EN ISO 1461:2022
(Main)Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2022)
Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2022)
This document specifies the general properties of hot dip galvanized coatings and test methods for hot dip galvanized coatings applied by dipping fabricated iron and steel articles (including certain castings) in a zinc melt (containing not more than 2 % of other metals). This document does not apply to the following:
a) sheet, wire and woven or welded mesh products that are continuously hot dip galvanized;
b) tube and pipe that are hot dip galvanized in automatic plants;
c) hot dip galvanized products (e.g. fasteners) for which specific standards exist and which can include additional requirements or requirements which are different from those of this document.
NOTE Individual product standards can incorporate this document for the galvanized coating by quoting its number, or can incorporate it with modifications specific to the product. Different requirements can also be made for galvanized coatings on products intended to meet specific regulatory requirements.
This document does not apply to after-treatment or additional coating of hot dip galvanized articles.
Durch Feuerverzinken auf Stahl aufgebrachte Zinküberzüge (Stückverzinken) - Anforderungen und Prüfungen (ISO 1461:2022)
Dieses Dokument legt die allgemeinen Anforderungen an die Eigenschaften und Prüfungen von Feuerverzinkungsüberzügen fest, die durch Eintauchen von gefertigten Eisen und Stahlbauteilen (einschließlich bestimmter Gussteile) in eine Zinkschmelze (die nicht mehr als 2 % andere Metalle enthält) aufgebracht werden. Dieses Dokument ist nicht anzuwenden für:
a) Band, Draht und gewebte und geschweißte Metallprodukte, die kontinuierlich feuerverzinkt sind;
b) Rohre, die in automatischen Anlagen feuerverzinkt werden;
c) feuerverzinkte Produkte (z. B. Verbindungselemente), für die spezifische Normen existieren und die zusätzliche Anforderungen oder Anforderungen, die von diesem Dokument abweichen, enthalten können.
ANMERKUNG Eigenständige Produktnormen können für Zinküberzüge Bezug auf dieses Dokument nehmen indem sie es zitieren und es einschließen, oder sie können es mit Änderungen, die sich auf das genormte Produkt beziehen, übernehmen. Abweichende Anforderungen können an Zinküberzüge auf Produkten gestellt werden, die besonderen behördlichen Anforderungen unterliegen.
Dieses Dokument ist nicht anzuwenden für die Nachbehandlung oder zusätzliche Beschichtung von feuerverzinkten Bauteilen.
Revêtements par galvanisation à chaud sur produits finis en fonte et en acier - Spécifications et méthodes d'essai (ISO 1461:2022)
Le présent document spécifie les propriétés générales des revêtements de galvanisation à chaud et les méthodes d’essais relatives aux revêtements de galvanisation à chaud appliqués par immersion de pièces en fonte ou acier (y compris certaines pièces moulées) dans un bain de zinc (ne contenant pas plus de 2 % d’autres métaux). Le présent document ne s’applique pas :
a) aux tôles, aux fils et produits en treillis tissés ou soudés, galvanisés à chaud en continu ;
b) aux tubes et canalisations galvanisés à chaud dans des installations automatisées ;
c) aux produits galvanisés à chaud (par exemple les éléments de fixation) pour lesquels des normes spécifiques existent pouvant inclure des exigences supplémentaires ou différentes par rapport à celles contenues dans le présent document.
NOTE Les normes de produits peuvent incorporer le présent document relatif aux revêtements de galvanisation en citant son numéro ou en y ajoutant des modifications spécifiques au produit. Des exigences différentes peuvent également être énoncées pour la galvanisation de produits conçus pour répondre à des exigences réglementaires spécifiques.
Le présent document ne s’applique pas aux post-traitements ou aux revêtements supplémentaires sur pièces galvanisées à chaud.
Prevleke na železnih in jeklenih predmetih, nanesene z vročim pocinkanjem - Specifikacije in metode preskušanja (ISO 1461:2022)
Ta dokument določa splošne lastnosti prevlek, nanesenih z vročim pocinkanjem, in preskusne metode za vroče pocinkane prevleke, nanesene s potapljanjem izdelkov iz železa in jekla (vključno z določenimi ulitki) v cinkovo talino (ki ne vsebuje več kot 2 % drugih kovin). Ta dokument se ne uporablja za: a) izdelke iz pločevine, žice in spletene ali varjene mreže, ki so neprekinjeno vroče cinkani; b) cevi, ki jih vroče cinkajo v avtomatskih obratih; c) vroče cinkane izdelke (npr. pritrdilne elemente), za katere obstajajo posebni standardi z dodatnimi zahtevami ali zahtevami, ki se razlikujejo od zahtev v tem dokumentu. OPOMBA: V posameznih standardih za izdelke se lahko ta dokument uporabi za cinkane prevleke z navedbo številke dokumenta ali pa s spremembami, prilagojenimi posameznemu izdelku. Za cinkane prevleke na izdelkih, ki morajo izpolnjevati posebne regulativne zahteve, se lahko predpišejo tudi drugačne zahteve. Ta dokument se ne uporablja za naknadno obdelavo ali nanos dodatnih prevlek na vroče cinkane izdelke.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 1461:2022
01-november-2022
Nadomešča:
SIST EN ISO 1461:2009
Prevleke na železnih in jeklenih predmetih, nanesene z vročim pocinkanjem -
Specifikacije in metode preskušanja (ISO 1461:2022)
Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test
methods (ISO 1461:2022)
Durch Feuerverzinken auf Stahl aufgebrachte Zinküberzüge (Stückverzinken) -
Anforderungen und Prüfungen (ISO 1461:2022)
Revêtements par galvanisation à chaud sur produits finis en fonte et en acier -
Spécifications et méthodes d'essai (ISO 1461:2022)
Ta slovenski standard je istoveten z: EN ISO 1461:2022
ICS:
25.220.40 Kovinske prevleke Metallic coatings
SIST EN ISO 1461:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 1461:2022
---------------------- Page: 2 ----------------------
SIST EN ISO 1461:2022
EN ISO 1461
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2022
EUROPÄISCHE NORM
ICS 25.220.40 Supersedes EN ISO 1461:2009
English Version
Hot dip galvanized coatings on fabricated iron and steel
articles - Specifications and test methods (ISO 1461:2022)
Revêtements par galvanisation à chaud sur produits Durch Feuerverzinken auf Stahl aufgebrachte
finis en fonte et en acier - Spécifications et méthodes Zinküberzüge (Stückverzinken) - Anforderungen und
d'essai (ISO 1461:2022) Prüfungen (ISO 1461:2022)
This European Standard was approved by CEN on 15 September 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1461:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 1461:2022
EN ISO 1461:2022 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 1461:2022
EN ISO 1461:2022 (E)
European foreword
This document (EN ISO 1461:2022) has been prepared by Technical Committee ISO/TC 107 "Metallic
and other inorganic coatings" in collaboration with Technical Committee CEN/TC 262 “Metallic and
other inorganic coatings, including for corrosion protection and corrosion testing of metals and alloys”
the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2023, and conflicting national standards shall
be withdrawn at the latest by March 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 1461:2009.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.