ASTM F1376-92(2020)
(Guide)Standard Guide for Metallurgical Analysis for Gas Distribution System Components (Withdrawn 2023)
Standard Guide for Metallurgical Analysis for Gas Distribution System Components (Withdrawn 2023)
SIGNIFICANCE AND USE
4.1 This guide defines a procedure for testing components being considered for installation into a high-purity gas distribution system. Application of this guide is expected to yield comparable data among components tested for purposes of qualification for this installation.
4.2 This guide establishes a procedure for determining the elemental composition and metallurgical characteristics of metal used to fabricate components for high purity gas distribution systems in the semiconductor industry. The composition and metallurgy of stainless steel may be expected to affect properties of importance to this application, including surface roughness, incidence of surface defects, passivation, corrosion resistance, and welding.
SCOPE
1.1 This guide covers corrosion resistant metallic alloys of the general class stainless steel, containing chromium, nickel, manganese, and silicon as major alloying additions and possibly molybdenum, that are qualified or specified for the materials of components used in high-purity gas supply systems for the semiconductor industry. This guide is primarily intended for testing to determine conformance to applicable composition and metallurgical specifications as stated in supplier product specifications or customer purchase specifications, or both.
1.2 Elements analyzed and reported in this guide are as follows:
1.2.1 The alloying additions chromium, nickel, and molybdenum (if specified in alloy, as in type 316L),
1.2.2 The minor elements and residuals manganese, silicon, copper, cobalt, and stabilizers such as titanium and columbium (niobium), if present,
1.2.3 Carbon, sulfur and phosphorus,
1.2.4 Nitrogen and oxygen gases,
1.2.5 Any additional minor element additions that may be made as part of the melting and casting practice, such as aluminum and calcium,
1.2.6 Available standard analytical and reporting techniques are described for these elements.
1.3 Metallurgical characteristics to be analyzed and reported are inclusion contents, grain structure, mechanical properties, and intergranular corrosion susceptibility.
1.4 Limitations:
1.4.1 This guide is limited to corrosion resistant metal alloys of the general class stated in the Scope.
1.4.2 The test methods cited in this guide are not intended to preclude the use of other generally accepted techniques of demonstrated equivalent or superior precision and bias.
1.4.3 Inclusion of testing and analysis procedures for any given element or metallurgical characteristic in this guide is not to be construed as being a requirement for incorporation of that element or metallurgical characteristic into any specifications.
1.5 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are for information only.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
WITHDRAWN RATIONALE
This guide covers corrosion resistant metallic alloys of the general class stainless steel, containing chromium, nickel, manganese, and silicon as major alloying additions and possibly molybdenum, that are qualified or specified for the materials of components used in high-purity gas supply systems for the semiconductor industry. This guide is primarily intended for testing to determine conformance to applicable composition and metallurgical specifications as stated in supplier product sp...
General Information
Relations
Buy Standard
Standards Content (Sample)
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: F1376 − 92 (Reapproved 2020)
Standard Guide for
Metallurgical Analysis for Gas Distribution System
1
Components
This standard is issued under the fixed designation F1376; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
INTRODUCTION
Semiconductor clean rooms are serviced by high-purity gas distribution systems. This guide
presents a procedure that may be applied for the evaluation of one or more components considered for
use in such systems.
1. Scope 1.4.2 Thetestmethodscitedinthisguidearenotintendedto
preclude the use of other generally accepted techniques of
1.1 This guide covers corrosion resistant metallic alloys of
demonstrated equivalent or superior precision and bias.
the general class stainless steel, containing chromium, nickel,
1.4.3 Inclusion of testing and analysis procedures for any
manganese, and silicon as major alloying additions and possi-
givenelementormetallurgicalcharacteristicinthisguideisnot
bly molybdenum, that are qualified or specified for the mate-
to be construed as being a requirement for incorporation of that
rials of components used in high-purity gas supply systems for
element or metallurgical characteristic into any specifications.
the semiconductor industry. This guide is primarily intended
fortestingtodetermineconformancetoapplicablecomposition 1.5 The values stated in SI units are to be regarded as the
and metallurgical specifications as stated in supplier product standard. The inch-pound units given in parentheses are for
specifications or customer purchase specifications, or both. information only.
1.6 This standard does not purport to address all of the
1.2 Elements analyzed and reported in this guide are as
safety concerns, if any, associated with its use. It is the
follows:
responsibility of the user of this standard to establish appro-
1.2.1 The alloying additions chromium, nickel, and molyb-
priate safety, health, and environmental practices and deter-
denum (if specified in alloy, as in type 316L),
mine the applicability of regulatory limitations prior to use.
1.2.2 The minor elements and residuals manganese, silicon,
1.7 This international standard was developed in accor-
copper, cobalt, and stabilizers such as titanium and columbium
dance with internationally recognized principles on standard-
(niobium), if present,
ization established in the Decision on Principles for the
1.2.3 Carbon, sulfur and phosphorus,
Development of International Standards, Guides and Recom-
1.2.4 Nitrogen and oxygen gases,
mendations issued by the World Trade Organization Technical
1.2.5 Any additional minor element additions that may be
Barriers to Trade (TBT) Committee.
made as part of the melting and casting practice, such as
aluminum and calcium,
2. Referenced Documents
1.2.6 Available standard analytical and reporting techniques
2
are described for these elements.
2.1 ASTM Standards:
A262 Practices for Detecting Susceptibility to Intergranular
1.3 Metallurgicalcharacteristicstobeanalyzedandreported
Attack in Austenitic Stainless Steels
are inclusion contents, grain structure, mechanical properties,
A370 Test Methods and Definitions for Mechanical Testing
and intergranular corrosion susceptibility.
of Steel Products
1.4 Limitations:
A479/A479M Specification for Stainless Steel Bars and
1.4.1 This guide is limited to corrosion resistant metal
Shapes for Use in Boilers and Other Pressure Vessels
alloys of the general class stated in the Scope.
A484/A484M Specification for General Requirements for
1
This guide is under the jurisdiction of ASTM Committee F01 on Electronics
2
and is the direct responsibility of Subcommittee F01.10 on Contamination Control. For referenced ASTM standards, visit the ASTM website, www.astm.org, or
Current edition published April 15, 2020. Published May 2020. Originally contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
approvedin1992.Lastpreviouseditionapprovedin2012asF1376–92(2012).DOI: Standards volume information, refer to the standard’s Document Summary page on
10.1520/F1376-92R20. the ASTM website.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
F1376 − 92 (2020)
2
Stainless Steel Bars, Billets, and Forgings and metallurgy of stainless steel may be expected to affect
A751 Test Methods, Practices, and Terminology for Chemi- properties of imp
...
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: F1376 − 92 (Reapproved 2020)
Standard Guide for
Metallurgical Analysis for Gas Distribution System
1
Components
This standard is issued under the fixed designation F1376; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
INTRODUCTION
Semiconductor clean rooms are serviced by high-purity gas distribution systems. This guide
presents a procedure that may be applied for the evaluation of one or more components considered for
use in such systems.
1. Scope 1.4.2 The test methods cited in this guide are not intended to
preclude the use of other generally accepted techniques of
1.1 This guide covers corrosion resistant metallic alloys of
demonstrated equivalent or superior precision and bias.
the general class stainless steel, containing chromium, nickel,
1.4.3 Inclusion of testing and analysis procedures for any
manganese, and silicon as major alloying additions and possi-
given element or metallurgical characteristic in this guide is not
bly molybdenum, that are qualified or specified for the mate-
to be construed as being a requirement for incorporation of that
rials of components used in high-purity gas supply systems for
element or metallurgical characteristic into any specifications.
the semiconductor industry. This guide is primarily intended
for testing to determine conformance to applicable composition 1.5 The values stated in SI units are to be regarded as the
and metallurgical specifications as stated in supplier product standard. The inch-pound units given in parentheses are for
specifications or customer purchase specifications, or both. information only.
1.6 This standard does not purport to address all of the
1.2 Elements analyzed and reported in this guide are as
safety concerns, if any, associated with its use. It is the
follows:
responsibility of the user of this standard to establish appro-
1.2.1 The alloying additions chromium, nickel, and molyb-
priate safety, health, and environmental practices and deter-
denum (if specified in alloy, as in type 316L),
mine the applicability of regulatory limitations prior to use.
1.2.2 The minor elements and residuals manganese, silicon,
1.7 This international standard was developed in accor-
copper, cobalt, and stabilizers such as titanium and columbium
dance with internationally recognized principles on standard-
(niobium), if present,
ization established in the Decision on Principles for the
1.2.3 Carbon, sulfur and phosphorus,
Development of International Standards, Guides and Recom-
1.2.4 Nitrogen and oxygen gases,
mendations issued by the World Trade Organization Technical
1.2.5 Any additional minor element additions that may be
Barriers to Trade (TBT) Committee.
made as part of the melting and casting practice, such as
aluminum and calcium,
2. Referenced Documents
1.2.6 Available standard analytical and reporting techniques
2
are described for these elements.
2.1 ASTM Standards:
A262 Practices for Detecting Susceptibility to Intergranular
1.3 Metallurgical characteristics to be analyzed and reported
Attack in Austenitic Stainless Steels
are inclusion contents, grain structure, mechanical properties,
A370 Test Methods and Definitions for Mechanical Testing
and intergranular corrosion susceptibility.
of Steel Products
1.4 Limitations:
A479/A479M Specification for Stainless Steel Bars and
1.4.1 This guide is limited to corrosion resistant metal
Shapes for Use in Boilers and Other Pressure Vessels
alloys of the general class stated in the Scope.
A484/A484M Specification for General Requirements for
1
This guide is under the jurisdiction of ASTM Committee F01 on Electronics
2
and is the direct responsibility of Subcommittee F01.10 on Contamination Control. For referenced ASTM standards, visit the ASTM website, www.astm.org, or
Current edition published April 15, 2020. Published May 2020. Originally contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
approved in 1992. Last previous edition approved in 2012 as F1376–92(2012). DOI: Standards volume information, refer to the standard’s Document Summary page on
10.1520/F1376-92R20. the ASTM website.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
F1376 − 92 (2020)
2
Stainless Steel Bars, Billets, and Forgings and metallurgy of stainless steel may be expected to affect
A751 Test Methods, Practices, and Terminology for Chemi- properties of importance to this application, including surface
cal Analysis of Steel Products roughness, incidence of s
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.