ASTM D6227-14
(Specification)Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component
Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component
ABSTRACT
This specification covers Grade 82 unleaded aviation gasoline for use only in engines and associated aircraft that are specifically approved by the engine and aircraft manufacturers, and certified by the National Certifying Agencies to use this fuel. Aviation gasoline shall consist of blends of refined hydrocarbons derived from crude petroleum, natural gasoline or blends thereof, with specific aliphatic ethers, synthetic hydrocarbons, or aromatic hydrocarbons, and when applicable, methyl tertiarybutyl ether (MTBE). They may also contain antioxidants (oxidation inhibitors), metal deactivators, corrosion inhibitors, and fuel system icing inhibitors. The gasoline shall be tested and conform accordingly to the following property requirements: lean mixture knock value and motor method octane number; color; blue and red dye content; distillation temperature at % evaporated, end point, and residue content; distillation recovery; distillation loss; net heat of combustion; freezing point; vapor pressure; lead content; copper strip corrosion; sulfur content; potential gum; and alcohols and ether content (aliphatic ethers, methanol, and ethanol).
SCOPE
1.1 This specification covers Grades UL82 and UL87 unleaded aviation gasolines, which are defined by this specification and are only for use in engines and associated aircraft that are specifically approved by the engine and aircraft manufacturers, and certified by the National Certifying Agencies to use these fuels. Components containing hetro-atoms (oxygenates) may be present within the limits specified.
1.2 A fuel may be certified to meet this specification by a producer as Grade UL82 or UL87 aviation gasoline only if blended from component(s) approved for use in these grades of aviation gasoline by the refiner(s) of such components, because only the refiner(s) can attest to the component source and processing, absence of contamination, and the additives used and their concentrations. Consequently, reclassifying of any other product to Grade UL82 or Grade UL87 aviation gasoline does not meet this specification.
1.3 Appendix X1 contains an explanation for the rationale of the specification. Appendix X2 details the reasons for the individual specification requirements.
1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are provided for information only.
General Information
Relations
Buy Standard
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:D6227 −14 An American National Standard
Standard Specification for
Unleaded Aviation Gasoline Containing a Non-hydrocarbon
1
Component
This standard is issued under the fixed designation D6227; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope* Fuels Below 100 Octane Number by the Motor Method;
3
Replaced by D 2700 (Withdrawn 1969)
1.1 This specification covers Grades UL82 and UL87 un-
D381 Test Method for Gum Content in Fuels by Jet Evapo-
leaded aviation gasolines, which are defined by this specifica-
ration
tion and are only for use in engines and associated aircraft that
D873 Test Method for Oxidation Stability of Aviation Fuels
are specifically approved by the engine and aircraft
(Potential Residue Method)
manufacturers, and certified by the National Certifying Agen-
D909 Test Method for Supercharge Rating of Spark-Ignition
cies to use these fuels. Components containing hetro-atoms
Aviation Gasoline
(oxygenates) may be present within the limits specified.
D910 Specification for Aviation Gasolines
1.2 A fuel may be certified to meet this specification by a
D1266 Test Method for Sulfur in Petroleum Products (Lamp
producer as Grade UL82 or UL87 aviation gasoline only if
Method)
blendedfromcomponent(s)approvedforuseinthesegradesof
D1298 Test Method for Density, Relative Density, or API
aviationgasolinebytherefiner(s)ofsuchcomponents,because
Gravity of Crude Petroleum and Liquid Petroleum Prod-
only the refiner(s) can attest to the component source and
ucts by Hydrometer Method
processing, absence of contamination, and the additives used
D2386 Test Method for Freezing Point of Aviation Fuels
and their concentrations. Consequently, reclassifying of any
D2392 Test Method for Color of Dyed Aviation Gasolines
other product to Grade UL82 or Grade UL87 aviation gasoline
D2622 Test Method for Sulfur in Petroleum Products by
does not meet this specification.
Wavelength Dispersive X-ray Fluorescence Spectrometry
1.3 Appendix X1 contains an explanation for the rationale D2699 Test Method for Research Octane Number of Spark-
Ignition Engine Fuel
of the specification. Appendix X2 details the reasons for the
individual specification requirements. D2700 Test Method for Motor Octane Number of Spark-
Ignition Engine Fuel
1.4 The values stated in SI units are to be regarded as the
D3120 Test Method for Trace Quantities of Sulfur in Light
standard. The values given in parentheses are provided for
Liquid Petroleum Hydrocarbons by Oxidative Microcou-
information only.
lometry
D3231 Test Method for Phosphorus in Gasoline
2. Referenced Documents
D3237 TestMethodforLeadinGasolinebyAtomicAbsorp-
2
2.1 ASTM Standards:
tion Spectroscopy
D86 Test Method for Distillation of Petroleum Products at
D3338 Test Method for Estimation of Net Heat of Combus-
Atmospheric Pressure
tion of Aviation Fuels
D130 Test Method for Corrosiveness to Copper from Petro-
D4052 Test Method for Density, Relative Density, and API
leum Products by Copper Strip Test
Gravity of Liquids by Digital Density Meter
D357 Method of Test for Knock Characteristics of Motor
D4057 Practice for Manual Sampling of Petroleum and
Petroleum Products
1 D4171 Specification for Fuel System Icing Inhibitors
This specification is under the jurisdiction of ASTM Committee D02 on
Petroleum Products, Liquid Fuels, and Lubricants and is the direct responsibility of
D4294 Test Method for Sulfur in Petroleum and Petroleum
Subcommittee D02.J0.02 on J2 Spark and Compression Ignition Aviation Engine
Products by Energy Dispersive X-ray Fluorescence Spec-
Fuels.
trometry
Current edition approved May 1, 2014. Published May 2014. Originally
D4529 Test Method for Estimation of Net Heat of Combus-
approved in 1998. Last previous edition approved in 2012 as D6227 – 12. DOI:
10.1520/D6227-14.
tion of Aviation Fuels
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
3
Standards volume information, refer to the standard’s Document Summary page on The last approved version of this historical standard is referenced on
the ASTM website. www.astm.org.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
D6227−14
D4809 Test Method for Heat of Combustion of Liquid 5. General
Hydrocarbon Fuels by Bomb Calorimeter (Precision
5.1 Thisspecification,unlessotherwiseprovided,prescribes
Method)
the required properties of unl
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: D6227 − 12 D6227 − 14 An American National Standard
Standard Specification for
Unleaded Aviation Gasoline Containing a Non-hydrocarbon
1
Component
This standard is issued under the fixed designation D6227; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope*
1.1 This specification covers Grades UL82 and UL87 unleaded aviation gasolines, which are defined by this specification and
are only for use in engines and associated aircraft that are specifically approved by the engine and aircraft manufacturers, and
certified by the National Certifying Agencies to use these fuels. Components containing hetro-atoms (oxygenates) may be present
within the limits specified.
1.2 A fuel may be certified to meet this specification by a producer as Grade UL82 or UL87 aviation gasoline only if blended
from component(s) approved for use in these grades of aviation gasoline by the refiner(s) of such components, because only the
refiner(s) can attest to the component source and processing, absence of contamination, and the additives used and their
concentrations. Consequently, reclassifying of any other product to Grade UL82 or Grade UL87 aviation gasoline does not meet
this specification.
1.3 Appendix X1 contains an explanation for the rationale of the specification. Appendix X2 details the reasons for the
individual specification requirements.
1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are provided for information
only.
2. Referenced Documents
2
2.1 ASTM Standards:
D86 Test Method for Distillation of Petroleum Products at Atmospheric Pressure
D130 Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
D357 Method of Test for Knock Characteristics of Motor Fuels Below 100 Octane Number by the Motor Method; Replaced by
3
D 2700 (Withdrawn 1969)
D381 Test Method for Gum Content in Fuels by Jet Evaporation
D873 Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)
D909 Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline
D910 Specification for Aviation Gasolines
D1266 Test Method for Sulfur in Petroleum Products (Lamp Method)
D1298 Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by
Hydrometer Method
D2386 Test Method for Freezing Point of Aviation Fuels
D2392 Test Method for Color of Dyed Aviation Gasolines
D2622 Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
D2699 Test Method for Research Octane Number of Spark-Ignition Engine Fuel
D2700 Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
D3120 Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
D3231 Test Method for Phosphorus in Gasoline
1
This specification is under the jurisdiction of ASTM Committee D02 on Petroleum Products Products, Liquid Fuels, and Lubricants and is the direct responsibility of
Subcommittee D02.J0.02 on Aviation GasolineJ2 Spark and Compression Ignition Aviation Engine Fuels.
Current edition approved April 15, 2012May 1, 2014. Published May 2012May 2014. Originally approved in 1998. Last previous edition approved in 20102012 as
D6227D6227 – 12.–10. DOI: 10.1520/D6227-12.10.1520/D6227-14.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
3
The last approved version of this historical standard is referenced on www.astm.org.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
D6227 − 14
D3237 Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
D3338 Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
D4052 Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
D4057 Practice for Manual Sampling of Petroleum and Petroleum Products
D4171 Specification for Fuel System Icing Inhibitors
D4294 Test Method for Sulfu
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.