Protective gloves against dangerous chemicals and micro-organisms - Part 2: Determination of resistance to penetration

This European Standard specifies a test method for the penetration resistance of gloves that protect against dangerous chemicals and/or micro-organisms.

Schutzhandschuhe gegen gefährliche Chemikalien und Mikroorganismen - Teil 2: Bestimmung des Widerstandes gegen Penetration

Diese Europäische Norm legt ein Prüfverfahren für die Bestimmung des Widerstandes gegen Penetration von Handschuhen fest, die vor gefährlichen Chemikalien und/oder Mikroorganismen schützen.

Gants de protection contre les produits chimiques et les micro-organismes dangereux - Partie 2 : Détermination de la résistance à la pénétration

La présente Norme européenne spécifie une méthode d'essai pour la détermination de la résistance à la pénétration des gants de protection contre les produits chimiques et/ou micro-organismes dangereux.

Varovalne rokavice za zaščito pred kemikalijami in mikroorganizmi - 2. del: Ugotavljanje odpornosti proti penetraciji

Ta evropski standard določa preskusno metodo za odpornost proti penetraciji za varovalne rokavice za zaščito pred nevarnimi kemikalijami.

General Information

Status
Withdrawn
Publication Date
16-Dec-2014
Withdrawal Date
22-Oct-2019
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
23-Oct-2019

Relations

Buy Standard

Standard
EN 374-2:2015
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schutzhandschuhe gegen Chemikalien und Mikroorganismen - Teil 2 : Bestimmung des Widerstandes gegen PenetrationGants de protection contre les produits chimiques et les micro-organismes - Partie 2 : Détermination de la résistance à la pénétrationProtective gloves against chemicals and micro-organisms - Part 2: Determination of resistance to penetration13.340.40Varovanje dlani in rokHand and arm protectionICS:Ta slovenski standard je istoveten z:EN 374-2:2014SIST EN 374-2:2015en,fr,de01-februar-2015SIST EN 374-2:2015SLOVENSKI
STANDARDSIST EN 374-2:20031DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 374-2
December 2014 ICS 13.340.40 Supersedes EN 374-2:2003English Version
Protective gloves against dangerous chemicals and micro-organisms - Part 2: Determination of resistance to penetration
Gants de protection contre les produits chimiques et les micro-organismes dangereux - Partie 2 : Détermination de la résistance à la pénétration
Schutzhandschuhe gegen gefährliche Chemikalien und Mikroorganismen - Teil 2: Bestimmung des Widerstandes gegen Penetration This European Standard was approved by CEN on 22 November 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 374-2:2014 ESIST EN 374-2:2015

Informative annex to be used for quality assurance during production . 10
- Part 1: Terminology and performance requirements - Part 2: Determination of resistance to penetration - Part 3: Determination of resistance to permeation by chemicals - Part 4: Determination of resistance to degradation by chemicals - Part 5: Terminology and performance requirements for micro-organisms risks According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 374-2:2015
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.