EN ISO 10960:1996

Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:1994)

Specifies a method of assessing the resistance of hoses to the deleterious effects of atmospheric ozone under dynamic conditions. Applicable to hoses with bore diameters up to and including 25 mm.

Gummi- und Kunststoffschläuche - Beurteilung der Ozonbeständigkeit unter dynamischen Bedingungen (ISO 10960:1994)

Diese Internationale Norm legt ein Verfahren zur Beurteilung der Beständigkeit von Schläuchen gegen Beeinträchtigungen durch atmosphärisches Ozon unter dynamischen Bedingungen fest. Es gilt für Schläuche mit Innendurchmessern bis einschließlich 25 mm.

Tuyaux en caoutchouc et en plastique - Evaluation de la résistance à l'ozone dans des conditions dynamiques (ISO 10960:1994)

La présente Norme internationale prescrit une méthode pour l'évaluation de la résistance des tuyaux aux effets délétères de l'ozone atmosphérique, dans des conditions dynamiques. La méthode est applicable aux tuyaux ayant un diamètre intérieur inférieur ou égal à 25 mm.

Gumene ali polimerne cevi - Ocena odpornosti proti ozonu pri dinamičnih pogojih (ISO 10960:1994)

General Information

• Status: Withdrawn
• Publication Date: 20-Aug-1996
• Withdrawal Date: 06-Feb-2018
• ICS: 23.040.70 - Hoses and hose assemblies
• Technical Committee: CEN/TC 218 - Rubber and plastics hoses and hose assemblies
• Drafting Committee: CEN/TC 218/WG 4 - Basic specifications and test methods for rubber and plastics hoses, hose assemblies and tubing
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 07-Feb-2018
• Ref Project: SIST EN ISO 10960:2000 - Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:1994)

Relations

• Replaced By: EN ISO 10960:2018 - Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:2017)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10960:2000
01-december-2000
*XPHQHDOLSROLPHUQHFHYL2FHQDRGSRUQRVWLSURWLR]RQXSULGLQDPLþQLKSRJRMLK
,62
Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions
(ISO 10960:1994)
Gummi- und Kunststoffschläuche - Beurteilung der Ozonbeständigkeit unter
dynamischen Bedingungen (ISO 10960:1994)
Tuyaux en caoutchouc et en plastique - Evaluation de la résistance a l'ozone dans des
conditions dynamiques (ISO 10960:1994)
Ta slovenski standard je istoveten z: EN ISO 10960:1996
ICS:
23.040.70 Gumene cevi in armature Hoses and hose assemblies
SIST EN ISO 10960:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10960:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 10960:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 10960:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 10960:2000
ISO
INTERNATIONAL
STANDARD 10960
First edition
1994-12-01
Rubber and plastics hoses 7 Assessment
of ozone resistance under dynamic
conditions
Tuyaux en caoutchouc et en plastique - t%aluation de Ia r&istance a
I’ozone dans des conditions dynamiques
Reference number
ISO 10960:1994(E)

---------------------- Page: 5 ----------------------

SIST EN ISO 10960:2000
ISO 10960:1994(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft international Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 10960 was prepared by Technical Committee
ISOnC 45, Rubber and rubber products, Subcommittee SC 1, Hoses
(rubber and plastics).
0 ISO 1994
All rights reserved. Unless otherwise specified, no part of this publication mag/ be reproduced
or utilized in a and
ny form or by any means, electronie or mechanical, rncluding photocopyrng
microfilm, wit hout permisse on In writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-121 1 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 6 ----------------------

SIST EN ISO 10960:2000
ISO 10960:1994(E)
INTERNATIONAL STANDARD 0 ISO
- Assessment of ozone
Rubber and plastics hoses
resistance under dynamic conditions
4 Apparatus
1 Scope
This International Standard specifies a method of as-
4.1 Ozone cabinet, with apparatus for generating
sessing the resistance of hoses to the deleterious ef-
ozone and monitoring and controlling the ozone con-
fects of atmospheric ozone under dynamic conditions.
centration as described in ISO 1431-1.
lt is applicable to hoses with bore diameters up to and
including 25 mm.
4.2 Test piece holder, as shown in figure 1, with
means of carrying out flexing at the required fre-
quency.
Details given in ISO 1431-1 :1989, subclause 5.6, shall
2 Normative references
be followed.
The following Standards contain provisions which,
All apparatus placed in the test cabinet shall be made
through reference in this text, constitute provisions
from materials which do not absorb or decompose
of this International Standard. At the time of publica-
ozone.
tion, the editions indicated were valid. All Standards
are subject to revision, and Parties to agreements
5 Test pieces
based on this International Standard are encouraged
to investigate the possibility of applying the most re-
cent editions of the Standards indicated below.
5.1 Type of test piece
Members of IEC and ISO maintain registers of cur-
rently valid International Standards.
The test piece shall consist of a hose Sample with a
free length L calculated from the formula
ISO 471 :--J, Rubber - Times, temperatures and hu-
midities for conditioning and testing.
L=20xd
where d is the outside diameter of the hose under
ISO 1431-1: 1989, Rubber, vulcanized or thermoplastic
test.
- ßesistance to ozone cracking - Part 7: Static
s train tes t.
5.2 Numbea of test pieces
Two test pieces shall be tested.
3 Principle
6 Conditioning of test pieces
The cover of a hose in a crescent Position during re-
No test shail be carried out within 24 h of
...