Textile floor coverings - Classification of textile floor coverings without pile

This European Standard specifies the requirements for the classification of textile floor coverings without pile into use classes in respect of wear and appearance retention, and classes for luxury rating. This standard is applicable to all textile floor coverings without pile that are not covered in other standards, including EN 1307, EN 1470 and EN 13297.
This standard refers to the classification as defined in EN 685.
This standard is also applicable to tiles, the additional requirements for which are given in Annex A.
This standard is not applicable to rugs.
The symbols for the use classes, luxury rating classes and additional characteristics are listed in
CEN/TS 15398 and can also be found on www.floorsymbols.com .

Textile Bodenbeläge - Einstufung textiler Bodenbeläge ohne Pol

Diese Europäische Norm legt die Anforderungen an die Einstufung von textilen Bodenbelägen ohne Pol in
Gebrauchsklassen bezüglich Verschleiß und Aussehenserhalt und in Komfortklassen fest. Diese Norm gilt für
alle textilen Bodenbeläge ohne Pol, die in anderen Normen einschließlich EN 1307, EN 1470 und EN 13297
nicht erfasst sind.
Die vorliegende Norm bezieht sich auf die Einstufung nach EN 685.
Diese Norm gilt auch für Fliesen, für die die zusätzlichen Anforderungen in Anhang A enthalten sind.
Die Norm gilt nicht für abgepasste Teppiche.
Die Symbole für die Gebrauchsklassen, Komfortklassen und zusätzlichen Eigenschaften sind in
CEN/TS 15398 aufgeführt und auch unter www.floorsymbols.com einsehbar.

Revêtements de sol textiles - Classification des revêtements de sol textiles, plats, tissés, tricotés ou aiguilletés sans velours

La présente Norme européenne spécifie les exigences relatives à la classification en classes d’usage des revêtements de sol textiles sans velours, en fonction de la résistance à l’usure et de la conservation d’aspect, ainsi qu’en fonction des classes de confort. La présente Norme s’applique à tous les revêtements de sol sans velours non traités dans d’autres normes, y compris dans l’EN 1307, l’EN 1470 et l’EN 13297.
La présente Norme se rapporte à la classification telle que définie par l’EN 685.
Cette Norme s’applique également aux dalles dont les exigences complémentaires figurent à l’Annexe A.
Cette Norme ne s’applique pas aux carpettes.
Les symboles correspondant aux classes d’usage, aux classes de confort et aux caractéristiques complémentaires sont répertoriés dans le CEN/TS 15398 et se trouvent également sur le site web www.floorsymbols.com.

Tekstilne talne obloge - Razvrščanje nelasastih talnih oblog

General Information

Status
Withdrawn
Publication Date
09-Sep-2008
Withdrawal Date
06-May-2014
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
07-May-2014
Completion Date
07-May-2014

Relations

Buy Standard

Standard
EN 15114:2007+A1:2008
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Textile Bodenbeläge - Einstufung textiler Bodenbeläge ohne PolRevêtements de sol textiles - Classification des revêtements de sol textiles, plats, tissés, tricotés ou aiguilletés sans veloursTextile floor coverings - Classification of textile floor coverings without pile59.080.60Tekstilne talne oblogeTextile floor coveringsICS:Ta slovenski standard je istoveten z:EN 15114:2006+A1:2008SIST EN 15114:2007+A1:2008en,fr,de01-december-2008SIST EN 15114:2007+A1:2008SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15114:2006+A1
September 2008 ICS 59.080.60 Supersedes EN 15114:2006English Version
Textile floor coverings - Classification of textile floor coverings without pile
Revêtements de sol textiles - Classification des revêtements de sol textiles plats, tissés, tricotés ou aiguilletés sans velours
Textile Bodenbeläge - Einstufung textiler Bodenbeläge ohne Pol This European Standard was approved by CEN on 14 August 2006 and includes Corrigendum 1 issued by CEN on 24 October 2007 and Amendment 1 approved by CEN on 30 July 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15114:2006+A1:2008: ESIST EN 15114:2007+A1:2008

Additional requirements for tiles.12 A.1 Scope.12 A.2 Definitions.12 A.3 Requirements.13 Annex B (normative)
Suitability for underfloor heating.14 Annex C (normative)
Colour change due to soiling subsequent to spilled water.15 Annex D (normative)
Suitability to stairs.16 Annex E (normative)
Summary test report.18 Bibliography.23
CEN/TS 15398 and can also be found on www.floorsymbols.com . 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 685 Resilient, textile and laminate floor coverings — Classification EN 985:2001 Textile floor coverings — Castor chair test EN 986:2005 Textile floor coverings — Tiles — Determination of dimensional changes due to the effects of varied water and heat conditions, and distortion out of plane EN 994 Textile floor coverings — Determination of the side length, squareness and straightness of tiles EN 995 Textile floor coverings — Assessment of the creep of backings EN 1269 Textile floor coverings — Assessment of impregnations in needled floorcoverings by means of a soiling test EN 1307:2005 Textile floor coverings — Classification of pile carpet EN 1318 Textile floor coverings — Determination of the apparent effective thickness of the backing EN 1471 Textile floor coverings — Assessment of changes in appearance EN 1814
Textile floor coverings — Determination of resistance to damage at cut edges using the modified Vettermann drum test !EN 1963:2007" Textile floor coverings — Tests using the Lisson Tretrad Machine EN 14041 Resilient, textile and laminate floor coverings — Essential characteristics CEN/TS 14159 Textile floor coverings — Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat !EN 15115" Textile floor coverings — Determination of sensitivity to spilled water CEN/TS 15398 Resilient, textile and laminate floor coverings — Floor covering standard symbols EN ISO 105-A01 Textiles - Tests for colour fastness — Part A01: General principles of testing (ISO 105-A01:1994)
Acoustics — Measurement of sound absorption in a reverberation room (ISO 354: 2003) EN ISO 717-2 Acoustics — Rating of sound insulation in buildings and building elements —
Part 2: Impact sound insulation (ISO 717-2: 1996) EN ISO 11378-2:2001 Textile floor coverings — Laboratory soiling tests—Part 2:Drum test (ISO 11378-2: 2001) ISO 1765 Machine-made textile floor coverings — Determination of thickness ISO 2424:1992 Textile floor coverings — Vocabulary ISO 2551 Machine-made textile floor coverings — Determination of dimensional changes due to the effects of varied water and heat conditions ISO 6356 Textile floor coverings — Assessment of static electrical propensity — Walking test ISO 8302 Thermal insulation — Determination of steady-state thermal resistance and related properties — Guarded hot plate apparatus ISO 8543 Textile floor coverings — Methods for determination of mass ISO 10361 Textile floor coverings — Production of changes in appearance by means of Vettermann drum and hexapod tumbler testers ISO 10965
Textile floor coverings — Determination of electrical resistance 3 Identification requirements This clause specifies the characteristics for identifying the product and tolerance requirements for the identifying properties. The manufacturer shall provide the following information in accordance with the definitions in ISO 2424:1992:  commercial references;  type of installation (loose laid, adhered, .);  type of backing;  type of manufacture
and shall declare values of the characteristics in Table 1. SIST EN 15114:2007+A1:2008

mm ISO 1765 nominal +/- 10 % Total mass per unit area
g/m2
ISO 8543 nominal mass +/- 10 % Apparent thickness of foam backing (if applicable)
EN 1318 nominal +/- 0,5 mm a
Attention is drawn to the European Directives 96/73 and 96/74, which cover the fibre composition and are reflected in the national regulations.
4 Basic requirements 4.1 General Textile floor coverings without pile shall conform to the basic requirements specified in Table 2. Table 2 — Basic requirements
Characteristic RequirementTest method Colour fastness to Light a EN ISO 105 B02
- General ≥5
- Pastel shade b
≥ 4
Rubbing
EN ISO 105 X12
- Wet ≥3
- Dry ≥3 -4
Water (change in colour)
EN ISO 105 E01
- Plain carpets ≥3 -4
- Other carpets ≥4
Water (staining)
- All carpets ≥ 2 - 3 c
Hairiness (pilling) e
!EN 1963:2007" – Test D
≥ 2,5 Assess against photoscale after 200 cycles Colour change d
- due to spilled water
≥ 4 !EN 15115" - due to subsequent soiling
≥ 3 & Annex B Dimensional stability f Shrinkage ≤ 1,2 % in ISO 2551
each direction
Extension ≤ 0,5 % in
each direction
a
Conformity to be declared by the manufacturer for each colour.b
Pastel shade: colour corresponding to a standard depth ≤ 1/12 (in accordance with EN ISO 105 A01). c
On multifibre: worst result. d
Conformity to be declared by the manufacturer. e
Tested production-wise and cross-wise, worst result decisive. f
Not applicable to tiles (see Annex A), not applicable for permanently bonded textile floor coverings.SIST EN 15114:2007+A1:2008

Use intensity Domestic
Moderate / light
General / medium
22+
General
Heavy
Commercial a
Moderate
General
He
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.