Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 5: Measured and elaborated data publications

This Technical Specification (CEN/TS 16157-5) specifies and defines component facets supporting the exchange and shared use of data and information in the field of traffic and travel.
The component facets include the framework and context for exchanges, the modelling approach, the data content, the data structure and relationships and the communications specification.
This Technical Specification is applicable to:
- Traffic and travel information which is of relevance to road networks (non urban and urban);
- Public transport information that is of direct relevance to the use of a road network (e.g. road link via train or ferry service).
This Technical Specification establishes specifications for data exchange between any two instances of the following actors:
- Traffic Information Centres (TICs);
- Traffic Control Centres (TCCs);
- Service Providers (SPs).
Use of this Technical Specification may be applicable for use by other actors.
This Technical Specification includes the following types of information content:
- Road traffic event information – planned and unplanned occurrences both on the road network and in the surrounding environment;
- Operator initiated actions;
- Road traffic measurement data, status data and travel time data;
- Travel information relevant to road users, including weather and environmental information;
- Road traffic management information and instructions relating to use of the road network.
This part of the CEN/TS 16157 series specifies the informational structures, relationships, roles, attributes and associated data types required for publishing measured and elaborated data within the Datex II framework. This is specified in three submodels, a DATEX II Measurement Site Table Publication submodel, a DATEX II Measured Data Publication submodel and a DATEX II Elaborated Data Publication submodel.

Intelligente Verkehrssysteme - DATEX II Datenaustauschspezifikationen für Verkehrsmanagement und Verkehrsinformation - Teil 5: Gemessene und ausgearbeitete Datenveröffentlichungen

Systèmes de transport intelligents - Spécifications Datex II d'échange de données pour la gestion du trafic et l'information routière - Partie 5 : Publication de données mesurées et de données calculées

Inteligentni transportni sistemi - Specifikacije za izmenjavo podatkov DATEX II pri upravljanju prometa in informiranju - 5. del: Merjeni in obdelani podatki za objavo

Tehnična specifikacija CEN/TS 16157-5 določa vidike v zvezi s komponentami, ki omogočajo izmenjavo in skupno uporabo podatkov in informacij na področju prometa in potovanj. Vidiki v zvezi s komponentami vključujejo ogrodje in kontekst za izmenjave, pristop z modeliranjem, vsebino podatkov, strukturo podatkov in odnose med njimi ter specifikacijo komunikacije. Ta tehnična specifikacija se uporablja za: - informacije o prometu in potovanju, ki so pomembne za cestna omrežja (na podeželju in v mestih); - informacije o javnem prevozu, ki so neposredno pomembne za uporabo cestnega omrežja (npr. cestna povezava prek železniške ali trajektne storitve). Ta tehnična specifikacija določa specifikacije za izmenjavo podatkov med katerima koli akterjema na naslednjem seznamu: - prometni informacijski centri; - prometni nadzorni centri; - ponudniki storitev. To tehnično specifikacijo lahko uporabijo tudi drugi akterji. Ta tehnična specifikacija vključuje naslednje vrste informacijske vsebine: - informacije o dogajanju v cestnem prometu - načrtovani ali nenačrtovani dogodki na cestnem omrežju in v njegovi okolici; - dejanja, ki jih izvedejo izvajalci; - podatki o merjenju cestnega prometa, podatki o stanju in času potovanja; - podatki o potovanju, ki so pomembni za uporabnike cest, vključno z informacijami o vremenu in okolju; - informacije o upravljanju cestnega prometa in navodila za uporabo cestnega omrežja. Ta del iz skupine tehničnih specifikacij CEN/TS 16157 določa strukture informacij, odnose, vloge, parametre in z njimi povezane podatkovne tipe, ki so potrebni za objavo merjenih in obdelanih podatkov v okviru Datex II. To je določeno v treh podmodelih: podmodelu DATEX II za objave tabel na merilnem mestu, podmodelu DATEX II za objave merjenih podatkov in podmodelu DATEX II za objave obdelanih podatkov.

General Information

Status
Withdrawn
Publication Date
29-Apr-2014
Withdrawal Date
04-Aug-2020
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
05-Aug-2020

Relations

Buy Standard

Technical specification
TS CEN/TS 16157-5:2014
English language
161 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2014
Inteligentni transportni sistemi - Specifikacije za izmenjavo podatkov DATEX II pri
upravljanju prometa in informiranju - 5. del: Merjeni in obdelani podatki za objavo
Intelligent transport systems - DATEX II data exchange specifications for traffic
management and information - Part 5: Measured and elaborated data publications
Intelligente Transportsysteme - DATEX II Datenaustausch Spezifikationen für
Verkehrsmanagement und Informationen - Teil 5: Gemessene und ausgearbeitete
Datenveröffentlichungen
Systèmes de transport intelligents - Spécifications Datex II d'échange de données pour
la gestion du trafic et l'information routière - Partie 5 : Publication de données mesurées
et de données calculées
Ta slovenski standard je istoveten z: CEN/TS 16157-5:2014
ICS:
35.240.60 Uporabniške rešitve IT v IT applications in transport
transportu in trgovini and trade
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

TECHNICAL SPECIFICATION
CEN/TS 16157-5
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
April 2014
ICS 35.240.60
English Version
Intelligent transport systems - DATEX II data exchange
specifications for traffic management and information - Part 5:
Measured and elaborated data publications
Systèmes de transport intelligents - Spécifications Datex II Intelligente Transportsysteme - DATEX II Datenaustausch
d'échange de données pour la gestion du trafic et Spezifikationen für Verkehrsmanagement und
l'information routière - Partie 5 : Publication de données Informationen - Teil 5: Gemessene und ausgearbeitete
mesurées et de données calculées Datenveröffentlichungen
This Technical Specification (CEN/TS) was approved by CEN on 27 January 2014 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 16157-5:2014 E
worldwide for CEN national Members.

Contents Page
Foreword .4
Introduction .5
1 Scope .6
1.1 Conformance .6
2 Normative references .7
3 Terms and definitions .7
4 Symbols and abbreviated terms .8
5 UML notation .8
6 The Measurement Site Table Publication model .8
6.1 Overview of the Measurement Site Table Publication model .8
6.2 The “MeasurementSiteTablePublication” Package .8
7 The Measured Data Publication model . 11
7.1 Overview of the Measured Data Publication model . 11
7.2 The “MeasuredDataPublication” Package . 11
7.3 The “BasicData” Package . 14
7.4 The “TrafficStatus” Package . 16
7.5 The “TravelTimeData” Package . 18
7.6 The “TrafficData” Package . 19
7.7 The “TrafficHeadway” Package . 21
7.8 The “TrafficFlow” Package . 23
7.9 The “TrafficSpeed” Package . 24
7.10 The “TrafficConcentration” Package . 26
7.11 The “IndividualDataValues” Package . 27
7.12 The “WeatherData” Package . 29
7.13 The “Humidity” Package . 32
7.14 The “Visibility” Package . 33
7.15 The “Pollution” Package . 34
7.16 The “PrecipitationDetail” Package. 35
7.17 The “RoadsurfaceConditionMeasurements” Package . 36
7.18 The “Temperature” Package . 38
7.19 The “Wind” Package . 39
8 The Elaborated Data Publication model . 41
8.1 Overview of the Elaborated Data Publication model . 41
8.2 The “ElaboratedDataPublication” Package . 41
8.3 The “ElaboratedData” Package . 43
8.4 The “Validity” Package . 45
8.5 The “BasicData” Package . 45
Annex A (normative) Data Dictionary. 46
A.2 Data Dictionary for “Measurement Site Table Publication” . 47
A.3 Data Dictionary of < < datatypes > > for “Measurement Site Table Publication” . 49
A.4 Data Dictionary of < < enumerations > > for “Measurement Site Table Publication” . 49
A.5 Data Dictionary for “Measured Data Publication” . 51
A.6 Data Dictionary of < < datatypes > > for “Measured Data Publication” . 66
A.7 Data Dictionary of < < enumerations > > for “Measured Data Publication” . 66
A.8 Data Dictionary for “Elaborated Data Publication” . 71
A.9 Data Dictionary of < < datatypes > > for “Elaborated Data Publication” . 74
Annex B (normative) Referenced XML Schema for “MeasurementSiteTablePublication” . 75
B.1 Overview . 75
B.2 Schema . 75
Annex C (normative) Referenced XML Schema for “MeasuredDataPublication” . 88
C.1 Overview . 88
C.2 Schema . 88
Annex D (normative) Referenced XML Schema for “ElaboratedDataPublication” . 118
D.1 Overview . 118
D.2 Schema . 118
Annex E (informative) Examples of Measurement Site Table Publications, Measured Data

Publications and Elaborated Data Publications in XML . 151
E.1 Example of Measurement Site Table Publication . 151
E.2 Example of Measured Data Publication . 154
E.3 Example of Elaborated Data Publication . 159
Bibliography . 161

Foreword
This document (CEN/TS 16157-5:2014) has been prepared by Technical Committee CEN/TC 278 “Intelligent
transport systems”, the secretariat of which is held by NEN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
The CEN/TS 16157 series consists of the following parts, under the general title “Intelligent transport systems
— DATEX II data exchange specifications for traffic management and information”:
- Part 1: Context and framework
- Part 2: Location referencing
- Part 3: Situation publication
- Part 4: VMS publication
- Part 5: Measured and Elaborated Data Publications
Other parts may be developed in the future.
As a user of the standard, attention is drawn to the resources of www.datex2.eu < http://www.datex2.eu/ > .
This website contains related software tools and software resources that aid the implementation of the
CEN/TS 16157 series DATEX II.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

Introduction
This Technical Specification defines a common set of data exchange specifications to support the vision of a
seamless interoperable exchange of traffic and travel information across boundaries, including national,
urban, interurban, road administrations, infrastructure providers and service providers. Standardization in this
context is a vital constituent to ensure that interoperability, reduction of risk, reduction of the cost base and
promotion of open marketplace objectives are achieved that will lead to many social, economic and
community benefits as a result of more informed travellers, network managers and transport operators.
Delivering European Transport Policy in line with the White Paper issued by the European Commission
requires co-ordination of traffic management and the development of seamless pan European services. With
the aim to support sustainable mobility in Europe, the European Commission has been supporting the
development of information exchange
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.