EN 14420-7:2004+A1:2007
(Main)Hose fittings with clamp units - Part 7: Cam locking couplings
Hose fittings with clamp units - Part 7: Cam locking couplings
This document details the design, materials and dimensions for cam locking couplings that serve as the link between hoses and connections to transport liquids, solids and gases, except liquid gas and steam. The couplings are capable of operating the pressure range - 0,8 bar to 25 bar working pressure in a working temperature range of - 20 °C up to + 65 °C.
WARNING - Line pressure shall be reduced before disconnection.
Schlaucharmaturen mit Klemmfassungen - Teil 7: Hebelarmkupplungen
Diese Europäische Norm legt die Konstruktion, Werkstoffe und Maße für Hebelarmkupplungen fest, die der Verbindung von Schläuchen mit Anschlüssen zum Fördern von Flüssigkeiten, Feststoffen und Gasen, ausgenommen Flüssiggas und Dampf, dienen. Die Kupplungen müssen in einem Druckbereich von 0,8 bar bis !16"bar Arbeitsdruck in einem Arbeitstemperaturbereich von 20 °C bis + 65 °C verwendet werden können.
WARNHINWEIS Vor dem Entkuppeln muss der Druck in der Leitung reduziert werden.
Raccords pour flexibles avec demi-coquille - Partie 7: Raccords à cames
Le présent document décrit la conception, les matériaux et les dimensions des accouplements à cames destinés à relier les tuyauteries flexibles aux raccordements de transport de liquides, de matières solides et de gaz, à l'exception des gaz liquéfiés et de la vapeur. Les accouplements sont utilisables dans une plage de pression de service de - 0,8 bar à 25 bar pour des températures de service de - 20 °C à + 65 °C.
AVERTISSEMENT - Avant déconnexion, la pression de la canalisation doit être détendue.
Cevni fitingi z objemkami - 7. del: Spojke z vzvodno ročico
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schlaucharmaturen mit Klemmfassungen - Teil 7: HebelarmkupplungenRaccords pour flexibles avec demi-coquille - Partie 7: Raccords a camesHose fittings with clamp units - Part 7: Cam locking couplings23.040.60Prirobnice, oglavki in spojni elementiFlanges, couplings and jointsICS:Ta slovenski standard je istoveten z:EN 14420-7:2004+A1:2007SIST EN 14420-7:2005+A1:2007en,fr,de01-september-2007SIST EN 14420-7:2005+A1:2007SLOVENSKI
STANDARD
SIST EN 14420-7:2005+A1:2007
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14420-7:2004+A1
January 2007 ICS 23.040.70 Supersedes EN 14420-7:2004English Version
Hose fittings with clamp units - Part 7: Cam locking couplings
Raccords pour flexibles avec demi-coquille - Partie 7: Raccords à cames
Schlaucharmaturen mit Klemmfassungen - Teil 7: Hebelarmkupplungen This European Standard was approved by CEN on 30 September 2004 and includes Amendment 1 approved by CEN on 13 December 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14420-7:2004+A1:2007: ESIST EN 14420-7:2005+A1:2007
EN 14420-7:2004+A1:2007 (E) 2 Contents page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Requirements.5 3.1 Construction.5 3.2 Temperatures.6 4 Survey.6 5 Types of connection, survey.8 6 Designation.9 7 Dimensions.9 7.1 General.9 7.2 Coupler types.9 7.3 Cam arm (item No 2).12 7.4 Pin (item No 3).13 7.5 Ring (item No 4).14 7.6 Main gasket (item No 5).
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.