their relatively short life cycle enables the investigator to measure the effect of contaminants on reproduction.  
5.2 An acute toxicity or chronic text is conducted to obtain information concerning the immediate effects of an exposure to a test material on a test organism under specified experimental conditions. An acute toxicity test provides data on the short-term effects, which are useful for comparisons to other species but do not provide information on delayed effects. Chronic toxicity tests provide data on long-term effects.  
5.3 A life-cycle toxicity test is conducted to determine the effects of the test material on survival, growth, and reproduction of the test species. Additional sublethal endpoints (for example, biochemical, physiological, and histopathological) may be used to determine the health of the species under field conditions.  
5.4 The results of acute, chronic, and life-cycle toxicity tests can be used to predict effects likely to occur on marine organisms under field conditions.  
5.5 The results of acute, chronic, or life-cycle toxicity tests might be used to compare the sensitivities of different species and the toxicities of different test materials, as well as to study the effects of various environmental factors on the results of such tests.  
5.6 The results of acute, chronic, or li...
SCOPE
1.1 This guide covers procedures for obtaining data concerning the adverse effects of a test material added to marine and estuarine waters on certain species of polychaetes during short- or long-term continuous exposure. The polychaete species used in these tests are either field collected or from laboratory cultures and exposed to varying concentrations of a toxicant in static or static-renewal conditions. These procedures may be useful for conducting toxicity tests with other species of polychaetes, although modifications might be necessary.  
1.2 Modifications of these procedures might be justified by special needs or circumstances. Although using appropriate procedures is more important than following prescribed procedures, the results of tests conducted using unusual procedures are not likely to be comparable to those of many other tests. Comparisons of results obtained using modified and unmodified versions of these procedures might provide useful information concerning new concepts and procedures for conducting acute, chronic, or life-cycle tests with other species of polychaetes.  
1.3 These procedures are applicable to most chemicals, either individually or in formulations, commercial products, and known or unknown mixtures. With appropriate modifications, these procedures can be used to conduct these tests on factors such as temperature, salinity, and dissolved oxygen. These procedures can also be used to assess the toxicity of potentially toxic discharges such as municipal wastes, sediments/soils, oil drilling fluids, produced water from oil well production, and other types of industrial wastes. An LC50 (medial lethal concentration) may be calculated from the data generated in each acute and chronic toxicity test when multiple concentrations are tested. Growth, determined by a change in measured weight, and reproduction, as the change in total number of organisms, are used to measure the effect of a toxicant...

  • Guide
    23 pages
    English language
    sale 15% off
  • Guide
    23 pages
    English language
    sale 15% off
ASTM
ASTM E1295-22(Guide)
Standard Guide for Conducting Three-Brood, Renewal Toxicity Tests with Ceriodaphnia dubia

SIGNIFICANCE AND USE
5.1 Ceriodaphnia  was first used as a toxicity test organism by Mount and Norberg (2). Introduced for use in effluent and ambient water evaluations, Ceriodaphnia have also been a valuable addition to single chemical test procedures.  
5.2 Protection of a population requires prevention of unacceptable effects on the number, weight, health, and uses of the individuals of that species, or species for which the test species serves as a surrogate. A three-brood toxicity test is conducted to help determine changes in survival and the number of neonates produced that result from exposure to the test material.  
5.3 Results of three-brood toxicity tests with C. dubia might be used to predict chronic or partial chronic effects on species in field situations as a result of exposure under comparable conditions.  
5.4 Results of three-brood toxicity tests with C. dubia might be compared with the chronic sensitivities of different species and the chronic toxicities of different materials, and to study the effects of various environmental factors on results of such tests.  
5.5 Results of three-brood toxicity tests with C. dubia might be useful for predicting the results of chronic tests on the same test material with the same species in another water or with another species in the same or a different water. Most such predictions are based on the results of acute toxicity tests, and so the usefulness of the results of a three-brood toxicity test with C. dubia might be greatly increased by also reporting the results of an acute toxicity test (see Guides E729 and E1192) conducted under the same conditions. In addition to conducting an acute test with unfed C. dubia, it might also be desirable to conduct an acute test in which the organisms are fed the same as in the three-brood test, to see if the presence of that concentration of that food affects the results of the acute test and the acute chronic ratio (see 10.4.1).  
5.5.1 A 48 or 96-h EC50 or LC50 can sometimes be obtaine...
SCOPE
1.1 This guide describes procedures for obtaining data concerning the adverse effects of an effluent or a test material (added to dilution water, but not to food) on Ceriodaphnia dubia Richard 1894, during continuous exposure throughout a portion of the organism's life. These procedures should also be useful for conducting life cycle toxicity tests with other Cladocera (Guide E1193), although modifications will be necessary.  
1.2 These procedures are applicable to most chemicals, either individually or in formulations, commercial products, or known mixtures, that can be measured accurately at the necessary concentrations in water. With appropriate modifications these procedures can be used to conduct tests on temperature, dissolved oxygen, pH, dissolved ions, and on such materials as aqueous effluents (see also Guide E1192), leachates, oils, particulate matter, sediments (see also Guide E1706), and surface waters. Renewal tests might not be applicable to materials that have high oxygen demand, are highly volatile, are rapidly biologically or chemically transformed, or sorb to test chambers. If the concentration of dissolved oxygen falls below 4 mg/L or the concentration of test material decreases by more than 20 % in test solution(s) at any concentration between renewals, more frequent renewals might be necessary.  
1.3 Other modifications of these procedures might be justified by special needs or circumstances. Results of tests conducted using unusual procedures are not likely to be comparable to results of many other tests. Comparisons of results obtained using modified and unmodified versions of these procedures might provide useful information on new concepts and procedures for conducting three-brood toxicity tests with C. dubia.  
1.4 This guide is arranged as follows:    
Section  
Referenced Documents  
2  
Terminology  
3  
Summary of Guide  
4  
Significance and Use  
5  
Apparatus ...

  • Guide
    21 pages
    English language
    sale 15% off
  • Guide
    21 pages
    English language
    sale 15% off
ASTM
ASTM E1563-21a(Guide)
Standard Guide for Conducting Short-Term Chronic Toxicity Tests with Echinoid Embryos

SIGNIFICANCE AND USE
5.1 An acute toxicity test is conducted to assess effects of a short-term exposure of organisms to a test material under specific experimental conditions. An acute toxicity test does not provide information concerning whether delayed effects will occur and typically evaluates effects on survival. A chronic test is typically longer in duration and includes a sublethal endpoint to assess effects on a population that might occur beyond the exposure period. Because the echinoderm embryo development test includes a sublethal endpoint, but is also short in duration, these tests are considered to be short-term chronic tests, consistent with EPA guidance.  
5.2 Because embryos and larvae are usually assumed to be the most sensitive life stages of these echinoid species, and because some of these species are commercially and recreationally important, the results of these tests are often considered to be a good indication of the acceptability of pollutant concentrations to saltwater species in general. The results of these toxicity tests are often assumed to be an important consideration when assessing the hazard of materials to other saltwater organisms (see Guides E724 and E1023) or when deriving water quality criteria for saltwater organisms  (7).  
5.3 The results of short-term chronic toxicity tests might be used to predict effects likely to occur to aquatic organisms in field situations as a result of exposure under comparable conditions, except that toxicity to benthic species might depend on sorption or settling of the test material onto the substrate.  
5.4 The results of short-term chronic tests might be used to compare the sensitivities of different species and the acute toxicities of different test materials, and to determine the effects of various environmental factors on the results of such tests.  
5.5 The results of short-term chronic toxicity tests might be useful for studying the biological availability of, and structure-activity relationships between, t...
SCOPE
1.1 This guide covers procedures for obtaining laboratory data concerning the short-term chronic effects of a test material on echinoderm embryos and the resulting larvae (sea urchins and sand dollars) during static 48- to 96-h exposures. These procedures have generally been used with U.S. East Coast (Arbacia punctulata and  Strongylocentrotus droebachiensis ) (1)3 and West Coast species (Strongylocentrotus purpuratus, S. droebachiensis, and Dendraster excentricus) (2). The basic procedures described in this guide first originated in Japan and Scandanavia  (3), and parallel procedures have been used with foreign species, especially in Japan and the Mediterranean  (4). These procedures will probably be useful for conducting static toxicity tests with embryos of other echinoid species, although modifications might be necessary.  
1.2 Other modifications of these procedures might be justified by special needs or circumstances. Although using procedures appropriate to a particular species or special needs and circumstances is more important than following prescribed procedures, the results of tests conducted by using unusual procedures are not likely to be comparable with those of many other tests. The comparison of results obtained by using modified and unmodified versions of these procedures might provide useful information concerning new concepts and procedures for conducting tests starting with embryos of echinoids.  
1.3 These procedures are applicable to most chemicals, either individually or in formulations, commercial products, or known mixtures. With appropriate modifications, these procedures can be used to conduct tests on temperature, dissolved oxygen, and pH and on such materials as aqueous effluents (see also Guide E1192), leachates, oils, particulate matter, surface waters, effluents, and sediments (Annex A1). Renewal tests might be preferable to static tests for materials that have a high oxygen demand, are...

  • Guide
    23 pages
    English language
    sale 15% off
  • Guide
    23 pages
    English language
    sale 15% off
ASTM
ASTM E1218-21(Guide)
Standard Guide for Conducting Static Toxicity Tests with Microalgae

SIGNIFICANCE AND USE
5.1 Tests with algae provide information on the toxicity of test materials to an important component of the aquatic biota and might indicate whether additional testing (2) is desirable. Specific testing procedures under various regulatory jurisdictions follow procedures similar to those described in this Guide (3, 4). Users should consult with any specific regulatory requirements to determine the applicability and consistency of this standard with such requirements.  
5.2 Algae are ubiquitous in aquatic ecosystems, where they incorporate solar energy into biomass, produce oxygen, function in nutrient cycling and serve as food for animals. Because of their ecological importance, sensitivity to many toxicants, ready availability, ease of culture, and fast growth rates (rendering it possible to conduct a multi-generation test in a short period of time), algae are often used in toxicity testing.  
5.3 Results of algal toxicity tests might be used to compare the sensitivities of different species of algae and the toxicities of different materials to algae and to study the effects of various environmental factors on results of such tests.  
5.4 Results of algal toxicity tests might be an important consideration when assessing the hazards of materials to aquatic organisms (See Guide E1023) or deriving water quality criteria for aquatic organisms (5).  
5.5 Results of algal toxicity tests might be useful for studying biological availability of, and structure-activity relationships between, test materials.  
5.6 Results of algal toxicity tests will depend on the temperature, composition of the growth medium, and other factors. These tests are conducted in solutions that contain concentrations of salts, minerals, and nutrients that greatly exceed those in most surface waters. These conditions may over- or under-estimate the effects of the test material if discharged to surface waters.
SCOPE
1.1 This guide covers procedures for obtaining laboratory data concerning the adverse effects of a test material added to growth medium on growth of certain species of freshwater and saltwater microalgae during a static exposure. These procedures will probably be useful for conducting short-term toxicity tests with other species of algae, although modifications might be necessary. Although the test duration is comparable to an acute toxicity test with aquatic animals, an algal toxicity test of short duration (72, 96 or 120 h) allows for examination of effects upon multiple generations of an algal population and thus should not be viewed as an acute toxicity test.  
1.2 Other modifications of these procedures might be justified by special needs or circumstances. Although using appropriate procedures is more important than following prescribed procedures, results of tests conducted using unusual procedures are not likely to be comparable to results of many other tests. Comparison of results obtained using modified and unmodified versions of these procedures might provide useful information concerning new concepts and procedures for conducting toxicity tests with microalgae.  
1.3 These procedures are applicable to many chemicals, either individually or in formulations, commercial products, or known mixtures. With appropriate modifications, these procedures can be used to conduct tests on temperature, and pH and on such materials as aqueous effluents (see Guide E1192), leachates, oils, particulate matter, sediments, and surface waters. Static tests might not be applicable to materials that are highly volatile, are rapidly biologically or chemically transformed in aqueous solutions, or are removed from test solutions in substantial quantities by the test vessels or organisms during the test. (1)3 However, practical flow-through test procedures with microalgae have not been developed.  
1.4 Results of tests using microalgae should usually be reported in terms of the 96-h (or other time period) IC50 (see 3.2.5) b...

  • Guide
    14 pages
    English language
    sale 15% off
ASTM
ASTM E724-21(Guide)
Standard Guide for Conducting Static Short-Term Chronic Toxicity Tests Starting with Embryos of Four Species of Saltwater Bivalve Molluscs

SIGNIFICANCE AND USE
5.1 An acute toxicity test is conducted to assess the effects of a short term exposure of organisms to a test material under specific experimental conditions. An acute toxicity test does not provide information concerning whether delayed effects will occur and typically evaluates effects on survival. A chronic test is typically longer in duration and includes a sublethal endpoint to assess effects on a population that might occur beyond the exposure period. Because the bivalve embryo development test includes a sublethal endpoint, but is also short in duration, these tests are considered to be short-term chronic tests.  
5.2 Because embryos and larvae are usually assumed to be the most sensitive life stages of these bivalve mollusc species and because these species are commercially and recreationally important, results of these acute tests are often considered to be a good indication of the acceptability of pollutant concentrations to saltwater molluscan species in general. Results of these acute toxicity tests are often assumed to be an important consideration when assessing the hazard of materials to other saltwater organisms (see Guide E1023) or when deriving water quality criteria for saltwater organisms (3) .  
5.3 Results of short-term chronic toxicity tests might be used to predict effects likely to occur to aquatic organisms in field situations as a result of exposure under comparable conditions, except that toxicity to benthic species might depend on sorption or settling of the test material onto the substrate.  
5.4 Results of short-term chronic tests might be used to compare the sensitivities of different species to different test materials, and to determine the effects of various environmental factors on results of such tests.  
5.5 Results of short-term chronic toxicity tests might be useful for studying biological availability of, and structure activity relationships between, test materials.  
5.6 Results of any toxicity test will depend on temper...
SCOPE
1.1 This guide describes procedures for obtaining laboratory data concerning the acute effects of a test material on embryos and the resulting larvae of four species of saltwater bivalve molluscs (Pacific oyster, Crassostrea gigas Thunberg; eastern oyster,  Crassostrea virginica Gmelin; quahog or hard clam,  Mercenaria mercenaria Linnaeus; and the mussel species complex (Mytilus spp.) including the blue mussel,  Mytilus edulis Linnaeus; the Mediterranean mussel, Mytilus galloprovincialis Lamark; and the Northern Bay Mussel, Mytilus trossulus Gould) during static 48-h exposures. These procedures will probably be useful for conducting static short-term chronic toxicity tests starting with embryos of other bivalve species (1)2 although modifications might be necessary.  
1.2 Other modifications of these procedures might be justified by special needs or circumstances. Although using procedures appropriate to a particular species or special needs and circumstances is more important than following prescribed procedures, results of tests conducted by using unusual procedures are not likely to be comparable to results of many other tests. Comparison of results obtained by using modified and unmodified versions of these procedures might provide useful information concerning new concepts and procedures for conducting 48-h acute tests starting with embryos of bivalve molluscs.  
1.3 These procedures are applicable to most chemicals, either individually or in formulations, commercial products, or known mixtures. With appropriate modifications these procedures can be used to conduct acute tests on temperature, dissolved oxygen, and pH and on such materials as aqueous effluents (see also Guide E1192), leachates, oils, particulate matter, sediments, and surface waters. Renewal tests might be preferable to static tests for materials that have a high oxygen demand, are highly volatile, are rapidly biologically or chemically transformed...

  • Guide
    23 pages
    English language
    sale 15% off
  • Guide
    23 pages
    English language
    sale 15% off
ASTM
ASTM E1193-20(Guide)
Standard Guide for Conducting Daphnia magna Life-Cycle Toxicity Tests

SIGNIFICANCE AND USE
5.1 Protection of an aquatic species requires prevention of unacceptable effects on populations in natural habitats. Toxicity tests are conducted to provide data that may be used to predict what changes in numbers and weights of individuals might result from similar exposure to the test material in the natural aquatic environment. Information might also be obtained on the effects of the material on the health of the species.  
5.2 Results of life-cycle tests with D. magna are used to predict chronic effects likely to occur on daphnids in field situations as a result of exposure under comparable conditions.  
5.2.1 Life-cycle tests with D. magna are used to compare the chronic sensitivities of different species, the chronic toxicities of different materials, and study the effects of various environmental factors on the results of such tests.  
5.2.2 Life-cycle tests with D. magna are used to assess the risk of materials to aquatic organisms (see Guide E1023) or derive water quality criteria for aquatic organisms (1).3  
5.2.3 Life-cycle tests with D. magna are used to extrapolate the results of chronic toxicity tests on the same test material with the same species in another water or with another species in the same or a different water. Most such predictions take into account the results of acute toxicity tests, and so the usefulness of the results of a life-cycle test with D. magna may be increased by reporting the results of an acute toxicity test (see Guide E729) conducted under the same conditions. In addition to conducting an acute toxicity test with unfed D. magna, it may be relevant to conduct an acute test in which the daphnids are fed the same as in the life-cycle test to see if the presence of that concentration of that food affects the results of the acute test and the acute-chronic ratio (ACR) (see 10.3.1).  
5.2.4 Life-cycle tests are used to evaluate the biological availability of, and structure-activity relationships between, test materials and t...
SCOPE
1.1 This guide covers procedures for obtaining laboratory data concerning the adverse effects of a test material (added to dilution water, but not to food) on Daphnia magna Straus, 1820, during continuous exposure throughout a life-cycle using the renewal or flow-through techniques. These procedures also should be useful for conducting life-cycle toxicity tests with other invertebrate species and cladocerans from the same genus (for example, Daphnia pulex), although modifications might be necessary.  
1.2 These procedures are applicable to most chemicals, either individually or in formulations, commercial products, or known mixtures. With appropriate modifications, these procedures can be used to conduct tests on temperature, dissolved oxygen, pH, and on such materials as aqueous effluents (also see Guide E1192), leachates, oils, particulate matter, sediments, and surface waters. The technique, (renewal or flow-through), will be selected based on the chemical characteristics of the test material such as high oxygen demand, volatility, susceptibility to transformation (biologically or chemically), or sorption to glass.  
1.3 Modification of these procedures might be justified by special needs or circumstances. Although using appropriate procedures is more important than following prescribed procedures, results of tests conducted using unusual procedures are not likely to be comparable to results of standard test procedures. Comparison of results obtained using modified and unmodified versions of these procedures might provide useful information on new concepts and procedures for conducting life-cycle toxicity tests with D. magna. Appendix X3 provides modifications for conducting the chronic toxicity test method with D. pulex Leydig, 1860.  
1.4 This guide is arranged as follows:    
Section  
Referenced Documents  
2  
Terminology  
3  
Summary of Guide  
4  
Si...

  • Guide
    21 pages
    English language
    sale 15% off
  • Guide
    21 pages
    English language
    sale 15% off
ASTM
ASTM E1706-20(Test Method)
Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates

SIGNIFICANCE AND USE
5.1 Sediment provides habitat for many aquatic organisms and is a major repository for many of the more persistent chemicals that are introduced into surface waters. In the aquatic environment, most anthropogenic chemicals and waste materials including toxic organic and inorganic chemicals can accumulate in sediment, which can in turn serve as a source of exposure for organisms living on or in sediment. Contaminated sediments may be directly toxic to aquatic life or can be a source of contaminants for bioaccumulation in the food chain.  
5.2 The objective of a sediment test is to determine whether chemicals in sediment are harmful to or are bioaccumulated by benthic organisms. The tests can be used to measure interactive toxic effects of complex chemical mixtures in sediment. Furthermore, knowledge of specific pathways of interactions among sediments and test organisms is not necessary to conduct the tests. Sediment tests can be used to: (1) determine the relationship between toxic effects and bioavailability, (2) investigate interactions among chemicals, (3) compare the sensitivities of different organisms, (4) determine spatial and temporal distribution of contamination, (5) evaluate hazards of dredged material, (6) measure toxicity as part of product licensing or safety testing, (7) rank areas for clean up, and (8) estimate the effectiveness of remediation or management practices.  
5.3 Results of toxicity tests on sediments spiked at different concentrations of chemicals can be used to establish cause and effect relationships between chemicals and biological responses. Results of toxicity tests with test materials spiked into sediments at different concentrations may be reported in terms of a LC50 (median lethal concentration), an EC50 (median effect concentration), an IC50 (inhibition concentration), or as a NOEC (no observed effect concentration) or LOEC (lowest observed effect concentration). However, spiked sediment may not be representative of chemicals a...
SCOPE
1.1 Relevance of Sediment Contamination—Sediment provides habitat for many aquatic organisms and is a major repository for many of the more persistent chemicals that are introduced into surface waters. In the aquatic environment, both organic and inorganic chemicals may accumulate in sediment, which can in turn serve as a source of exposure for organisms living on or in sediment. Contaminated sediments may be directly toxic to aquatic life or can be a source of contaminants for bioaccumulation in the food chain.  
1.2 Sediment Assessment Tools—Several types of information may be useful in assessing the risk, or potential risk, posed by sediment contaminants, including: (1) chemical analysis of sediment contaminants; (2) sediment toxicity tests, (3) bioaccumulation tests; and (4) surveys of benthic community structure. Each of these provides a different type of information to the assessment, and integrating information from all four lines of evidence may often provide the most robust assessments.  
1.3 Strengths of Toxicity Testing of Contaminated Sediments—Directly assessing the toxicity of contaminated sediments provides some of the same advantages to sediment assessment that whole effluent toxicity testing provides to management of industrial and municipal effluents. As for effluent tests, direct testing of sediment toxicity allows the assessment of biological effects even if: (1) the identities of toxic chemicals present are not (or not completely) known; (2) the influence of site-specific characteristics of sediments on toxicity (bioavailability) is not understood; and (3) the interactive or aggregate effects of mixtures of chemicals present are not known or cannot be adequately predicted. In addition, testing the response of benthic or epibenthic organisms exposed via sediment provides an assessment that is based on the same routes of exposure that would exist in nature, rather than only through water column expos...

  • Standard
    162 pages
    English language
    sale 15% off
  • Standard
    162 pages
    English language
    sale 15% off
ASTM
ASTM D8516-23(Test Method)
Standard Test Method for Quantification of Culturable Waterborne Bacteria Using a Defined Culture Medium Coated Plate

SIGNIFICANCE AND USE
5.1 This plate format is useful for the routine monitoring of culturable, waterborne bacteria in potable and non-potable waters. The significance of finding these bacteria can help with identifying water quality or water system problems or evaluate compliance with maintenance protocols. This test method uses small volumes of water, or dilutions thereof, and provides an easy and reliable method that eliminates media preparation and reduces laboratory waste.
SCOPE
1.1 This test method describes a simple procedure for the quantification of culturable, waterborne bacteria in potable water (drinking water, bottled water, and dental water, for example) and non-potable waters (cooling towers, for example).  
1.1.1 The EasyDisc2, 3 plate format is designed to test 1 mL of a water sample on a 47 mm gridded plate containing a growth reagent embedded to the plate’s inner surface.  
1.1.2 Detection is based on colorimetric technology in which viable, aerobic, heterotrophic, waterborne bacteria grow when present in the water sample, displaying a color reaction which allows for a simplified visualization of colony growth.  
1.2 Each plate can accurately detect up to 300 colony forming units per 1 mL (CFU/1 mL) of sample. To increase the quantification range, a sample dilution can be used. Adjust the CFU/mL result to reflect dilutions.  
1.3 This test method can be used for potable (for example, drinking, bottled, and dental) waters and non-potable waters such as cooling tower waters. It is the user’s responsibility to adhere to all requirements by local regulations and ensure the validity of this test method for waters other than those tested as part of the Interlaboratory Study (ILS).  
1.4 The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    6 pages
    English language
    sale 15% off
ASTM
ASTM E1023-23(Guide)
Standard Guide for Assessing the Hazard of a Material to Aquatic Organisms and Their Uses

SIGNIFICANCE AND USE
5.1 Adverse effects on natural populations of aquatic organisms and their uses have demonstrated the need to assess the hazards of many new, and some presently used, materials. The process described herein will help producers, users, regulatory agencies, and others to efficiently and adequately compare alternative materials, completely assess a final candidate material, or reassess the hazard of a material already in use.  
5.2 Sequential assessment and feedback allow appropriate judgments concerning efficient use of resources, thereby minimizing unnecessary testing and focusing effort on the information most pertinent to each material. For different materials and situations, assessment of hazard will appropriately be based on substantially different amounts and kinds of biological, chemical, physical, and toxicological data.  
5.3 Assessment of the hazard of a material to aquatic organisms and their uses should never be considered complete for all time. Reassessment should be considered if the amount of production, use, or disposal increases, new uses are discovered, or new information on biological, chemical, physical, or toxicological properties becomes available. Periodic review will help assure that new circumstances and information receive prompt appropriate attention.  
5.4 If there is substantial transformation to another material, the hazard of both materials may need to be assessed.  
5.5 In many cases, consideration of adverse effects should not end with completion of the hazard assessment. Additional steps should often include risk assessment, decisions concerning acceptability of identified hazards and risks, and mitigative actions.  
5.6 Because this practice deals mostly with adverse effects on aquatic organisms and their uses, it is important that mitigative actions, such as improved treatment of aqueous effluents, not result in unacceptable effects on non-aquatic organisms. Thus, this standard should be used with other information in order to a...
SCOPE
1.1 This guide describes a stepwise process for using information concerning the biological, chemical, physical, and toxicological properties of a material to identify adverse effects likely to occur to aquatic organisms and their uses as a result of release of the material to the environment. The material will usually be a specific chemical, although it might be a group of chemicals that have very similar biological, chemical, physical, and toxicological properties and are usually produced, used, and discarded together.  
1.2 The hazard assessment process is complex and requires decisions at a number of points; thus, the validity of a hazard assessment depends on the soundness of those decisions, as well as the accuracy of the information used. All decisions should be based on reasonable worst-case analyses so that an appropriate assessment can be completed for the least cost that is consistent with scientific validity.  
1.3 This guide assumes that the reader is knowledgeable in aquatic toxicology and related pertinent areas. A list of general references is provided (1).2  
1.4 This guide does not describe or reference detailed procedures for estimating or measuring environmental concentrations, or procedures for determining the maximum concentration of test material that is acceptable in the food of predators of aquatic life. However, this guide does describe how such information should be used when assessing the hazard of a material to aquatic organisms and their uses.  
1.5 Because assessment of hazard to aquatic organisms and their uses is a relatively new activity within aquatic toxicology, most of the guidance provided herein is qualitative rather than quantitative. When possible, confidence limits should be calculated and taken into account.  
1.6 This guide provides guidance for assessing hazard but does not provide guidance on how to take into account social considerations in order to judge the acceptabil...

  • Guide
    18 pages
    English language
    sale 15% off
  • Guide
    18 pages
    English language
    sale 15% off