EN ISO 14574:2016

Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of tensile properties (ISO 14574:2013)

ISO 14574:2013 specifies the conditions for determination of tensile properties of ceramic matrix composite materials with continuous fibre reinforcement for temperatures up to 2 000 °C.
ISO 14574:2013 applies to all ceramic matrix composites with a continuous fibre reinforcement, unidirectional (1D), bi-directional (2D), and tri-directional (xD, with 2 < x ≤ 3), loaded along one principal axis of reinforcement.

Hochleistungskeramik - Mechanische Eigenschaften von keramischen Verbundwerkstoffen bei hoher Temperatur - Bestimmung der Eigenschaften unter Zug (ISO 14574:2013)

Diese Internationale Norm legt die Bedingungen zur Bestimmung der Eigenschaften von endlos-faserverstärkten keramischen Verbundwerkstoffen unter Zugbeanspruchung bei Temperaturen bis zu 2 000 °C fest.
ANMERKUNG 1   In den meisten Fällen sind die bei hoher Temperatur in Luft einzusetzenden Verbundwerkstoffe mit keramischer Matrix mit einer Deckschicht gegen Oxidation geschützt.
ANMERKUNG 2   Der Zweck dieser Internationalen Norm besteht darin, die Zugeigenschaften eines Werkstoffes in oxidierender Umgebung zu bestimmen, nicht aber die Oxidation des Werkstoffes zu messen.
Diese Internationale Norm gilt für alle endlosfaserverstärkten Verbundwerkstoffe mit keramischer Matrix mit unidirektionaler (1D), bidirektionaler (2D) und mehrdirektionaler (xD, mit 2 < x ≤ 3) Verstärkung mit der Beanspruchung längs zu einer der Hauptverstärkungsachsen.

Céramiques techniques - Propriétés mécaniques des céramiques composites à haute température - Détermination des caractéristiques en traction (ISO 14574:2013)

L'ISO 14574:2013 fixe les conditions de détermination des propriétés en traction des matériaux composites à matrice céramique et à renfort continu pour des températures allant jusqu'à 2 000 °C.
L'ISO 14574:2013 s'applique à tous les composites à matrice céramique à renfort continu, unidirectionnel (1D), bidirectionnel (2D), et tridirectionnel (xD, avec 2 < x ≤ 3) sollicités suivant un axe principal de renfort.

Fina keramika (sodobna keramika, sodobna tehnična keramika) - Mehanske lastnosti keramičnih kompozitov pri visoki temperaturi - Ugotavljanje nateznih lastnosti (ISO 14574:2013)

Ta mednarodni standard opredeljuje pogoje za določanje nateznih lastnosti keramičnih matričnih kompozitnih materialov pri temperaturah do 2000 °C. Ta mednarodni standard se uporablja za vse keramične matrične kompozitne materiale z neprekinjeno ojačitvijo vlaken, enosmerno (1D), dvosmerno (2D) in trismerno (xD, kjer je 2 < x ≤ 3), naloženih vzdolž ene glavne osi ojačitve.

General Information

• Status: Published
• Publication Date: 19-Apr-2016
• Withdrawal Date: 30-Oct-2016
• ICS: 81.060.30 - Advanced ceramics
• Technical Committee: CEN/TC 184 - Advanced technical ceramics
• Drafting Committee: CEN/TC 184/SC 1 - Ceramic composites
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 20-Apr-2016
• Due Date: 22-Nov-2016
• Completion Date: 20-Apr-2016
• Ref Project: SIST EN ISO 14574:2016 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of tensile properties (ISO 14574:2013)

Relations

• Replaces: EN 1893:2005 - Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of tensile properties
• Effective Date: 27-Apr-2016
• Replaces: EN 1892:2005 - Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of tensile properties
• Effective Date: 17-Dec-2014
• Revised: prEN ISO 14574 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of tensile properties (ISO/DIS 14574:2024)
• Effective Date: 19-Jan-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14574:2016
01-junij-2016
1DGRPHãþD
SIST EN 1892:2005
SIST EN 1893:2005
)LQDNHUDPLNDVRGREQDNHUDPLNDVRGREQDWHKQLþQDNHUDPLND0HKDQVNH
ODVWQRVWLNHUDPLþQLKNRPSR]LWRYSULYLVRNLWHPSHUDWXUL8JRWDYOMDQMHQDWH]QLK
ODVWQRVWL,62
Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical
properties of ceramic composites at high temperature - Determination of tensile
properties (ISO 14574:2013)
Hochleistungskeramik - Mechanische Eigenschaften von keramischen
Verbundwerkstoffen bei hoher Temperatur - Bestimmung der Eigenschaften unter Zug
(ISO 14574:2013)
Céramiques techniques - Propriétés mécaniques des céramiques composites à haute
température - Détermination des caractéristiques en traction (ISO 14574:2013)
Ta slovenski standard je istoveten z: EN ISO 14574:2016
ICS:
81.060.30 Sodobna keramika Advanced ceramics
SIST EN ISO 14574:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 14574:2016

---------------------- Page: 2 ----------------------

SIST EN ISO 14574:2016


EN ISO 14574
EUROPEAN STANDARD

NORME EUROPÉENNE

April 2016
EUROPÄISCHE NORM
ICS 81.060.30 Supersedes EN 1892:2005, EN 1893:2005
English Version

Fine ceramics (advanced ceramics, advanced technical
ceramics) - Mechanical properties of ceramic composites
at high temperature - Determination of tensile properties
(ISO 14574:2013)
Céramiques techniques - Propriétés mécaniques des Hochleistungskeramik - Mechanische Eigenschaften
céramiques composites à haute température - von keramischen Verbundwerkstoffen bei hoher
Détermination des caractéristiques en traction (ISO Temperatur - Bestimmung der Eigenschaften unter Zug
14574:2013) (ISO 14574:2013)
This European Standard was approved by CEN on 25 March 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14574:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 14574:2016
EN ISO 14574:2016 (E)
Contents Page
European foreword . 3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 14574:2016
EN ISO 14574:2016 (E)
European foreword
The text of ISO 14574:2013 has been prepared by Technical Committee ISO/TC 206 “Fine ceramics” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 14574:2016
by Technical Committee CEN/TC 184 “Advanced technical ceramics” the secretariat of which is held by
DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2016, and conflicting national standards shall
be withdrawn at the latest by October 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 1892:2005, EN 1893:2005.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Nethe
...