Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 3: Electrographic tests for porosity (ISO 4524-3:2021)

This document specifies four electrographic tests for assessing the porosity of electrodeposited gold and gold alloy coatings for engineering, and decorative and protective purposes.

Metallische Überzüge - Prüfverfahren für elektrolytisch abgeschiedene Überzüge aus Gold und Goldlegierungen - Teil 3: Elektrografische Prüfungen (ISO 4524-3:2021)

Dieses Dokument legt vier elektrographische Prüfungen zur Beurteilung der Porosität galvanisch ab-geschiedener Überzüge aus Gold und Goldlegierungen für technische, dekorative und schützende Anwendungen fest.

Revêtements métalliques - Méthodes d'essai des dépôts électrolytiques d'or et d'alliages d'or - Partie 3: Détermination électrographique de la porosité (ISO 4524-3:2021)

Le présent document décrit quatre essais électrographiques pour déterminer la porosité des dépôts électrolytiques d’or et d’alliages d’or pour utilisation dans l’industrie, la décoration et la protection.

Kovinske prevleke - Preskusne metode za galvansko nanašanje zlata in njegovih zlitin - 3. del: Elektrografsko ugotavljanje poroznosti (ISO 4524-3:2021)

Ta dokument določa:
– mere ter mehanske, hidravlične in akustične značilnosti, ki jim naj ustrezajo regulatorji pretoka za sanitarne armature (z regulacijo pretoka in brez nje);
– postopke za preskušanje teh značilnosti.
Ta dokument se uporablja za:
– regulatorje pretoka za sanitarne armature, namenjene za namestitev na armature, ki se uporabljajo s sanitarnimi napravami v straniščih, kopalnicah in kuhinjah (npr. enojne pipe, kombinirane pipe, mehanski mešalni ventili, termostatski mešalni ventili);
– regulatorje pretoka za sanitarne armature, ki se uporabljajo v naslednjih tlačnih in temperaturnih pogojih:
Opomba 1: Regulatorje pretoka za sanitarne armature je mogoče priključiti samo za tesnilom sanitarne armature.
Opomba 2: Zaradi jedrnatosti se v preostalem delu tega dokumenta namesto izraza regulatorji pretoka za sanitarne armature uporablja samo izraz regulatorji pretoka.
Opomba 3: Preskusi, opisani v tem dokumentu, so tipski preskusi (laboratorijski preskusi) in ne kontrolni preskusi kakovosti, opravljeni med proizvodnjo.

General Information

Status
Published
Publication Date
02-Nov-2021
Withdrawal Date
30-May-2022
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
03-Nov-2021
Completion Date
03-Nov-2021

Relations

Buy Standard

Standard
EN ISO 4524-3:2022
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2022
Nadomešča:
SIST EN ISO 4524-3:1999
Kovinske prevleke - Preskusne metode za galvansko nanašanje zlata in njegovih
zlitin - 3. del: Elektrografsko ugotavljanje poroznosti (ISO 4524-3:2021)
Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part
3: Electrographic tests for porosity (ISO 4524-3:2021)
Metallische Überzüge - Prüfverfahren für elektrolytisch abgeschiedene Überzüge aus
Gold und Goldlegierungen - Teil 3: Elektrografische Prüfungen (ISO 4524-3:2021)
Revêtements métalliques - Méthodes d'essai des dépôts électrolytiques d'or et d'alliages
d'or - Partie 3: Détermination électrographique de la porosité (ISO 4524-3:2021)
Ta slovenski standard je istoveten z: EN ISO 4524-3:2021
ICS:
25.220.40 Kovinske prevleke Metallic coatings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 4524-3
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2021
EUROPÄISCHE NORM
ICS 25.220.40 Supersedes EN ISO 4524-3:1995
English Version
Metallic coatings - Test methods for electrodeposited gold
and gold alloy coatings - Part 3: Electrographic tests for
porosity (ISO 4524-3:2021)
Revêtements métalliques - Méthodes d'essai des Metallische Überzüge - Prüfverfahren für elektrolytisch
dépôts électrolytiques d'or et d'alliages d'or - Partie 3: abgeschiedene Überzüge aus Gold und
Détermination électrographique de la porosité (ISO Goldlegierungen - Teil 3: Elektrografische Prüfungen
4524-3:2021) (ISO 4524-3:2021)
This European Standard was approved by CEN on 22 September 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4524-3:2021 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 4524-3:2021) has been prepared by Technical Committee ISO/TC 107 "Metallic
and other inorganic coatings" in collaboration with Technical Committee CEN/TC 262 “Metallic and
other inorganic coatings, including for corrosion protection and corrosion testing of metals and alloys”
the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2022, and conflicting national standards shall be
withdrawn at the latest by May 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 4524-3:1995.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 4524-3:2021 has been approved by CEN as EN ISO 4524-3:2021 without any
modification.
INTERNATIONAL ISO
STANDARD 4524-3
Second edition
2021-10
Metallic coatings — Test methods for
electrodeposited gold and gold alloy
coatings —
Part 3:
Electrographic tests for porosity
Revêtements métalliques — Méthodes d'essai des dépôts
électrolytiques d'or et d'alliages d'or —
Partie 3: Détermination électrographique de la porosité
Reference number
ISO 4524-3:2021(E)
ISO 4524-3:2021(E)
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 4524-3:2021(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Nioxime paper test .1
4.1 Applicability . 1
4.2 Materials . 1
4.2.1 General . 1
4.2.2 Nioxime paper . 1
4.2.3 Moistened blotting paper . 1
4.3 Procedure . 2
5 Dye-transfer paper test 1 . 2
5.1 Applicability . 2
5.2 Materials . 2
5.2.1 General . 2
5.2.2 Dye-transfer paper . 2
5.3 Procedure . 2
6 Dye-transfer paper test 2 . 3
7 Electrographic gelatine film test .3
7.1 Principle . 3
7.2 Reagents . 3
7.2.1 Gelatine . 3
7.2.2 Electrolyte solution. 3
7.2.3 Dimethylglyoxime, indicator solution . 4
7.3 Testing solution . 4
7.4 Apparatus . 4
7.5 Procedure . 4
7.5.1 Electrolytic process . 4
7.5.2 Drying . 4
7.5.3 Evaluation . 4
7.6 Expression of results . 5
8 Test report . 5
iii
ISO 4524-3:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the conv
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.