EN ISO 9073-13:2007

Textiles - Test methods for nonwovens - Part 13: Repeated liquid strike-through time (ISO 9073-13:2006)

ISO 9073-13:2006 specifies a test method for measuring the strike-through time (STT) for each of three subsequent doses of liquid (simulated urine) applied to the surface of a test piece of nonwoven coverstock. The STT is defined as the time taken for a known volume of liquid to pass through the nonwoven that is in contact with an underlying dry standard absorbent pad.
This test method is intended for quality control and is designed for comparison of STT for different nonwoven coverstocks. It does not simulate in-use conditions for finished products.

Textilien - Prüfverfahren für Vliesstoffe - Teil 13: Wiederholte Durchdringzeit von Flüssigkeiten (ISO 9073-13:2006)

Dieser Teil der ISO 9073 legt ein Prüfverfahren zur Messung der Durchdringzeit (STT, en: strike through time) für jede von drei aufeinander folgenden Dosen von Flüssigkeit (simulierter Urin) fest, die auf die Oberfläche einer Messprobe einer Vliesstoff Auflage aufgebracht werden. Die STT ist als die Zeit definiert, die ein bekanntes Flüssigkeitsvolumen benötigt, um durch den Vliesstoff hindurchzugehen, der sich mit einer darunter liegenden trockenen saugfähigen Normunterlage in Kontakt befindet.
Dieses Prüfverfahren ist für die Qualitätskontrolle vorgesehen und für den Vergleich der STT für verschiedene Vliesstoff Auflagen ausgelegt. Es simuliert keine Einsatzbedingungen für Endprodukte.

Textiles - Méthodes d'essai pour nontissés - Partie 13: Temps de transpercement successifs des liquides (ISO 9073-13:2006)

L'ISO 9073-13:2006 spécifie une méthode d'essai permettant de mesurer le temps de transpercement (TT) de trois quantités de liquide (urine artificielle) appliquées successivement à la surface d'une éprouvette prélevée dans une enveloppe de couche-culotte en nontissé. Le TT est défini comme le temps que met un volume connu de liquide pour s'écouler à travers un nontissé placé au-dessus d'un coussin absorbant sec normalisé et en contact direct avec lui.
La présente méthode d'essai est destinée à être utilisée dans le cadre de contrôles qualité et pour comparer le TT de différentes enveloppes de couche-culotte en nontissé. Elle ne permet pas de simuler les conditions d'utilisation des produits finis.

Tekstilije - Metode preskušanja vlaknovin - 13. del: Čas zapovrstnega prepuščanja tekočin (ISO 9073-13:2006)

General Information

• Status: Withdrawn
• Publication Date: 20-Feb-2007
• Withdrawal Date: 13-Jun-2023
• ICS: 59.080.30 - Textile fabrics
• Technical Committee: CEN/TC 248 - Textiles and textile products
• Drafting Committee: CEN/TC 248 - Textiles and textile products
• Ref Project: SIST EN ISO 9073-13:2007 - Textiles - Test methods for nonwovens - Part 13: Repeated liquid strike-through time (ISO 9073-13:2006)

Relations

• Replaced By: EN ISO 9073-13:2023 - Nonwovens - Test methods - Part 13: Repeated liquid strike-through time (simulated urine) (ISO 9073-13:2023)
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2007
7HNVWLOLMH0HWRGHSUHVNXãDQMDYODNQRYLQGHOýDV]DSRYUVWQHJDSUHSXãþDQMD
WHNRþLQ,62
Textiles - Test methods for nonwovens - Part 13: Repeated liquid strike-through time
(ISO 9073-13:2006)
Textilien - Prüfverfahren für Vliesstoffe - Teil 13: Wiederholte Durchdringzeit von
Flüssigkeiten (ISO 9073-13:2006)
Textiles - Méthodes d'essai pour nontissés - Partie 13: Temps de transpercement
successifs des liquides (ISO 9073-13:2006)
Ta slovenski standard je istoveten z: EN ISO 9073-13:2007
ICS:
59.080.30 Tkanine Textile fabrics
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 9073-13
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2007
ICS 59.080.30
English Version
Textiles - Test methods for nonwovens - Part 13: Repeated
liquid strike-through time (ISO 9073-13:2006)
Textiles - Méthodes d'essai pour nontissés - Partie 13: Textilien - Prüfverfahren für Vliesstoffe - Teil 13:
Temps de transpercement successifs des liquides (ISO Wiederholte Durchdringzeit von Flüssigkeiten (ISO 9073-
9073-13:2006) 13:2006)
This European Standard was approved by CEN on 21 January 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9073-13:2007: E
worldwide for CEN national Members.

Foreword
The text of ISO 9073-13:2006 has been prepared by Technical Committee ISO/TC 38 "Textiles”
of the International Organization for Standardization (ISO) and has been taken over as EN ISO
9073-13:2007 by Technical Committee CEN/TC 248 "Textiles and textile products", the
secretariat of which is held by BSI.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by August 2007, and conflicting national
standards shall be withdrawn at the latest by August 2007.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United
Kingdom.
Endorsement notice
The text of ISO 9073-13:2006 has been approved by CEN as EN ISO 9073-13:2007 without any
modifications.
INTERNATIONAL ISO
STANDARD 9073-13
First edition
2006-04-01
Textiles — Test methods
for nonwovens —
Part 13:
Repeated liquid strike-through time
Textiles — Méthodes d'essai pour nontissés —
Partie 13: Temps de transpercement successifs des liquides

Reference number
ISO 9073-13:2006(E)
©
ISO 2006
ISO 9073-13:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved

ISO 9073-13:2006(E)
Contents Page
Foreword. iv
1 Scope . 1
2 Normative references . 1
3 Principle. 1
4 Material and reagents. 1
5 Apparatus . 2
6 Procedure . 2
7 Test report . 3
8 Precision. 3
Annex A (informative) Precision . 6
Bibliography . 7

ISO 9073-13:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 9073-13 was prepared by Technical Committee ISO/TC 38, Textiles.
ISO 9073 consists of the following parts, under the general title Textiles — Test methods for nonwovens:
⎯ Part 1: Determination of mass per unit area
⎯ Part 2: Determination of thickness
⎯ Part 3: Determination of tensile strength and elongation
⎯ Part 4: Determination of tear resistance
⎯ Part 6: Absorption
⎯ Part 7: Determination of bending length
⎯ Part 8: Determination of liquid strike-through time (simulated urine)
⎯ Part 9: Evaluation of drapability including drape coefficient
⎯ Part 10: Lint and other particles generation in the dry state
⎯ Part 11: Run-off
⎯ Part 12: Demand absorbency
⎯ Part 13: Repeated liquid strike-through time
⎯ Part 14: Coverstock wetback
The following parts are under preparation:
⎯ Part 15: Evaluation of air permeability
⎯ Part 16: Evaluation of water resistance (hydrostatic pressure test)
iv © ISO 2006 – All rights reserved

ISO 9073-13:2006(E)
⎯ Part 17: Evaluation of water penetration (spray impact) test
⎯ Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test
INTERNATIONAL STANDARD ISO 9073-13:2006(E)

Textiles — Test methods for nonwovens —
Part 13:
Repeated liqui
...