EN 206-1:2000/A1:2004

Concrete - Part 1: Specification performance, production and conformity

UAP of 6 months (NT/020606).

Beton - Teil 1: Festlegung, Eigenschaften, Herstellung und Konformität

Béton - Partie 1 : Spécification, performance, production et conformité

Beton - 1. del: Specifikacija lastnosti, proizvodnja in skladnost

General Information

• Status: Withdrawn
• Publication Date: 27-Jul-2004
• Withdrawal Date: 03-Dec-2013
• ICS: 91.100.30 - Concrete and concrete products
• Technical Committee: CEN/TC 104 - Concrete ( performance, production, placing and compliance criteria )
• Drafting Committee: CEN/TC 104/SC 1 - Revision of ENV 206
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 04-Dec-2013
• Completion Date: 04-Dec-2013
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/128 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on products for concrete, mortar and grout
• Ref Project: SIST EN 206-1:2003/A1:2004 - Concrete - Part 1: Specification performance, production and conformity

Relations

• Replaced By: EN 206:2013 - Concrete - Specification, performance, production and conformity
• Effective Date: 11-Dec-2013
• Amends: EN 206-1:2000 - Concrete - Part 1: Specification, performance, production and conformity
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2004
Beton - 1. del: Specifikacija lastnosti, proizvodnja in skladnost
Concrete - Part 1: Specification performance, production and conformity
Beton - Teil 1: Festlegung, Eigenschaften, Herstellung und Konformität
Béton - Partie 1 : Spécification, performance, production et conformité
Ta slovenski standard je istoveten z: EN 206-1:2000/A1:2004
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 206-1:2000/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2004
ICS 91.100.30
English version
Concrete - Part 1: Specification performance, production and
conformity
Béton - Partie 1 : Spécification, performance, production et Beton - Teil 1: Festlegung, Eigenschaften, Herstellung und
conformité Konformität
This amendment A1 modifies the European Standard EN 206-1:2000; it was approved by CEN on 22 October 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 206-1:2000/A1:2004: E
worldwide for CEN national Members.

Foreword
This document (EN 206-1:2000/A1:2004) has been prepared by Technical Committee CEN/TC 104 “Concrete
and related products”, the secretariat of which is held by DIN.
This Amendment to the document EN 206-1:2000 shall be given the status of a national standard, either by
publication of an identical text or by endorsement, at the latest by January 2005, and conflicting national
standards shall be withdrawn at the latest by January 2005.
This document covers matters for which the need for amendments or corrections to
EN 206-1: 2000-12 has been identified by CEN/TC 104 “Concrete and related products”
The numbering and headlines in the following correspond to the those in EN 206-1 for which the amendments
and corrections apply.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estoni
...