iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM E1823-12e

(Terminology)

Standard Terminology Relating to Fatigue and Fracture Testing

Standard Terminology Relating to Fatigue and Fracture Testing

SCOPE
1.1 This terminology contains definitions, definitions of terms specific to certain standards, symbols, and abbreviations approved for use in standards on fatigue and fracture testing. The definitions are preceded by two lists. The first is an alphabetical listing of symbols used. (Greek symbols are listed in accordance with their spelling in English.) The second is an alphabetical listing of relevant abbreviations.  
1.2 This terminology includes Annex A1 on Units and Annex A2 on Designation Codes for Specimen Configuration, Applied Loading, and Crack or Notch Orientation.

General Information

Status
Historical
Publication Date
14-Dec-2012
ICS
01.040.19 - Testing (Vocabularies)
19.060 - Mechanical testing
Technical Committee
E08 - Fatigue and Fracture
Drafting Committee
E08.02 - Terminology
Current Stage
Ref Project

Relations

Replaces
ASTM E1823-12d - Standard Terminology Relating to Fatigue and Fracture Testing
Effective Date
15-Dec-2012
Referred By
ASTM E1221-12A(2018)e1 - Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, <emph type="bdit">K<inf>Ia</inf></emph>, of Ferritic Steels
Effective Date
15-Dec-2012
Referred By
ASTM E1457-19e1 - Standard Test Method for Measurement of Creep Crack Growth Times in Metals
Effective Date
15-Dec-2012
Referred By
ASTM E468/E468M-23 - Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials
Effective Date
15-Dec-2012
Referred By
ASTM E399-23 - Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
Effective Date
15-Dec-2012
Referred By
ASTM C1361-10(2019) - Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
Effective Date
15-Dec-2012
Referred By
ASTM E1942-98(2018)e1 - Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing
Effective Date
15-Dec-2012
Referred By
ASTM B593-21 - Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
Effective Date
15-Dec-2012
Referred By
ASTM E647-23a - Standard Test Method for Measurement of Fatigue Crack Growth Rates
Effective Date
15-Dec-2012
Referred By
ASTM F519-18 - Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
Effective Date
15-Dec-2012
Referred By
ASTM E1922/E1922M-22 - Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
Effective Date
15-Dec-2012
Referred By
ASTM C1834-16 - Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Elevated Temperatures
Effective Date
15-Dec-2012
Referred By
ASTM F3140-23 - Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Unicondylar Knee Joint Replacements
Effective Date
15-Dec-2012
Referred By
ASTM F2077-22 - Standard Test Methods for Intervertebral Body Fusion Devices
Effective Date
15-Dec-2012
Referred By
ASTM E2948-22 - Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
Effective Date
15-Dec-2012

Buy Standard

ASTM E1823-12e - Standard Terminology Relating to Fatigue and Fracture TestingASTM E1823-12e - Standard Terminology Relating to Fatigue and Fracture Testing
PreviousNext
Standard
ASTM E1823-12e - Standard Terminology Relating to Fatigue and Fracture Testing
English language
25 pages
sale 15% off
Preview
sale 15% off
Preview
REDLINE ASTM E1823-12e - Standard Terminology Relating to Fatigue and Fracture TestingREDLINE ASTM E1823-12e - Standard Terminology Relating to Fatigue and Fracture Testing
PreviousNext
Standard
REDLINE ASTM E1823-12e - Standard Terminology Relating to Fatigue and Fracture Testing
English language
25 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: E1823 − 12e
StandardTerminology
1
Relating to Fatigue and Fracture Testing
This standard is issued under the fixed designation E1823; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope E561Test Method forK-R Curve Determination
E602Test Method for Sharp-Notch Tension Testing with
1.1 This terminology contains definitions, definitions of
3
Cylindrical Specimens (Withdrawn 2010)
terms specific to certain standards, symbols, and abbreviations
E604Test Method for Dynamic Tear Testing of Metallic
approved for use in standards on fatigue and fracture testing.
Materials
The definitions are preceded by two lists. The first is an
E606Practice for Strain-Controlled Fatigue Testing
alphabetical listing of symbols used. (Greek symbols are listed
E647Test Method for Measurement of Fatigue Crack
in accordance with their spelling in English.) The second is an
Growth Rates
alphabetical listing of relevant abbreviations.
E739PracticeforStatisticalAnalysisofLinearorLinearized
1.2 This terminology includes Annex A1 on Units and
Stress-Life (S-N) and Strain-Life (ε-N) Fatigue Data
AnnexA2 on Designation Codes for Specimen Configuration,
E740Practice for Fracture Testing with Surface-Crack Ten-
Applied Loading, and Crack or Notch Orientation.
sion Specimens
E813TestMethodforJIc,AMeasureofFractureToughness
2. Referenced Documents
E992Practice for Determination of Fracture Toughness of
2
2.1 ASTM Standards:
Steels Using Equivalent Energy Methodology
E6Terminology Relating to Methods of MechanicalTesting
E1049Practices for Cycle Counting in Fatigue Analysis
E23Test Methods for Notched Bar Impact Testing of Me-
E1152Test Method for Determining-J-R-Curves
tallic Materials
E1221Test Method for Determining Plane-Strain Crack-
E28Test Methods for Softening Point of Resins Derived
Arrest Fracture Toughness, K , of Ferritic Steels
Ia
from Naval Stores by Ring-and-Ball Apparatus
E1290Test Method for Crack-Tip Opening Displacement
E208Test Method for Conducting Drop-Weight Test to
(CTOD) Fracture Toughness Measurement (Withdrawn
Determine Nil-Ductility Transition Temperature of Fer-
3
2013)
ritic Steels
E1304Test Method for Plane-Strain (Chevron-Notch) Frac-
E338Test Method of Sharp-Notch Tension Testing of High-
3
ture Toughness of Metallic Materials
Strength Sheet Materials (Withdrawn 2010)
E1450Test Method for Tension Testing of StructuralAlloys
E399Test Method for Linear-Elastic Plane-Strain Fracture
Toughness K of Metallic Materials in Liquid Helium
Ic
E436Test Method for Drop-Weight Tear Tests of Ferritic E1457 Test Method for Measurement of Creep Crack
Steels
Growth Times in Metals
E467Practice for Verification of Constant Amplitude Dy- E1681Test Method for DeterminingThreshold Stress Inten-
namic Forces in an Axial Fatigue Testing System
sityFactorforEnvironment-AssistedCrackingofMetallic
E468Practice for Presentation of Constant Amplitude Fa-
Materials
tigue Test Results for Metallic Materials
E1737Test Method forJ-Integral Characterization of Frac-
3
ture Toughness (Withdrawn 1998)
E1820Test Method for Measurement of FractureToughness
1
ThisterminologyisunderthejurisdictionofASTMCommitteeE08onFatigue
E1921 Test Method for Determination of Reference
and Fracture and is the direct responsibility of Subcommittee E08.02 on Standards
Temperature, T , for Ferritic Steels in the Transition
and Terminology.
o
Current edition approved Dec. 15, 2012. Published February 2013. Originally
Range
approved in 1996. Last previous edition approved in 2012 as E1823–12d. DOI:
E1942GuideforEvaluatingDataAcquisitionSystemsUsed
10.1520/E1823-12E.
2 in Cyclic Fatigue and Fracture Mechanics Testing
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
E2207Practice for Strain-Controlled Axial-Torsional Fa-
Standards volume information, refer to the standard’s Document Summary page on
tigue Testing with Thin-Walled Tubular Specimens
the ASTM website.
3 E2208Guide for Evaluating Non-Contacting Optical Strain
The last approved version of this historical standard is referenced on
www.astm.org. Measurement Systems
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
E1823 − 12e
E2298Test Method for Instrumented Impact Testing of
Symbol Term
Metallic Materials
P mean force
m
E2443Guide for Verifying Computer-Generated Test Re-
P precrack force
M
sults Through The Use Of Standard Data Sets
P maximum force
max
P minimum force
E2472T
...

This document is not anASTM standard and is intended only to provide the user of anASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation:E1823–12d Designation: E1823 – 12e
Standard Terminology
1
Relating to Fatigue and Fracture Testing
This standard is issued under the fixed designation E1823; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.A
superscript epsilon (ϵ) indicates an editorial change since the last revision or reapproval.
1. Scope
1.1 This terminology contains definitions, definitions of terms specific to certain standards, symbols, and abbreviations
approved for use in standards on fatigue and fracture testing.The definitions are preceded by two lists.The first is an alphabetical
listing of symbols used. (Greek symbols are listed in accordance with their spelling in English.) The second is an alphabetical
listing of relevant abbreviations.
1.2 This terminology includesAnnexA1 on Units andAnnexA2 on Designation Codes for Specimen Configuration,Applied
Loading, and Crack or Notch Orientation.
2. Referenced Documents
2
2.1 ASTM Standards:
E6 Terminology Relating to Methods of Mechanical Testing
E23 Test Methods for Notched Bar Impact Testing of Metallic Materials
E28 Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus
E208 Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
E338 Test Method of Sharp-Notch Tension Testing of High-Strength Sheet Materials
E399 Test Method for Linear-Elastic Plane-Strain Fracture Toughness K of Metallic Materials
Ic
E436 Test Method for Drop-Weight Tear Tests of Ferritic Steels
E467 Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System
E468 Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials
E561 Test Method for K-R Curve Determination
E602 Test Method for Sharp-Notch Tension Testing with Cylindrical Specimens
E604 Test Method for Dynamic Tear Testing of Metallic Materials
E606 Practice for Strain-Controlled Fatigue Testing
E647 Test Method for Measurement of Fatigue Crack Growth Rates
E739 Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (-N) Fatigue Data
E740 Practice for Fracture Testing with Surface-Crack Tension Specimens
E813 Test Method for JIc, A Measure of Fracture Toughness
E992 Practice for Determination of Fracture Toughness of Steels Using Equivalent Energy Methodology
E1049 Practices for Cycle Counting in Fatigue Analysis
E1152 Test Method for Determining-J-R-Curves
E1221 Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, K , of Ferritic Steels
Ia
E1290 Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
E1304 Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
E1450 Test Method for Tension Testing of Structural Alloys in Liquid Helium
E1457 Test Method for Measurement of Creep Crack Growth Times in Metals
E1681 TestMethodforDeterminingThresholdStressIntensityFactorforEnvironment-AssistedCrackingofMetallicMaterials
E1737 Test Method for J-Integral Characterization of Fracture Toughness
E1820 Test Method for Measurement of Fracture Toughness
E1921 Test Method for Determination of Reference Temperature, T , for Ferritic Steels in the Transition Range
o
E1942 Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing
1
This terminology is under the jurisdiction ofASTM Committee E08 on Fatigue and Fracture and is the direct responsibility of Subcommittee E08.02 on Standards and
Terminology.
Current edition approved Nov.Dec. 15, 2012. Published February 2013. Originally approved in 1996. Last previous edition approved in 2012 as E1823–12cd. DOI:
10.1520/E1823-12DE.
2
ForreferencedASTMstandards,visittheASTMwebsite,www.astm.org,orcontactASTMCustomerServiceatservice@astm.org.ForAnnualBookofASTMStandards
volume information, refer to the standard’s Document Summary page on the ASTM website.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
E1823 – 12e
E2207 Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens
E2208 Guide for Evaluating Non-Contacting Optical Strain Measurement Systems
E2298 Test Method for Instrumented Impact Testing of Metallic Materials
E2443 Guide for Verifying Co
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM E1823-23(Terminology)
Standard Terminology Relating to Fatigue and Fracture Testing

SCOPE
1.1 This terminology contains definitions, definitions of terms specific to certain standards, symbols, and abbreviations approved for use in standards on fatigue and fracture testing. The definitions are preceded by two lists. The first is an alphabetical listing of symbols used. (Greek symbols are listed in accordance with their spelling in English.) The second is an alphabetical listing of relevant abbreviations.  
1.2 This terminology includes Annex A1 on Units and Annex A2 on Designation Codes for Specimen Configuration, Applied Loading, and Crack or Notch Orientation.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    25 pages
    English language
    sale 15% off
  • Standard
    25 pages
    English language
    sale 15% off
ASTM
ASTM E6-23a(Terminology)
Standard Terminology Relating to Methods of Mechanical Testing

SCOPE
1.1 This terminology covers the principal terms relating to methods of mechanical testing of solids. The general definitions are restricted and interpreted, when necessary, to make them particularly applicable and practicable for use in standards requiring or relating to mechanical tests. These definitions are published to encourage uniformity of terminology in product specifications.  
1.2 Terms relating to fatigue and fracture testing are defined in Terminology E1823.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    12 pages
    English language
    sale 15% off
ASTM
ASTM E1823-23(Terminology)
Standard Terminology Relating to Fatigue and Fracture Testing

SCOPE
1.1 This terminology contains definitions, definitions of terms specific to certain standards, symbols, and abbreviations approved for use in standards on fatigue and fracture testing. The definitions are preceded by two lists. The first is an alphabetical listing of symbols used. (Greek symbols are listed in accordance with their spelling in English.) The second is an alphabetical listing of relevant abbreviations.  
1.2 This terminology includes Annex A1 on Units and Annex A2 on Designation Codes for Specimen Configuration, Applied Loading, and Crack or Notch Orientation.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    25 pages
    English language
    sale 15% off
  • Standard
    25 pages
    English language
    sale 15% off
ASTM
ASTM B637-23(Specification)
Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service

ABSTRACT
This specification covers hot- and cold-worked precipitation-hardenable nickel alloy rod, bar, forgings, and forging stock for high-temperature service. Chemical analysis shall be performed on the alloy and shall conform to the chemical composition requirement in carbon, manganese, silicon, phosphorus, sulfur, chromium, cobalt, molybdenum, columbium, tantalum, titanium, aluminum, zirconium, boron, iron, copper, and nickel. The material shall follow recommended annealing treatment, solution treatment, stabilizing treatment, and precipitation hardening treatment. Tension testing, hardness testing and stress-rupture testing shall be performed on the material and shall comply to the required tensile strength, yield strength, elongation, reduction in area, and Brinell hardness.
SCOPE
1.1 This specification2 covers hot- and cold-worked precipitation-hardenable nickel alloy rod, bar, forgings, and forging stock for moderate or high temperature service (Table 1).  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    7 pages
    English language
    sale 15% off
  • Technical specification
    7 pages
    English language
    sale 15% off
ASTM
ASTM C596-23(Test Method)
Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement

SIGNIFICANCE AND USE
4.1 This test method establishes a selected set of conditions of temperature, relative humidity and rate of evaporation of the environment to which a mortar specimen of stated composition shall be subjected for a specified period of time during which its change in length is determined and designated “drying shrinkage.”  
4.2 The drying shrinkage of mortar as determined by this test method has a linear relation to the drying shrinkage of concrete made with the same cement and exposed to the same drying conditions.4 Hence this test method may be used when it is desired to develop data on the effect of a hydraulic cement on the drying shrinkage of concrete made with that cement.
SCOPE
1.1 This test method determines the change in length on drying of mortar bars containing hydraulic cement and graded standard sand.  
1.2 The values stated in SI units are to be regarded as standard. When combined standards are referenced, the selection of measurement system is at the user’s discretion subject to the requirements of the referenced standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Warning—Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure).2  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM F3337-23(Guide)
Standard Guide for Taking Property and Behavior Measurements on Weathered Fractions of Oil

SIGNIFICANCE AND USE
5.1 A standard procedure is necessary to establish property changes for spilled oils or petroleum products at different oil weathering stages.  
5.2 This procedure employs standardized equipment, and test procedures.  
5.3 This procedure should be performed at the stages of weathering corresponding to the spill conditions of interest.
SCOPE
1.1 This guide summarizes methods to fractionate oil by evaporative weathering and then measure the properties and behavior of the weathered oil. The results of this guide can provide oil behavior data for input into oil spill models and response method selection.  
1.2 This guide covers general procedures for oil weathering and behavior and does not cover all possible procedures which may be applicable to this topic.  
1.3 The results obtained using this guide are intended to provide baseline data for the behavior of oil and petroleum products when spilled and input to oil spill models.  
1.4 The results obtained using this guide can be used directly to predict certain facets of oil spill behavior or as input to oil spill models.  
1.5 The accuracy of the guide depends very much on the representative nature of the oil sample used. Certain oils can have different properties depending on their chemical contents at the moment a sample is taken.  
1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    4 pages
    English language
    sale 15% off
  • Guide
    4 pages
    English language
    sale 15% off
ASTM
ASTM F1210-23(Guide)
Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Lakes and Large Water Bodies

SIGNIFICANCE AND USE
3.1 This guide is meant to aid response teams who may use it during spill response planning and spill events.  
3.2 This guide should be adapted to site specific circumstance.
SCOPE
1.1 This guide covers the use of oil spill dispersants to assist in the control of oil spills. The guide is written with the goal of minimizing the environmental impacts of oil spills; this goal is the basis on which the recommendations are made. Aesthetic and socioeconomic factors are not considered, although these and other factors are often important in spill response.  
1.2 Spill responders have available several means to control or clean up spilled oil. Chemical dispersants should be given equal consideration with other spill countermeasures.  
1.3 This is a general guide only. Oil, as used in this guide, includes crude oils and refined petroleum products. Differences between individual dispersants or between different oil products are not considered. The dispersibility of the oil with the chosen dispersant should be evaluated.  
1.4 The guide is organized by habitat type, for example, small ponds and lakes, rivers and streams, and land. It considers the use of dispersants primarily to protect habitats from impact (or to minimize impacts).  
1.5 This guide applies only to freshwater and other inland environments. It does not consider the direct application of dispersants to subsurface waters.  
1.6 In making dispersant use decisions, appropriate government authorities should be consulted as required by law.  
1.7 This guide does not address getting regulatory approval.  
1.8 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    3 pages
    English language
    sale 15% off
  • Guide
    3 pages
    English language
    sale 15% off
ASTM
ASTM D8139-23(Specification)
Standard Specification for Semi-Rigid, Closed-Cell Polypropylene Foam, Preformed Expansion Joint Fillers for Concrete Paving and Structural Construction

SCOPE
1.1 This specification covers preformed expansion joint fillers made from closed-cell polypropylene foam materials having suitable compressibility, recovery from compression, nonextruding, and weather-resistant characteristics.  
1.1.1 Type I, closed-cell polypropylene foam.  
1.2 These joint fillers are intended for use in concrete pavements in full-depth joints. There are several variations in size with typical thicknesses of 1/2 in. (12.7 mm), 3/4 in. (19.05 mm), and 1 in. (25.4 mm); typical widths of 31/2 in. (88.9 mm), 4 in. (101.6 mm), 5 in. (127 mm), 6 in. (152.5 mm), 7 in. (177.8 mm), 8 in. (203.2 mm), or 48 in. (1.2 m) sheet; and typical lengths of 5 ft (1.52 m) and 10 ft (3.05 m).  
1.3 The values stated in inch-pound units are to be regarded as the standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D6390-23(Test Method)
Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures

SIGNIFICANCE AND USE
5.1 This test method can be used to determine whether the amount of draindown measured for a given asphalt mixture is within specified acceptable levels. The test provides an evaluation of the draindown potential of an asphalt mixture during mixture design and/or during field production. This test is primarily used for mixtures with high coarse aggregate content such as porous asphalt (open-graded friction course) and stone matrix asphalt (SMA).
Note 1: The quality of the results produced by this standard are dependent on the competence of the personnel performing the procedure and the capability, calibration, and maintenance of the equipment used. Agencies that meet the criteria of Specification D3666 are generally considered capable of competent and objective testing, sampling, inspection, etc. Users of this standard are cautioned that compliance with Specification D3666 alone does not completely ensure reliable results. Reliable results depend on many factors; following the suggestions of Specification D3666 or some similar acceptable guideline provides a means of evaluating and controlling some of those factors.
SCOPE
1.1 This test method covers the determination of the amount of draindown in an uncompacted asphalt mixture sample when the sample is held at elevated temperatures comparable to those encountered during the production, storage, transport, and placement of the mixture. The test is particularly applicable to mixtures such as porous asphalt (open-graded friction course) and stone matrix asphalt (SMA).  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D545-23(Test Method)
Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)

SIGNIFICANCE AND USE
3.1 The compression resistance perpendicular to the faces, the resistance to the extrusion during compression, and the ability to recover after release of the load are indicative of a joint filler's ability to continuously fill a concrete expansion joint and thereby prevent damage that might otherwise occur during thermal expansion. The asphalt content is a measure of the fiber-type joint filler's durability and life expectancy. In the case of cork-type fillers, the resistance to water absorption and resistance to boiling hydrochloric acid are relative measures of durability and life expectancy.
Note 2: The quality of the results produced by this standard are dependent on the competence of the personnel performing the procedure and the capability, calibration, and maintenance of the equipment used. Agencies that meet the criteria of Specification D3666 are generally considered capable of competent and objective testing, sampling, inspection, etc. Users of this standard are cautioned that compliance with Specification D3666 alone does not completely ensure reliable results. Reliable results depend on many factors; following the suggestions of Specification D3666 or some similar acceptable guideline provides a means of evaluating and controlling some of those factors.
SCOPE
1.1 These test methods cover the physical properties associated with preformed expansion joint fillers. The test methods include:    
Property  
Section  
Expansion in Boiling Water  
7.1  
Recovery and Compression  
7.2  
Extrusion  
7.3  
Boiling in Hydrochloric Acid  
7.4  
Asphalt Content  
7.5  
Water Absorption  
7.6  
Density  
7.7
Note 1: Specific test methods are applicable only to certain types of joint fillers, as stated herein.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 15% off