EN 408:2010+A1:2012

Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties

This European Standard specifies test methods for determining the following properties of structural timber and glued laminated timber: modulus of elasticity in bending; shear modulus; bending strength; modulus of elasticity in tension parallel to the grain; tension strength parallel to the grain; modulus of elasticity in compression parallel to the grain; compression strength parallel to the grain; modulus of elasticity in tension perpendicular to the grain; tension strength perpendicular to the grain; modulus of elasticity in compression perpendicular to the grain; compression strength perpendicular to the grain and shear strength.
In addition, the determination of dimensions, moisture content, and density of test pieces are specified.
The methods apply to rectangular and circular shapes (of substantially constant cross section) of solid unjointed timber or finger-jointed timber and glued laminated timber unless stated otherwise.

Holzbauwerke - Bauholz für tragende Zwecke und Brettschichtholz - Bestimmung einiger physikalischer und mechanischer Eigenschaften

Diese Europäische Norm legt Prüfverfahren zur Bestimmung der folgenden Eigenschaften von Bauholz für tragende Zwecke und Brettschichtholz fest: Biege-Elastizitätsmodul, Schubmodul, Biegefestigkeit, Zug-Elasti¬zitätsmodul in Faserrichtung, Zugfestigkeit in Faserrichtung, Druck-Elastizitätsmodul in Faserrichtung, Druck¬festigkeit in Faserrichtung, Zug-Elastizitätsmodul rechtwinklig zur Faserrichtung, Zugfestigkeit rechtwinklig zur Faserrichtung, Druck-Elastizitätsmodul rechtwinklig zur Faserrichtung, Druckfestigkeit rechtwinklig zur Faser¬richtung sowie die Scherfestigkeit.
Zusätzlich wird die Bestimmung der Maße, der Holzfeuchte und der Rohdichte festgelegt.
Sofern nicht anders angegeben, gelten die Verfahren für rechteckige und kreisförmige Formen (mit im Wesentlichen konstantem Querschnitt) aus ungestoßenem oder keilgezinktem Bauholz und Brettschichtholz.

Structures en bois - Bois de structure et bois lamellé-collé - Détermination de certaines propriétés physiques et mécaniques

La présente Norme européenne définit des méthodes d'essai pour déterminer les propriétés suivantes du bois de structure et du bois lamellé-collé : le module d'élasticité en flexion, le module de cisaillement, la résistance à la flexion, le module d'élasticité en traction axiale, la résistance à la traction axiale, le module d'élasticité en compression axiale, la résistance à la compression axiale, le module d'élasticité en traction transversale, la résistance à la traction transversale, le module d'élasticité en compression transversale, la résistance à la compression transversale et la résistance au cisaillement.
La détermination des dimensions, de la teneur en humidité et de la masse volumique des éprouvettes d'essai est également définie.
Sauf indication contraire, les méthodes s'appliquent aux bois massifs non aboutés ou aboutés par entures multiples et aux bois lamellés-collés, de formes rectangulaire et circulaire (de section relativement constante).

Lesene konstrukcije - Konstrukcijski les in lepljeni lamelirani les - Ugotavljanje nekaterih fizikalnih in mehanskih lastnosti

Ta evropski standard določa preskusne metode za ugotavljanje naslednjih lastnosti strukturnega lesa in lameliranega lepljenega lesa: modul elastičnosti upogibanja; strižni modul; moč upogibanja; modul elastičnosti pri napetosti, vzporedni z vlakni; modul elastičnosti pri moči stiskanja, vzporedni z vlakni; modul elastičnosti pri napetosti navpično na vlakna; moč stiskanja navpično na vlakna; modul elastičnosti pri stiskanju navpično na vlakna; moč stiskanja navpično na vlakna in moč striženja. Poleg tega je opredeljeno določevanje dimenzij, vlage in gostote preskušancev. Metode veljajo za pravokotne in okrogle oblike (konstantnega prereza) trdnega nespajanega lesa ali lesa, spajanega z zobatimi spoji, ter lameliranega lepljenega lesa, razen če je navedeno drugače.

General Information

• Status: Published
• Publication Date: 24-Jul-2012
• Withdrawal Date: 30-Jan-2013
• ICS: 79.040 - Wood, sawlogs and sawn timber
• ICS: 79.060.99 - Other wood-based panels
• ICS: 91.080.20 - Timber structures
• Technical Committee: CEN/TC 124 - Timber structures
• Drafting Committee: CEN/TC 124/WG 1 - Test methods
• Current Stage: 9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
• Completion Date: 04-Jan-2023
• Ref Project: SIST EN 408:2010+A1:2012 - Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties

Relations

• Merged From: EN 408:2010/FprA1 - Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties.
• Effective Date: 19-Jan-2023
• Merged From: EN 408:2010 - Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties
• Effective Date: 18-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lesene konstrukcije - Konstrukcijski les in lepljeni lamelirani les - Ugotavljanje nekaterih fizikalnih in mehanskih lastnostiHolzbauwerke - Bauholz für tragende Zwecke und Brettschichtholz - Bestimmung einiger physikalischer und mechanischer EigenschaftenStructures en bois - Bois de structure et bois lamellé-collé - Détermination de certaines propriétés physiques et mécaniquesTimber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties91.080.20Lesene konstrukcijeTimber structures79.040Les, hlodovina in žagan lesWood, sawlogs and sawn timberICS:Ta slovenski standard je istoveten z:EN 408:2010+A1:2012SIST EN 408:2010+A1:2012en,fr,de01-december-2012SIST EN 408:2010+A1:2012SLOVENSKI
STANDARDSIST EN 408:20101DGRPHãþD



SIST EN 408:2010+A1:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 408:2010+A1
July 2012 ICS 91.080.20; 79.040; 79.060.99 English Version
Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties
Structures en bois - Bois de structure et bois lamellé-collé -Détermination de certaines propriétés physiques et mécaniques
Holzbauwerke - Bauholz für tragende Zwecke und Brettschichtholz - Bestimmung einiger physikalischer und mechanischer Eigenschaften This European Standard was approved by CEN on 16 June 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 408:2010+A1:2012: ESIST EN 408:2010+A1:2012



EN 408:2010+A1:2012 (E) 2 Contents Page Foreword .4Introduction .51 Scope .62 Normative references .63 Terms and definitions .64 Symbols and abbreviations .65 Determination of dimensions of test pieces .86 Determination of moisture content of test pieces .87 Determination of density of test pieces .88 Conditioning of test pieces .89 Determination of local modulus of elasticity in bending .99.1 Test piece .99.2 Procedure .99.3 Expression of results . 1010 Determ
...