ASTM E1975-01e1

Standard Specification for Shelter, Electrical, Equipment S-280/G

SCOPE
1.1 This specification covers one type of lightweight field and mobile shelter designed for transport by cargo truck, fixed or rotary winged aircraft, by rail, and ship, as Shelter, Electrical Equipment S-280/G (see 15.5).
1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
1.3 The following safety hazards caveat refers only to the test methods described in this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Information

• Status: Historical
• Publication Date: 09-Oct-2001
• Technical Committee: E06 - Performance of Buildings
• Drafting Committee: E06.53 - Materials and Processes for Durable Rigidwall Relocatable Structures

Relations

• Replaces: ASTM E1975-01 - Standard Specification for Shelter, Electrical, Equipment S-280/G
• Effective Date: 10-Oct-2001
• Replaced By: ASTM E1975-01a - Standard Specification for Shelter, Electrical, Equipment S-280/G
• Effective Date: 10-Oct-2001

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or discontinued.
Contact ASTM International (www.astm.org) for the latest information.
e1
Designation: E 1975 – 01
Standard Specification for
1
Shelter, Electrical, Equipment S-280/G
This standard is issued under the fixed designation E 1975; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1
e NOTE—An editorial change was made in June 2001.
5
1. Scope with Polysulfide Based Sealants
E 1794 Specification for Adhesive for Bonding Foam Cored
1.1 This specification covers one type of lightweight field
Sandwich Panels (200°F Elevated Humidity Service), Type
and mobile shelter designed for transport by cargo truck, fixed
5
II Panels
or rotary winged aircraft, by rail, and ship, as Shelter, Electrical
E 1801 Practice for Adhesive Bonding of Aluminum Fac-
Equipment S-280/G (see 15.5).
5
ings in Foam and Beam Type Shelters
1.2 The values stated in inch-pound units are to be regarded
E 1851 Test Method for Electromagnetic Shielding Effec-
as the standard. The values given in parentheses are for
5
tiveness of Durable Rigid Wall Relocatable Structures
information only.
E 1925 Specification for Engineering and Design Criteria
1.3 The following safety hazards caveat refers only to the
5
for Rigid Wall Relocatable Structures
test methods described in this specification. This standard does
2.2 Federal Air Regulation (FAR):
not purport to address the safety concerns, if any, associated
6
FAR 25.853 Compartment Interior
with its use. It is the responsibility of the user of the standard
2.3 Military Standards:
to establish appropriate safety and health practices and
MIL-W-6858 Welding Resistance: Aluminum, Magnesium,
determine the applicability of regulatory limitations prior to
Non-Hardening Steels or Alloys, Nickel Alloys, Nickel
use.
Alloys, Heat-Resisting Alloys and Titanium Alloys; Spot
7
2. Referenced Documents and Seam
7
MIL-M-13231 Marking of Electronic Items
2.1 ASTM Standards:
7
MIL-F-14072 Finishes for Ground Electronic Equipment
C 272 Test Method for Water Absorption of Core Materials
2
MIL-DTL-55507 Shelter, Electrical Equipment, (With or
for Structural Sandwich Constructions
7
Without Equipment), Packaging of
C 273 Test Method for Shear in Flatwise Plane of Flat
2
MIL-STD-105 Sampling Procedures and Tables for Inspec-
Sandwich Constructions or Sandwich Cores
7
tion by Attributes
D 1621 Test Method for Compressive Strength of Rigid
3
MIL-STD-202 Test Methods for Electronic and Electrical
Cellular Plastics
7
Component Parts
D 1622 Test Method for Apparent Density of Rigid Cellular
3
MIL-STD-252 Classification of Visual and Mechanical De-
Plastics
fects for Equipment, Electronic, Wired, and Other De-
D 2842 Test Method for Water Absorption of Rigid Cellular
7
4
vices
Plastics
MIL-STD-810 Environmental Engineering Considerations
E 864 Practice for Preparation of Aluminum Alloys to be
7
5
and Laboratory Tests
Adhesively Bonded in Honeycomb Shelter Panels
MIL-STD-1235 Single and Multilevel Continuous Sam-
E 1730 Specification for Rigid Foam for Use in Shelter
7
5
pling Procedures and Tables for Inspection by Attributes
Sandwich Panel Cores
MIL-STD-1595 Qualification of Aircraft, Missile and Aero-
E 1749 Terminology Relating to Rigid Wall Relocatable
7
5
space Fusion Welders
Shelters
2.4 Drawings:
E 1773 Practice for Sealing Rigid Wall Tactical Shelters
8
SC-D-36423 Hold Down Assembly
8
SC-C-36424 Cable Assembly
1
This specification is under the jurisdiction of ASTM Committee E06 on
Performance of Buildings and is the direct responsibility of Subcommittee E06.53
on Materials and Processes for Durable Rigid Wall Relocatable Structures.
6
Current edition approved April 10, 2001. Published May 2001. Originally Available from Flight Standards Service, Federal Aviation Administration, 800
published as E 1975–98. Last previous edition E 1975–98. Independence Ave., SW, Washington, DC 20591.
2 7
Annual Book of ASTM Standards, Vol 15.03. Available from Standardization Documents Order Desk, Bldg. 4 Section D, 700
3
Annual Book of ASTM Standards, Vol 08.01. Robbins Ave., Philadelphia, PA 19111-5094, Attn: NPODS.
4 8
Annual Book of ASTM Standards, Vol 08.02. Available from U.S. Army Natick Research, Development, and Engineering
5
Annual Book of ASTM Standards, Vol 04.11. Center, Attn: SSCNC-WST, Natick, MA 01760-5018.
Copyright © ASTM, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
E 1975
8
SC-C-200154 Keeper 3.1.2 examination—examination consists of simple, gener-
8
ally nondestructive determinations of compliance, without the
SM-D-450462 Panel Assembly, Emergency Exit
8
use of special testing equipment.
SM-C-450466 Air Filter
8
3
...