ASTM D5055-02

Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists

SCOPE
1.1 General—This specification gives procedures for establishing, monitoring, and reevaluating structural capacities of prefabricated wood I-joists. Capacities considered are shear, moment, and stiffness. Procedures for establishing common details are given and certain design considerations specific to wood I-joists are itemized.
1.2 Contents of the Standard—An index and brief description of the main features of this specification are given in .
1.3 Development of the Standard—The development and intent of this specification is discussed in .
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. A specific precautionary statement is given in 6.1.1.5.

General Information

• Status: Historical
• Publication Date: 09-Oct-2000
• ICS: 79.080 - Semi-manufactures of timber
• Technical Committee: D07 - Wood
• Drafting Committee: D07.02 - Lumber and Engineered Wood Products

Relations

• Replaces: ASTM D5055-00a - Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
• Effective Date: 10-Oct-2000
• Replaced By: ASTM D5055-03 - Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
• Effective Date: 01-Oct-2003
• Referred By: ASTM D6555-17 - Standard Guide for Evaluating System Effects in Repetitive-Member Wood Assemblies
• Effective Date: 10-Oct-2000
• Referred By: ASTM D2559-12a(2018) - Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions
• Effective Date: 10-Oct-2000
• Referred By: ASTM D7147-21 - Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers
• Effective Date: 10-Oct-2000
• Referred By: ASTM D5457-23 - Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design
• Effective Date: 10-Oct-2000
• Referred By: ASTM D5456-21e1 - Standard Specification for Evaluation of Structural Composite Lumber Products
• Effective Date: 10-Oct-2000
• Referred By: ASTM D7290-06(2022) - Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications
• Effective Date: 10-Oct-2000
• Referred By: ASTM D2915-17(2022) - Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products
• Effective Date: 10-Oct-2000
• Referred By: ASTM D8391-22e1 - Standard Specification for Demonstrating Equivalent Fire Performance for Wood-Based Floor Framing Members to Unprotected 2 by 10 Dimension Lumber or Equal-Sized Structural Composite Lumber
• Effective Date: 10-Oct-2000
• Referred By: ASTM D7672-19 - Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies
• Effective Date: 10-Oct-2000

Standards Content (Sample)

NOTICE: This standard has either been superceded and replaced by a new version or discontinued.
Contact ASTM International (www.astm.org) for the latest information.
Designation: D 5055 – 02
Standard Specification for
Establishing and Monitoring Structural Capacities of
1
Prefabricated Wood I-Joists
This standard is issued under the fixed designation D 5055; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope tance of Wood-Based Materials and Structural Connec-
2
tions for Load and Resistance Factor Design
1.1 General—This specification gives procedures for estab-
4
E 4 Practices for Force Verification of Testing Machines
lishing, monitoring, and reevaluating structural capacities of
E 529 Guide for Conducting Flexural Tests on Beams and
prefabricated wood I-joists. Capacities considered are shear,
5
Girders for Building Construction
moment, and stiffness. Procedures for establishing common
E 699 Criteria for Evaluation of Agencies Involved in
details are given and certain design considerations specific to
Testing, Quality Assurance, and Evaluating Building Com-
wood I-joists are itemized.
ponents in Accordance with Test Methods Promulgated by
1.2 Contents of the Standard—An index and brief descrip-
6
ASTM Committee E06
tion of the main features of this specification are given in
IEEE/ASTM-S1–10 Standard for Use of the International
X1.1.1.
7
System of Units (SI): The Modern Metric System
1.3 Development of the Standard—The development and
2.2 Other Standards:
intent of this specification is discussed in Appendix X1.
U.S. Product Standard PS-1 Construction and Industrial
1.4 This standard does not purport to address all of the
8
Plywood
safety concerns, if any, associated with its use. It is the
U.S. Product Standard PS-2 Performance Standard for
responsibility of the user of this standard to establish appro-
8
Wood-Based Structural-Use Panels
priate safety and health practices and determine the applica-
CSA O112.7 Resorcinol and Phenol-Resorcinal Resin Ad-
bility of regulatory limitations prior to use. A specific precau-
9
hesives
tionary statement is given in 6.1.1.5.
9
CSA O151 Canadian Softwood Plywood
9
2. Referenced Documents
CSA O325.0 Construction Sheathing
9
CSA O452 Design Rated OSB
2.1 ASTM Standards:
Lumber Grading Rules Approved by American Lumber
D 198 Test Methods of Static Tests of Lumber in Structural
2
Standards Committee (ALSC) or Canadian Lumber Stan-
Sizes
10
dards Accreditation Board (CLSAB)
D 245 Practice for Establishing Structural Grades and Re-
2
lated Allowable Properties for Visually Graded Lumber
3. Terminology
D 1990 Practice for Establishing Allowable Properties for
3.1 Definition:
Visually-Graded Dimension Lumber from In-Grade Tests
2
3.1.1 prefabricated wood I-joist—a structural member
of Full-Size Specimens
manufactured using sawn or structural composite lumber
D 2559 Specification for Adhesives for Structural Lami-
flanges and structural panel webs, bonded together with exte-
nated Wood Products for Use Under Exterior (Wet Use)
3 rior exposure adhesives, forming an “I” cross-sectional shape.
Exposure Conditions
These members are primarily used as joists in floor and roof
D 2915 Practice for Evaluating Allowable Properties for
2 construction.
Grades of Structural Lumber
D 4761 Test Methods for Mechanical Properties of Lumber
4
2
Annual Book of ASTM Standards, Vol 03.01.
and Wood-Base Structural Material
5
Annual Book of ASTM Standards, Vol 04.11.
D 5457 Specification for Computing the Reference Resis-
6
Annual Book of ASTM Standards, Vol 14.02.
7
Available from the ASTM International website; www. astm.org.
8
Available from APA The Engineered Wood Association, P.O. Box 11700,
1
This specification is under the jurisdiction of ASTM Committee D07 on Wood Tacoma, WA 98411and PFS Research Foundation, 2402 Daniels Street, Madison,
and is the direct responsibility of Subcommittee D07.02 on Lumber and Engineered WI 53718.
9
Wood Products. Available from Canadian Standards Association, 178 Rexdale Blvd., Etobicoke,
Current edition approved June 10, 2002. Published August 2002. Originally Ontario, Canada M9W 1R3.
10
published as D 5055 – 90. Last previous edition D 5055 – 00a. Available from American Lumber Standard Committee (ALSC), P.O. Box 210,
2
Annual Book of ASTM Standards, Vol 04.10. Germantown, MD 20874. Canadian Lumber Standards Accreditation Board
3
Annual Book of ASTM Standards, Vol 15.06. (CLSAB), 1055 W. Hastings St., Vancouver, BC, Canada V6E 2E9.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
NOTICE: This standard has either been superceded and replaced by a new version or discontinued.
Contact A
...