ASTM D885-02
(Test Method)Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Man-Made Organic-Base Fibers
Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Man-Made Organic-Base Fibers
SCOPE
1.1 These test methods cover the testing of industrial filament yarns made wholly of manufactured organic-base fibers, cords twisted from such yarns, fabrics woven from such cords, and products that are made specifically for use in the manufacture of pneumatic tires. They may be applied to similar yarns and cords used for reinforcing other rubber goods and for other industrial applications. The test methods apply to nylon, polyester, rayon, and aramid yarns and tire cords twisted from such yarns and to fabrics made from such cords. The yarn or cord may be wound on cones, tubes, bobbins, spools, or beams; may be woven into fabric; or may be in some other form. The methods include testing procedure only and include no specifications or tolerances.
1.2 No procedure is included for the determination of fatigue resistance of cord, but several commonly used procedures for the measurement of fatigue resistance of cords in rubber were published in the appendix of these test methods in the 1967 Annual Book of ASTM Standards, Part 24, and in earlier issues of Test Methods D 885.
1.3 The sections on "Growth of Conditioned Yarns and Cords," "Properties of Yarns and Cords at Elevated Temperature," and "Properties of Wet Yarns and Cords" have been moved to as non-mandatory informational items because of their very limited use by the industry and because precision and bias statements are not included.
1.4 This standard includes the following sections: SectionAdhesion of Cord to Elastomers34Bibliography of Tire Cord Test MethodsX5Breaking Strength (Force) of Yarns and Cords at Elevated Tempera-tureX2.3Breaking Strength (Force) of Conditioned Yarns and Cords16Breaking Strength (Force) of Oven-Dried Rayon Yarns and Cords23Breaking Strength (Force) of Rayon Yarns and Cords at SpecifiedMoisture Regain Level, Adjustment of17Breaking Tenacity of Conditioned Yarns and Cords18Breaking Tenacity of Oven-Dried Rayon Yarns and Cords24Breaking Toughness of Yarns and Cords28Commercial Mass9Conditioning7Contraction of Wet Yarns and CordsX3Count of Tire Cord Fabric37Dip (Adhesive) Solids Pickup on Yarns and Cords33Elongation at Break of Conditioned Yarns and Cords19Elongation at Break of Oven-Dried Rayon Yarns and Cords25Elongation of Rayon Yarns and Cords at a Specified Moisture RegainLevel, Adjustment of Observed20Extractable Matter in Yarns and Cords32Force at Specified Elongation (FASE) of Conditioned Yarns andCords21Force at Specified Elongation (FASE) of Oven-Dried Rayon Yarns andCords26Growth of Conditioned Yarns and CordsX1Identification of Fibers8Keywords40Linear Density11Mass of per Unit Area of Tire Cord Fabric36Modulus of Conditioned Yarns and Cords22Moisture Regain, Actual10Precision and Bias of Certain Yarn and Cord Tests39 35 toProperties of Tire Cord Fabric38Sampling6Shrinkage Force of Conditioned Yarns and Cords at Elevated TemperatureX2.5Shrinkage of Conditioned Yarns and Cords at Elevated TemperatureX2.4Significance and Use, General5Significance and Use, Tensile Properties14SI Calculations (examples for work-to-break, specific work-to-break,and breaking toughness)X4Stiffness of Fabric38 12 to Tensile Properties of Yarns and Cords28Terminology3Thickness of Cords31Twist in Yarns and Cords30Width of Tire Cord Fabric35Work-to-Break of Yarns and Cords27
1.5 These test methods show the values in both SI and inch-pound units. SI units is the technically correct name for the system of metric units known as the International System of Units. Inch-pound units is the technically correct name for the customary units used in the United States. The values stated in either acceptable metric units or other units shall be regarded separately as standard. The values expressed in each system may not be exact equivalents; therefore, each system must be used independently of each other, without combining values in any way.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the ...
General Information
Relations
Standards Content (Sample)
NOTICE: This standard has either been superceded and replaced by a new version or discontinued.
Contact ASTM International (www.astm.org) for the latest information.
Designation: D 885 – 02
Standard Test Methods for
Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns
1
Made from Manufactured Organic-Base Fibers
This standard is issued under the fixed designation D 885; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope
Breaking Toughness of Yarns and Cords 28
Commercial Mass 9
1.1 These test methods cover the testing of industrial
Conditioning 7
filament yarns made wholly of manufactured organic-base Contraction of Wet Yarns and Cords X3
Count of Tire Cord Fabric 37
fibers, cords twisted from such yarns, fabrics woven from such
Dip (Adhesive) Solids Pickup on Yarns and Cords 33
cords, and products that are made specifically for use in the
Elongation at Break of Conditioned Yarns and Cords 19
manufacture of pneumatic tires. They may be applied to similar
Elongation at Break of Oven-Dried Rayon Yarns and Cords 25
Elongation of Rayon Yarns and Cords at a Specified Moisture Regain 20
yarns and cords used for reinforcing other rubber goods and for
Level, Adjustment of Observed
other industrial applications. The test methods apply to nylon,
Extractable Matter in Yarns and Cords 32
polyester, rayon, and aramid yarns and tire cords twisted from
Force at Specified Elongation (FASE) of Conditioned Yarns and 21
Cords
such yarns and to fabrics made from such cords. The yarn or
Force at Specified Elongation (FASE) of Oven-Dried Rayon Yarns and 26
cord may be wound on cones, tubes, bobbins, spools, or beams;
Cords
may be woven into fabric; or may be in some other form. The Growth of Conditioned Yarns and Cords X1
Identification of Fibers 8
methods include testing procedure only and include no speci-
Keywords 40
fications or tolerances.
Linear Density 11
1.2 No procedure is included for the determination of Mass of per Unit Area of Tire Cord Fabric 36
Modulus of Conditioned Yarns and Cords 22
fatigue resistance of cord, but several commonly used proce-
Moisture Regain, Actual 10
dures for the measurement of fatigue resistance of cords in
Precision and Bias of Certain Yarn and Cord Tests 39
35 to
rubber were published in the appendix of these test methods in
Properties of Tire Cord Fabric 38
the 1967 Annual Book of ASTM Standards, Part 24, and in
Sampling 6
earlier issues of Test Methods D 885.
Shrinkage Force of Conditioned Yarns and Cords at Elevated Temper-
ature X2.5
1.3 The sections on “Growth of Conditioned Yarns and
Shrinkage of Conditioned Yarns and Cords at Elevated Temperature X2.4
Cords,” “Properties of Yarns and Cords at Elevated Tempera-
Significance and Use, General 5
ture,” and “Properties of Wet Yarns and Cords” have been
Significance and Use, Tensile Properties 14
SI Calculations (examples for work-to-break, specific work-to-break,
moved to Appendix X1-Appendix X3 as non-mandatory infor-
and breaking toughness) X4
mational items because of their very limited use by the industry
Stiffness of Fabric 38
and because precision and bias statements are not included.
12 to
Tensile Properties of Yarns and Cords 28
1.4 This standard includes the following sections:
Terminology 3
Section
Thickness of Cords 31
Adhesion of Cord to Elastomers 34
Twist in Yarns and Cords 30
Bibliography of Tire Cord Test Methods X5
Width of Tire Cord Fabric 35
Breaking Strength (Force) of Yarns and Cords at Elevated Tempera- X2.3
Work-to-Break of Yarns and Cords 27
ture
Breaking Strength (Force) of Conditioned Yarns and Cords 16
1.5 These test methods show the values in both SI and
Breaking Strength (Force) of Oven-Dried Rayon Yarns and Cords 23
inch-pound units. SI units is the technically correct name for
Breaking Strength (Force) of Rayon Yarns and Cords at Specified 17
the system of metric units known as the International System of
Moisture Regain Level, Adjustment of
Breaking Tenacity of Conditioned Yarns and Cords 18
Units. Inch-pound units is the technically correct name for the
Breaking Tenacity of Oven-Dried Rayon Yarns and Cords 24
customary units used in the United States. The values stated in
either acceptable metric units or other units shall be regarded
separately as standard. The values expressed in each system
1
These test methods are under the jurisdiction of ASTM Committee D13 on
may not be exact equivalents; therefore, each system must be
Textiles and are the direct responsibility of Subcommittee D13.19 on Tire Cord and
used independently of each other, without combining values in
Fabrics.
any way.
Current edition approved April 10, 2002. Published July 2002. Originally
1.6 This standard does not purport to address all of the
published as D 885 – 46T. Last previou
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.