prEN 13776
(Main)LPG equipment and accessories - Filling and discharge procedures for LPG road tankers
LPG equipment and accessories - Filling and discharge procedures for LPG road tankers
This document specifies filling, discharge and emergency procedures for road tankers equipped in accordance with EN 12252 used for the transport of liquefied petroleum gas (LPG).
This document does not apply to "batteries of receptacles".
Flüssiggas-Geräte und Ausrüstungsteile - Füll- und Entleerungsverfahren für Straßentankfahrzeuge für Flüssiggas (LPG)
Dieses Dokument legt Befüllungs-, Entleerungs- und Notfallverfahren für nach EN 12252 ausgestattete Straßentankfahrzeuge fest, die für die Beförderung von Flüssiggas (LPG, en: liquefied petroleum gas) verwendet werden.
Dieses Dokument gilt nicht für "Behälterbatterien".
Équipements et accessoires pour GPL - Procédures de chargement et déchargement des camions-citernes pour GPL
Le présent document spécifie les procédures de chargement, de déchargement et d'urgence pour les camions-citernes équipés conformément à l'EN 12252 et utilisés pour le transport du gaz de pétrole liquéfié (GPL).
Il ne s'applique pas aux « véhicules-batteries ».
Oprema in pribor za utekočinjeni naftni plin (UNP) - Postopek polnjenja in praznjenja cestnih cistern za UNP
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 13776:2022
01-marec-2022
Oprema in pribor za utekočinjeni naftni plin (UNP) - Postopek polnjenja in
praznjenja cestnih cistern za utekočinjeni naftni plin (UNP)
LPG equipment and accessories - Filling and discharge procedures for LPG road tankers
Flüssiggas-Geräte und Ausrüstungsteile - Füll- und Entleerungsverfahren fürStraßentankfahrzeuge für Flüssiggas (LPG)
Équipements et accessoires pour GPL - Procédures de chargement et déchargement
des camions-citernes pour GPL
Ta slovenski standard je istoveten z: prEN 13776
ICS:
23.020.20 Posode in vsebniki, montirani Vessels and containers
na vozila mounted on vehicles
43.080.10 Tovornjaki in priklopniki Trucks and trailers
oSIST prEN 13776:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN 13776:2022
---------------------- Page: 2 ----------------------
oSIST prEN 13776:2022
DRAFT
EUROPEAN STANDARD
prEN 13776
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2022
ICS 43.080.10 Will supersede EN 13776:2013
English Version
LPG equipment and accessories - Filling and discharge
procedures for LPG road tankers
Équipements et accessoires pour GPL - Procédures de Flüssiggas-Geräte und Ausrüstungsteile - Füll- und
chargement et déchargement des camions-citernes Entleerungsverfahren für Straßentankfahrzeuge für
pour GPL Flüssiggas (LPG)This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 286.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13776:2022 E
worldwide for CEN national Members.---------------------- Page: 3 ----------------------
oSIST prEN 13776:2022
prEN 13776:2022 (E)
Contents Page
European foreword ...................................................................................................................................................... 3
Introduction .................................................................................................................................................................... 4
1 Scope .................................................................................................................................................................... 5
2 Normative references .................................................................................................................................... 5
3 Terms and definitions ................................................................................................................................... 5
4 General................................................................................................................................................................ 5
5 Filling ................................................................................................................................................................... 6
5.1 Preparation for filling ................................................................................................................................... 6
5.2 Filling operations ............................................................................................................................................ 6
5.3 Completion of filling....................................................................................................................................... 7
5.4 Precautions against overfilling .................................................................................................................. 7
6 Discharge ........................................................................................................................................................... 7
6.1 Preparation for discharge............................................................................................................................ 7
6.2 Discharge operations .................................................................................................................................... 8
6.3 Completion of discharge ............................................................................................................................... 9
7 Emergency procedures ................................................................................................................................. 9
Annex A (informative) Safety recommendations ........................................................................................... 10
Bibliography ................................................................................................................................................................. 11
---------------------- Page: 4 ----------------------oSIST prEN 13776:2022
prEN 13776:2022 (E)
European foreword
This document (prEN 13776:2022) has been prepared by Technical Committee CEN/TC 286 “Liquefied
petroleum gas equipment and accessories”, the secretariat of which is held by NSAI.
This document is currently submitted to the CEN Enquiry.This document will supersede EN 13776:2013.
In comparison with the previous edition, the following technical modifications have been made:
— Removal of the previous Annex A giving a table of LPG mixtures;— A new Annex A was added giving recommendations on the personal protection equipment;
— Removal of the Annex B on the Environmental checklist, addition of a reference to CEN/TS 16765;
— Updating of the Introduction,— A requirement was added to Clause 5.1.3 that all electrical equipment required for the filling process
shall be suitable for the hazardous zone according to ATEX,— Both the filling and the discharge requirements were harmonized with the ones for rail tanker in
EN 14841;— References and clarifications concerning ADR [4] were added to improve clarity.
This document will be submitted for reference in— the RID and/or
— the technical annexes of the ADR [4].
NOTE These regulations take precedence over any clause of this document. It is emphasized that RID/ADR are
being revised regularly at intervals of two years which may lead to temporary non-compliances with the clauses of
this document.---------------------- Page: 5 ----------------------
oSIST prEN 13776:2022
prEN 13776:2021 (E)
Introduction
This document calls for the use of substances and procedures that can be injurious to health if adequate
precautions are not taken. It refers only to technical suitability and does not absolve the user from legal
obligations relating to health and safety at any stage.The frequencies of the different types of pressure vessel inspection are given by the relevant international
regulations concerning the transport of dangerous goods.Protection of the environment is a key political issue in Europe and elsewhere. For CEN/TC 286 this is
covered in CEN/TS 16765 [1], and this Technical Specification should be read in conjunction with this
document. CEN/TS 16765 provides guidance on the environmental aspects to be considered regarding
equipment and accessories produced for the LPG industry and the following is addressed:
a) design;b) manufacture;
c) packaging;
d) use and operation; and
e) disposal.
It is recommended that companies using this document develop an environmental management policy.
For guidance, see EN ISO 14001 [2].It has been assumed in the drafting of this document that the execution of its provisions is entrusted to
appropriately qualified and experienced people.All pressures are gauge pressures unless otherwise stated.
NOTE This document requires measurement of material properties, dimensions and pressures. All such
measurements are subject to a degree of uncertainty due to tolerances in measuring equipment etc. It might be
beneficial to refer to the leaflet “measurement uncertainty leaflet” SP INFO 2000 27 [3].
---------------------- Page: 6 ----------------------oSIST prEN 13776:2022
prEN 13776:2022 (E)
1 Scope
This document specifies filling, discharge and emergency procedures for road tankers equipped in
accordance with EN 12252 used for the transport of liquefied petroleum gas (LPG).
This document does not apply to “batteries of receptacles”.2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 12252, LPG equipment and accessories - Equipping of LPG road tankersCEN/TS 16769, LPG equipment and accessories - Terminology
3 Terms and definitions
For the purposes of this document, the terms of CEN/TS 16769 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp— IEC Electropedia: available at https://www.electropedia.org/
4 General
4.1 Safety systems as required by EN 12252 shall be used. Personnel carrying out LPG transfer
operations shall wear personal protection equipment according to applicable regulations.
Recommendations for personal protection equipment are given in Annex A. Filling and discharging shall
be under the constant supervision of a competent person.4.2 The filling and discharge areas shall be inspected for fire hazards prior to beginning operations.
Suitable fire protection shall be readily available.NOTE Responsibilities for fire protection are subject to national regulations.
4.3 Written procedures and other appropriate information shall be made readily available, understood
and followed by those undertaking filling and discharging procedures.NOTE ADR [4] requires drivers to have an ADR driver training certificate as given in part 8 of ADR.
Consideration shall be given to include specific instructions for the use of the road tanker’s LPG
equipment and fixed LPG installation relevant to the operations in the training programme. These
instructions shall be based on risk assessment and address all requirements of Clauses 5 and 6.
4.4 Written procedures shall be readily available, understood and followed. This shall be achieved by
training and supervision. The responsibilities of all persons involved in the operation shall be clearly
defined.----------------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.