EN 14081-4:2005+A1:2007
(Main)Timber structures - Strength graded structural timber with rectangular cross section - Part 4: Machine grading - Grading machine settings for machine controlled systems
Timber structures - Strength graded structural timber with rectangular cross section - Part 4: Machine grading - Grading machine settings for machine controlled systems
This European Standard gives settings, derived according to the requirements given in EN 14081-2, for various combinations of strength classes or grades, grading machines and species from particular sources of growth. These settings are only applicable to timber from the sources indicated in the tables.
Holzbauwerke - Nach Festigkeit sortiertes Bauholz für tragende Zwecke mit rechteckigem Querschnitt - Teil 4: Maschinelle Sortierung - Einstellungen von Sortiermaschinen für maschinenkontrollierte Systeme
Structures en bois - Bois de structure de section rectangulaire classé selon la résistance - Partie 4: Classement par machine - Réglages pour les systèmes de contrôle par machine
La présente Norme européenne donne les réglages, obtenus conformément aux exigences de l’EN 14081-2, relatifs aux différentes combinaisons de classes ou catégories de résistance, aux machines de classement et aux essences issues de différentes sources. Ces réglages ne sont applicables qu'aux bois provenant des sources indiquées dans les tableaux.
Lesene konstrukcije - Razvrščanje konstrukcijskega lesa pravokotnega prečnega prereza po trdnosti - 4. del: Strojno razvrščanje – Nastavitve strojev za razvrščanje pri strojno kontroliranih sistemih
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Holzbauwerke - Nach Festigkeit sortiertes Bauholz für tragende Zwecke mit rechteckigem Querschnitt - Teil 4: Maschinelle Sortierung - Einstellungen von Sortiermaschinen für maschinenkontrollierte SystemeStructures en bois - Bois de structure de section rectangulaire classé selon la résistance - Partie 4: Classement par machine - Réglages pour les systemes de contrôle par machineTimber structures - Strength graded structural timber with rectangular cross section - Part 4: Machine grading - Grading machine settings for machine controlled systems91.080.20Lesene konstrukcijeTimber structures79.040Les, hlodovina in žagan lesWood, sawlogs and sawn timberICS:Ta slovenski standard je istoveten z:EN 14081-4:2005+A1:2007SIST EN 14081-4:2006+A1:2007en,fr,de01-september-2007SIST EN 14081-4:2006+A1:2007SLOVENSKI
STANDARD
SIST EN 14081-4:2006+A1:2007
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14081-4:2005+A1
February 2007 ICS 91.080.20 Supersedes EN 14081-4:2005English Version
Timber structures - Strength graded structural timber with rectangular cross section - Part 4: Machine grading - Grading machine settings for machine controlled systems
Structures en bois - Bois de structure de section rectangulaire clasé selon la résistance - Partie 4: Classement par machine -Réglages pour les systèmes de contrôle par machine
Holzbauwerke - Nach Festigkeit sortiertes Bauholz für tragende Zwecke mit rechteckigem Querschnitt - Teil 4: Maschinelle Sortierung - Einstellungen von Sortiermaschinen für maschinenkontrollierte Systeme This European Standard was approved by CEN on 26 August 2005 and includes Amendment 1 approved by CEN on 28 December 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14081-4:2005+A1:2007: ESIST EN 14081-4:2006+A1:2007
EN 14081-4:2005+A1:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Symbols.4 5 Settings for timber strength grading machines.5
SIST EN 14081-4:2006+A1:2007
EN 14081-4:2005+A1:2007 (E) 3 Foreword This European Standard (EN 14081-4:2005+A1:2007) has been prepared by Technical Committee CEN/TC 124 “Timber structures”, the secretariat of which is held by SFS. This document shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2007 and conflicting national standards shall be withdrawn at the latest by August 2007. This document includes Amendment 1, approved by CEN on 2006-12-28. This document supersedes EN 14081-4:2005. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! ". Other parts of this European Standard are EN 14081-1, Timber structures - Strength graded structural timber with rectangular cross section -
Part 1: General requirements EN 14081-2, Timber structures - Strength graded structural timber with rectangular cross section -
Part 2: Machine Grading - Additional requirements for initial type t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.