EN 4644-002:2012

Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 002: Specification of performance and contact arrangements

This European Standard specifies the common conditions for rectangular electrical modular connectors for receptacles and plugs with interchangeable modules and a continuous operating temperature of 175 °C (or 125 °C).
Contact arrangements for fibre optic contacts are described in EN 4639-002.

Luft- und Raumfahrt - Elektrische und optische Rechtecksteckverbinder, modular, rechteckige Kontakteinsätze, Dauerbetriebstemperatur 175 °C (oder 125 °C) konstant - Teil 002: Leistungsdaten und Kontaktanordnungen

Diese Norm legt die allgemeinen Bedingungen für rechteckige modulare elektrische Steckverbinder für Buch-sen und Stecker mit austauschbaren Modulen und einer Dauerbetriebstemperatur von 175 °C (oder 125 °C) fest. Kontaktanordnungen für Glasfaserkontakte sind in EN 4639-002 beschrieben.

Série aérospatiale - Connecteur, électrique et optique, rectangulaire, modulaire, à inserts rectangulaires, température de fonctionnement 175 °C (ou 125 °C) continu - Partie 002 : Spécification de performances et arrangements de contacts

La présente Norme Européenne spécifie les conditions communes des connecteurs électriques rectangulaires
modulaires pour les embases et les fiches avec modules interchangeables et une température d'utilisation de
175 °C (ou 125 °C).
Les arrangements pour les contacts optiques sont décrits dans l'EN 4639-002.

Aeronavtika - Konektor, električni in optični, pravokotni, modularni, pravokotni vložki, stalna delovna temperatura 175 °C (ali 125 °C) - 002. del: Specifikacija lastnosti in razporeditev kontaktov

Ta evropski standard določa skupne pogoje v zvezi s pravokotnimi električnimi modularnimi konektorji za priključne doze in vtiče z zamenljivimi moduli pri stalni delovni temperaturi 175 °C (ali 125 °C). Razporeditev kontaktov za kontakte iz optičnih vlaken je opisana v standardu EN 4639-002.

General Information

• Status: Withdrawn
• Publication Date: 29-May-2012
• Withdrawal Date: 20-Dec-2016
• ICS: 49.060 - Aerospace electric equipment and systems
• ICS: 49.090 - On-board equipment and instruments
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 21-Dec-2016
• Ref Project: SIST EN 4644-002:2012 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 002: Specification of performance and contact arrangements

Relations

• Replaced By: EN 4644-002:2016 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 002: Specification of performance and contact arrangements
• Effective Date: 28-Dec-2016

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische und optische Rechtecksteckverbinder, modular, rechteckige Kontakteinsätze, Dauerbetriebstemperatur 175 °C (oder 125 °C) konstant - Teil 002: Leistungsdaten und KontaktanordnungenSérie aérospatiale - Connecteur, électrique et optique, rectangulaire, modulaire, à inserts rectangulaires, température de fonctionnement 175 °C (ou 125 °C) continu - Partie 002: Spécification de performances et arrangements de contactsAerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 002: Specification of performance and contact arrangements49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 4644-002:2012SIST EN 4644-002:2012en01-september-2012SIST EN 4644-002:2012SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4644-002
May 2012 ICS 49.060; 49.090 English Version
Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 002: Specification of performance and contact arrangements
Série aérospatiale - Connecteur, électrique et optique, rectangulaire, modulaire, à inserts rectangulaires, température de fonctionnement 175 °C (ou 125 °C) continu - Partie 002: Spécification de performances et arrangements de contacts
Luft- und Raumfahrt - Elektrische und optische Rechtecksteckverbinder, modular, rechteckige Kontakteinsätze, Dauerbetriebstemperatur 175 °C (oder 125 °C) konstant - Teil 002: Leistungsdaten und Kontaktanordnungen This European Standard was approved by CEN on 6 August 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4644-002:2012: ESIST EN 4644-002:2012

EN 4529-002, Aerospace series — Elements of electrical and optical connection — Sealing plugs — Part 002: Index of product standards EN 4639-002, Aerospace series — Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder — Part 002: List of product standards EN 4644-003, Aerospace series — Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous — Part 003: Rectangular inserts — Product standard EN 4644-011, Aerospace series — Connectors, electrical and optical, rectangular modular — Operating temperature 175°C (or 125°C) continuous — Part 011: Male housing size 1, class
A, C and E — Product standard EN 4644-012, Aerospace series — Connectors, electrical and optical, rectangular modular — Operating temperature 175°C (or 125°C)
continuous — Part 012: Female housing size 1, class
A, C and E — Product standard EN 4644-013, Aerospace series — Connectors, electrical and optical, rectangular modular — Operating temperature 175°C (or 125°C) continuous — Part 013: Male housing size 1 with ground blocks, class
B and F — Product standard EN 4644-014, Aerospace series — Connectors, electrical and optical, rectangular modular — Operating temperature 175°C (or 125°C)
continuous — Part 014: Female housing size 1 with ground blocks, class
B and F — Product standard EN 4644-021, Aerospace series — Connectors, electrical and optical, rectangular modular — Operating temperature 175°C (or 125°C) continuous — Part 021: Male housing size 2 without mounting holes; class
A, C and E — Product standard EN 4644-022, Aerospace series — Connectors, electrical and optical, rectangular modular — Operating temperature 175°C (or 125°C) continuous — Part 022: Male housing size 2 with mounting holes; class
A, C and E — Product standard EN 4644-023, Aerospace series — Connectors, electrical and optical, rectangular modular — Operating temperature 175°C (or 125°C) continuous — Part 023: Male housing size 2 with ground block; class
A, C and E — Product standard SIST EN 4644-002:2012

A and C — Product standard EN 4644-132, Aerospace series — Connectors, electrical and optical, rectangular modular — Operating temperature 175°C (or 125°C) continuous — Part 132: Female housing size 3 class
A and C — Product standard EN 4644-133, Aerospace series — Connectors, electrical and optical, rectangular modular — Operating temperature 175°C (or 125°C) continuous — Part 133: Female housing size 3 with float mount class
A and C — Product standard EN 4644-141, Aerospace series — Connectors, electrical and optical, rectangular modular — Operating temperature 175°C (or 125°C) continuous — Part 141: Male housing size 4 class
A and C — Product standard EN 4644-142, Aerospace series —Connectors, electrical and optical, rectangular modular — Operating temperature 175°C (or 125°C) continuous — Part 142: Female housing size 4 class
A and C — Product standard EN 4644-201, Aerospace series — Connectors, electrical and optical, rectangular modular — Operating temperature 175°C continuous — Part 201: Locking and polarising system for housing size 2 — Product standard EN 4644-202, Aerospace series — Connectors, electrical and optical, rectangular modular — Operating temperature 175°C continuous — Part 202: Polarising hardware — Product standard EN 4644-203, Aerospace series — Con
...