Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures<rangeref></rangeref >

ABSTRACT
This specification covers the design, testing, manufacture, selection, and installation of fabricated metal access hatches for utility, water, and wastewater structures including utility vaults, drainage structures, valve vaults, meter vaults, wet wells, pump enclosures, utility trenches, piping trenches, and drainage trenches. It applies to various configurations of access hatches constructed of fabricated metal of various materials and grades for various loading conditions, traffic speeds, or both. It provides engineering design and testing criteria for access hatches to be located in various areas subjected to various loading conditions, traffic speed, frequency, or combinations thereof. It also includes production loading criteria to allow the access hatches to be tested in order to verify the load capacity of the manufactured hatches, as well as hatch loading selection guidelines to allow selection of the proper hatch design loading for the conditions of the actual area of placement. This specification also details requirements with respect to the acceptability of the access hatches, material certification and quality control, repairs, inspection, marking, optional features as part of the access hatch design, and submittal drawings.
SCOPE
1.1 This specification covers the design, testing, manufacture, selection, and installation of fabricated metal access hatches for utility, water, and wastewater structures including utility vaults, drainage structures, valve vaults, meter vaults, wet wells, pump enclosures, utility trenches, piping trenches, and drainage trenches.  
1.2 This specification is applicable to various configurations of access hatches constructed of fabricated metal of various materials and grades for various loading conditions, traffic speeds, or both.  
1.3 Engineering design and testing criteria are provided for access hatches to be located in various areas subjected to various loading conditions, traffic speed, frequency, or combinations thereof.  
1.4 Proof loading criteria is provided to allow the access hatches to be designed by engineering calculation and/or by ultimate strength load testing.  
1.5 Production loading criteria is provided to allow the access hatches to be tested to verify the load capacity of the manufactured hatches.  
1.6 Hatch loading selection guidelines are included to allow selection of the proper hatch design loading for the conditions of the actual area of placement.  
1.7 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered the standard.  
1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Information

Status
Historical
Publication Date
14-Dec-2014
Drafting Committee
Current Stage
Ref Project

Relations

Buy Standard

Technical specification
ASTM C1802-14e1 - Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures<rangeref></rangeref >
English language
25 pages
sale 15% off
Preview
sale 15% off
Preview
Technical specification
REDLINE ASTM C1802-14e1 - Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures<rangeref></rangeref >
English language
25 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
´1
Designation:C1802 −14
Standard Specification for
Design, Testing, Manufacture, Selection, and Installation of
Fabricated Metal Access Hatches for Utility, Water, and
1,2
Wastewater Structures
This standard is issued under the fixed designation C1802; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1
ε NOTE—Editorial corrections were made throughout in April 2015.
1. Scope conversions to SI units that are provided for information only
and are not considered the standard.
1.1 This specification covers the design, testing,
1.8 This standard does not purport to address all of the
manufacture, selection, and installation of fabricated metal
safety concerns, if any, associated with its use. It is the
access hatches for utility, water, and wastewater structures
responsibility of the user of this standard to establish appro-
includingutilityvaults,drainagestructures,valvevaults,meter
priate safety and health practices and determine the applica-
vaults, wet wells, pump enclosures, utility trenches, piping
bility of regulatory limitations prior to use.
trenches, and drainage trenches.
1.2 Thisspecificationisapplicabletovariousconfigurations
2. Referenced Documents
of access hatches constructed of fabricated metal of various
3
2.1 ASTM Standards:
materials and grades for various loading conditions, traffic
A36/A36MSpecification for Carbon Structural Steel
speeds, or both.
A53/A53MSpecification for Pipe, Steel, Black and Hot-
1.3 Engineering design and testing criteria are provided for
Dipped, Zinc-Coated, Welded and Seamless
access hatches to be located in various areas subjected to
A123/A123MSpecification for Zinc (Hot-Dip Galvanized)
various loading conditions, traffic speed, frequency, or combi-
Coatings on Iron and Steel Products
nations thereof.
A176Specification for Stainless and Heat-Resisting Chro-
4
1.4 Proof loading criteria is provided to allow the access mium Steel Plate, Sheet, and Strip (Withdrawn 2015)
hatches to be designed by engineering calculation and/or by A240/A240MSpecification for Chromium and Chromium-
ultimate strength load testing. Nickel Stainless Steel Plate, Sheet, and Strip for Pressure
Vessels and for General Applications
1.5 Production loading criteria is provided to allow the
A242/A242MSpecification for High-Strength Low-Alloy
access hatches to be tested to verify the load capacity of the
Structural Steel
manufactured hatches.
A276Specification for Stainless Steel Bars and Shapes
1.6 Hatchloadingselectionguidelinesareincludedtoallow
A325Specification for Structural Bolts, Steel, Heat Treated,
selection of the proper hatch design loading for the conditions
120/105 ksi Minimum Tensile Strength
of the actual area of placement.
A490Specification for Structural Bolts, Alloy Steel, Heat
Treated, 150 ksi Minimum Tensile Strength
1.7 The values stated in inch-pound units are to be regarded
A500/A500MSpecification for Cold-Formed Welded and
as standard. The values given in parentheses are mathematical
Seamless Carbon Steel Structural Tubing in Rounds and
Shapes
1
ThisspecificationisunderthejurisdictionofASTMCommitteeC27onPrecast
A514/A514M Specification for High-Yield-Strength,
Concrete Products and is the direct responsibility of Subcommittee C27.10 on
Quenched and Tempered Alloy Steel Plate, Suitable for
Utility Structures.
Welding
CurrenteditionapprovedDec.15,2014.PublishedJanuary2015.DOI:10.1520/
C1802-14.
2
This specification is primarily a design, testing, manufacturing, selection,
3
purchasing, and installation specification. The successful performance of this For referenced ASTM standards, visit the ASTM website, www.astm.org, or
product depends upon the proper selection of the loading criteria based on the contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
product’s actual use and the products proper installation. The purchaser of the Standards volume information, refer to the standard’s Document Summary page on
fabricated metal access hatches specified herein is cautioned that proper correlation the ASTM website.
4
of the loading conditions, proper installation for the hatch specified, and provision The last approved version of this historical standard is referenced on
for inspection of the installation at the construction site, are required. www.astm.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
´1
C1802−14
A529/A529M Specification for High-Strength Carbon- E4Practices for Force Verification of Testing Machines
Manganese Steel of Structural
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
´1
Designation: C1802 − 14 C1802 − 14
Standard Specification for
Design, Testing, Manufacture, Selection, and Installation of
Fabricated Metal Access Hatches for Utility, Water, and
1,2
Wastewater Structures
This standard is issued under the fixed designation C1802; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1
ε NOTE—Editorial corrections were made throughout in April 2015.
1. Scope
1.1 This specification covers the design, testing, manufacture, selection, and installation of fabricated metal access hatches for
utility, water, and wastewater structures including utility vaults, drainage structures, valve vaults, meter vaults, wet wells, pump
enclosures, utility trenches, piping trenches, and drainage trenches.
1.2 This specification is applicable to various configurations of access hatches constructed of fabricated metal of various
materials and grades for various loading conditions, traffic speeds, or both.
1.3 Engineering design and testing criteria are provided for access hatches to be located in various areas subjected to various
loading conditions, traffic speed, frequency, or combinations thereof.
1.4 Proof loading criteria is provided to allow the access hatches to be designed by engineering calculation and/or by ultimate
strength load testing.
1.5 Production loading criteria is provided to allow the access hatches to be tested to verify the load capacity of the
manufactured hatches.
1.6 Hatch loading selection guidelines are included to allow selection of the proper hatch design loading for the conditions of
the actual area of placement.
1.7 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical
conversions to SI units that are provided for information only and are not considered the standard.
1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory
limitations prior to use.
2. Referenced Documents
3
2.1 ASTM Standards:
A36/A36M Specification for Carbon Structural Steel
A53/A53M Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
A123/A123M Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
4
A176 Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip (Withdrawn 2015)
A240/A240M Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and
for General Applications
1
This specification is under the jurisdiction of ASTM Committee C27 on Precast Concrete Products and is the direct responsibility of Subcommittee C27.10 on Utility
Structures.
Current edition approved Dec. 15, 2014. Published January 2015. DOI: 10.1520/C1802-14.
2
This specification is primarily a design, testing, manufacturing, selection, purchasing, and installation specification. The successful performance of this product depends
upon the proper selection of the loading criteria based on the product’s actual use and the products proper installation. The purchaser of the fabricated metal access hatches
specified herein is cautioned that proper correlation of the loading conditions, proper installation for the hatch specified, and provision for inspection of the installation at
the construction site, are required.
3
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
4
The last approved version of this historical standard is referenced on www.astm.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
´1
C1802 − 14
A242/A242M Specification for High-Strength Low-Alloy Structural Steel
A276 Specification for Stainless Steel Bars and Shapes
A325 Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
A490 Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
A500/A500M Specifica
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.