EN 12493:2008/FprA1
(Amendment)LPG equipment and accessories - Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers - Design and manufacture
LPG equipment and accessories - Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers - Design and manufacture
This European Standard specifies minimum requirements for materials, design, construction and workmanship procedures, and tests for welded LPG road tanker tanks and their welded attachments manufactured from carbon, carbon/manganese and micro alloy steels.
There is no upper size limit as this is determined by the gross vehicle weight limitation.
This European Standard does not cover tanks for tank containers.
NOTE 1 In the context of this standard the term "road tanker" is understood to mean “fixed tanks” and “demountable tanks” as defined in ADR.
NOTE 2 The equipment of the tanks and the inspection and testing after assembly is covered by EN 12252, and EN 14334, respectively.
NOTE 3 The design type of the road tanker is subject to the approval by the competent authority, as required by ADR.
Flüssiggas-Geräte und Ausrüstungsteile - Geschweißte Druckbehälter aus Stahl für Flüssiggas (LPG) - Konstruktion und Herstellung von Straßentankfahrzeugen
Équipements pour GPL et leurs accessoires - Réservoirs en acier soudés pour gaz de pétrole liquéfié (GPL) - Conception et construction des camions-citernes
Oprema in pribor za utekočinjeni naftni plin (UNP) - Varjene jeklene posode za utekočinjeni naftni plin (UNP) - Cestne cisterne - Konstruiranje in izdelava - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 12493:2008/kFprA1:2011
01-november-2011
2SUHPDLQSULERU]DXWHNRþLQMHQLQDIWQLSOLQ 813 9DUMHQHMHNOHQHSRVRGH]D
XWHNRþLQMHQLQDIWQLSOLQ 813 &HVWQHFLVWHUQH.RQVWUXLUDQMHLQL]GHODYD
'RSROQLOR$
LPG equipment and accessories - Welded steel tanks for liquefied petroleum gas (LPG) -
Road tankers - Design and manufacture
Flüssiggas-Geräte und Ausrüstungsteile - Geschweißte Druckbehälter aus Stahl für
Flüssiggas (LPG) - Konstruktion und Herstellung von Straßentankfahrzeugen
Équipements pour GPL et leurs accessoires - Réservoirs en acier soudés pour gaz de
pétrole liquéfié (GPL) - Conception et construction des camions-citernes
Ta slovenski standard je istoveten z: EN 12493:2008/FprA1
ICS:
23.020.20 Posode in vsebniki, montirani Vessels and containers
na vozila mounted on vehicles
43.080.10 Tovornjaki in priklopniki Trucks and trailers
SIST EN 12493:2008/kFprA1:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 12493:2008/kFprA1:2011
---------------------- Page: 2 ----------------------
SIST EN 12493:2008/kFprA1:2011
EUROPEAN STANDARD
FINAL DRAFT
EN 12493:2008
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
September 2011
ICS 23.020.30
English Version
LPG equipment and accessories - Welded steel tanks for
liquefied petroleum gas (LPG) - Road tankers - Design and
manufacture
Équipements pour GPL et leurs accessoires - Réservoirs Flüssiggas-Geräte und Ausrüstungsteile - Geschweißte
en acier soudés pour gaz de pétrole liquéfié (GPL) -
Druckbehälter aus Stahl für Flüssiggas (LPG) -
Conception et construction des camions-citernes Konstruktion und Herstellung von Straßentankfahrzeugen
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 286.
This draft amendment A1, if approved, will modify the European Standard EN 12493:2008. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12493:2008/FprA1:2011: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 12493:2008/kFprA1:2011
EN 12493:2008/FprA1:2011 (E)
Contents Page
Foreword .3
1 Modification to the Introduction .4
2 Modification to Clause 3 .4
2.1 Modification to 3.5 .4
2.2 Modification to 3.6 .4
2.3 Modification to 3.8 .4
2.4 Add new term and definition 3.9 .4
3 Modification to Clause 4 .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.