EN 1906:2002

Building hardware - Lever handles and knob furniture - Requirements and test methods

This European Standard specifies test methods and requirements for spindle and fastening elements, operating torques, permissible free play and safety, free angular movement and misalignment, durability, static strength and corrosion resistance for sprung and unsprung lever handles and knobs for doors on backplates or roses.
This standard is applicable only to lever handles and knobs that operate a latch or a lock.
It states four categories of use according to the frequency and other conditions of use.
Compliance with this European Standard ensures a margin of strength in excess of that needed for normal operation. Additional requirements are needed for special safety furniture which is suitable for use in situations where there is a high risk of falling. Since special safety furniture is not essential in every situation, this European Standard provides for additional safety requirements (see 5.13) which are only necessary when the manufacturer states that the safety furniture is claimed to conform to these requirements.
This standard states five grades of security. Grade 0 according to requirements stated in the main part of this standard. Grades 1 to 4 are stated according to requirement for security lock furniture for use on burglary resistant doors (see annex A). These additional security requirements are necessary only when the manufacturer states that the products are claimed to have a high level of security, which is not essential in every situation.
The suitability of lock or latch furniture for use on fire/smoke door assemblies is determined by fire performance tests conducted in addition to the performance tests required by this standard. Since suitability for use on fire/smoke door assemblies is not essential in every situation, the manufacturer has the option of stating whether the furniture is claimed to conform to these additional requirements or not. If so stated the additional requirements given in annex C are necessary.

Schlösser und Baubeschläge - Türdrücker und Türknäufe -Anforderungen und Prüfverfahren

Diese Europäische Norm legt Prüfverfahren und Anforderungen an Drückerstifte und Befestigungsele-
mente, Betätigungsmomente, zulässiges freies Spiel und Sicherheit, freie Winkelbewegung und Verset-
zung, Dauerfunktion, statische Festigkeit und Korrosionsbeständigkeit von Türdrückern und Türknäufen
mit und ohne Hochhaltefeder auf Türschildern oder Türrosetten fest.
Diese Norm gilt nur für Türdrücker und Türknäufe, mit denen eine Falle oder ein Schloss betätigt wird.
Diese Norm enthält entsprechend der Betätigungsfrequenz und weiteren Bedingungen vier Anwen-
dungsklassen.
Diese Europäische Norm erfüllt die grundsätzlichen Anforderungen an die Sicherheit bei der Anwendung
und die Übereinstimmung mit dieser Norm und legt einen größeren Festigkeitsbereich fest, als er für nor-
male Zwecke benötigt wird. Für spezielle Sicherheitsbeschläge, die für Einsatzzwecke geeignet sind, bei
denen eine hohe Gefährdung durch Herunterfallen besteht, sind zusätzliche Anforderungen erforderlich.
Weil spezielle Sicherheitsbeschläge nicht für jede Anwendung notwendig sind, gibt diese Europäische
Norm zusätzliche Sicherheitsanforderungen (siehe 5.13), die aber nur dann erforderlich sind, wenn vom
Hersteller angegeben wird, dass die Sicherheitsbeschläge diese Anforderungen erfüllen müssen.
Diese Norm legt fünf Sicherheitsklassen fest. Klasse 0 richtet sich nach den im Hauptteil dieser Norm
festgelegten Anforderungen. Die Klassen 1 bis 4 sind nach den Anforderungen an Sicherheitsbeschläge
für einbruchhemmende Türen festgelegt (siehe Anhang A). Diese zusätzlichen Schutzanforderungen
sind nur dann notwendig, wenn der Hersteller angibt, dass die Produkte eine hohe Einbruchsicherheit
aufweisen müssen, die nicht in jedem Fall erforderlich ist.

Quincaillerie pour le bâtiment - Béquilles et boutons de porte - Prescriptions et méthodes d'essai

La présente Norme européenne spécifie les méthodes d'essai ainsi que les prescriptions pour les tiges carrées et les éléments de fixation, les couples opérationnels, le jeu autorisé et la sécurité, la rotation et le désaxage, l'endurance, la résistance statique et la résistance à la corrosion pour les dispositifs de porte à béquilles et boutons, avec ou sans ressort de rappel, sur plaques ou rosettes.
La présente norme s'applique uniquement aux béquilles et boutons de portes qui actionnent une serrure à pêne dormant ou une serrure bec de cane.
Elle établit quatre catégories d'utilisation selon la nature et la fréquence d'utilisation.
La conformité à cette norme assure une marge de résistance supérieure à celle requise pour une utilisation normale. Des prescriptions supplémentaires sont nécessaires pour des dispositifs de sécurité spéciaux destinés à être utilisés dans des situations où un risque majeur de chute existe. Etant donné qu'un dispositif de sécurité n'est pas nécessaire dans tous les cas, cette Norme européenne prévoit pour les prescriptions de sécurité additionnelles (voir 5.13) qu'elles soient obligatoires lorsque le fabricant stipule que le dispositif de sécurité est reconnu conforme à ces prescriptions.

Stavbno okovje - Kljuke in bunke - Zahteve in preskusne metode

General Information

• Status: Withdrawn
• Publication Date: 12-Feb-2002
• Withdrawal Date: 13-Apr-2010
• ICS: 91.190 - Building accessories
• Technical Committee: CEN/TC 33 - Doors, windows, shutters and building hardware
• Drafting Committee: CEN/TC 33/WG 4 - Building hardware
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 14-Apr-2010
• Completion Date: 14-Apr-2010
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/101 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on doors, windows and related products
• Ref Project: SIST EN 1906:2002 - Building hardware - Lever handles and knob furniture - Requirements and test methods

Relations

• Replaced By: EN 1906:2010 - Building hardware - Lever handles and knob furniture - Requirements and test methods
• Effective Date: 06-May-2009
• Revised: prEN 1906 - Building hardware - Lever handles and knob furniture - Requirements and test methods
• Effective Date: 18-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stavbno okovje - Kljuke in
bunke -
Zahteve in preskusne metodeSchlösser und Baubeschläge - Türdrücker und Türknäufe -Anforderungenund PrüfverfahrenQuincaillerie pour le bâtiment - Béquilles et boutons de porte - Prescriptions et méthodes d'essaiBuilding hardware - Lever handles and knob furniture - Requirements and test methods91.190Stavbna opremaBuilding accessoriesICS:Ta slovenski standard je istoveten z:EN 1906:2002SIST EN 1906:2002en01-julij-2002SIST EN 1906:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1906February 2002ICS 91.190English versionBuilding hardware - Lever handles and knob furniture -Requirements and test methodsQuincaillerie pour le bâtiment - Béquilles et boutons deporte - Prescriptions et méthodes d'essaiSchlösser und Baubeschläge - Türdrücker und Türknäufe -Anforderungen und PrüfverfahrenThis European Standard was approved by CEN on 4 November 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1906:2002 E

Requirements for security lock furniture for use on burglaryresistant doors.23Annex B (informative)
Test apparatus illustrations.29Annex C (normative)
Requirements for lock and latch furniture for use on fire/smokedoor assemblies.38Annex D (informative)
Flow charts of test procedures.39Bibliography.41

permits adaptation for differentthicknesses of doors, connects the lever handle or knob to the spindle and transmits imposed axialpulling forces to the opposite face of the door3.11floating spindling systemsystem in which the spindle is not attached to either of the lever handles or knobs of a lockset orlatchset but has additional fixing of the lever handles or knobs to the backplates or roses, whichallows the rotation of the follower of the lock or latch to withdraw the latchbolt and permits adaptationfor different thicknesses of doorsNOTEThis system does not transmit imposed axial pulling forces to the opposite face of the door.3.12half setsingle lever or knob attached to a plate or rose which allows operation of the lock or latch from oneside of the door only and usually supplied with a short length spindle fixed to the lever or knob3.13indicatordevice that is visible from the exterior of the door to indicate whether the door is locked or unlocked3.14internal platebackplate or rose that is fitted on the internal face of a door (see Figure 3)3.15latchplatebackplate adapted for use in conjunction with a latch and having no keyhole or cylinder aperture3.16lockplate – cylinderbackplate having a cylinder aperture for use in conjunction with a cylinder lock3.17lockplate – leverbackplate having a keyhole for use with a lever lock3.18plug protection plateplate whose function is to protect the cylinder plug and its components against violent attack3.19roseelement generally circular, but which may have equi-axed or approximately equi-axed shapes such assquare or octagonal, that otherwise has the same features as a backplate (see Figure 2)3.20security furnituredevice which provides added resistance to the lock and/or cylinder against physical attack3.21set of mortice latch furnituretwo door lever handles or knobs with two latchplates or roses and complete with a spindle andfastening elements
...