Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets for roof waterproofing

This European Standard specifies methods for the determination of the thickness and the mass per unit area of plastic and rubber sheets for roof waterproofing.

Abdichtungsbahnen - Bestimmung der Dicke und der flächenbezogenen Masse - Teil 2: Kunststoff- und Elastomerbahnen für Dachabdichtungen

In der vorliegenden Europäischen Norm werden Verfahren zur Bestimmung der Dicke und des Flächengewichtes von Dach- und Dichtungsbahnen aus Kunststoff und Kautschuk festgelegt.

Feuilles souples d'étanchéité - Détermination de l'épaisseur et de la masse surfacique - Partie 2: Feuilles d'étanchéité de toiture plastiques et élastomères

La présente Norme européenne spécifie les méthodes permettant de déterminer l'épaisseur et la masse surfacique de feuilles plastiques et élastomères pour étanchéité de toiture.

Hidroizolacijski trakovi - Določevanje debeline in mase na enoto površine - 2.del: Polimerni in elastomerni trakovi za tesnjenje streh

General Information

Status
Withdrawn
Publication Date
15-May-2001
Withdrawal Date
08-Dec-2009
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
09-Dec-2009
Completion Date
09-Dec-2009

Relations

Buy Standard

Standard
EN 1849-2:2001
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Abdichtungsbahnen - Bestimmung der Dicke und der flächenbezogenen Masse - Teil 2: Kunststoff- und Elastomerbahnen für DachabdichtungenFeuilles souples d'étanchéité - Détermination de l'épaisseur et de la masse surfacique - Partie 2: Feuilles d'étanchéité de toiture plastiques et élastomeresFlexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets for roof waterproofing91.100.50Veziva. Tesnilni materialiBinders. Sealing materials91.060.20StreheRoofsICS:Ta slovenski standard je istoveten z:EN 1849-2:2001SIST EN 1849-2:2001en01-december-2001SIST EN 1849-2:2001SLOVENSKI
STANDARD



SIST EN 1849-2:2001



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1849-2May 2001ICS 91.100.50English versionFlexible sheets for waterproofing - Determination of thicknessand mass per unit area - Part 2: Plastic and rubber sheets forroof waterproofingFeuilles souples d'étanchéité - Détermination de l'épaisseuret de la masse surfacique - Partie 2: Feuilles d'étanchéitéde toiture plastiques et élastomèresAbdichtungsbahnen - Bestimmung der Dicke und derflächenbezogenen Masse - Teil 2: Kunststoff- undElastomerbahnen für DachabdichtungenThis European Standard was approved by CEN on 2 June 2000.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1849-2:2001 ESIST EN 1849-2:2001



Page 2EN 1849-2:2001ContentsPageForeword.3Introduction.31Scope.32Normative references.33Terms and Definitions.34Sampling.55Determination of thickness.56Determination of mass per unit area.77Precision of the test methods.78Test Report.7SIST EN 1849-2:2001



Page 3EN 1849-2:2001ForewordThis European Standard has been prepared by Technical Committee CEN/TC 254 "Flexible sheets forwaterproofing", the secretariat of which is held by BSI.This European Standard shall be given the status of a national standard, either by publication of anidentical text or by endorsement, at the latest by month of November 2001, and conflicting nationalstandards shall be withdrawn at the latest by month of July 2002.According to the CEN/CENELEC Internal Regulations, the national standards organizations of thefollowing countries are bound to implement this European Standard: Austria, Belgium, Czech Republic,Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands,Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.IntroductionThis European Standard is intended for characterisation of plastic and rubber sheets as manufactured orsupplied before use. This test method relates exclusively to products or to their components whereappropriate, and not to waterproofing membrane systems composed of such products and installed in theworks.This test is intended to be used in conjunction with European Standard
"Definition and Characteristics" forplastic and rubber sheets for roof waterproofing.1 ScopeThis European Standard specifies methods for the determination of the thickness and mass per unit area ofplastic and rubber sheets for roof waterproofing.2 Normative referencesThis European Standard incorporates by dated or undated reference provisions from other publications.These normative references are cited at the appropriate places in the text a
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.