EN ISO 20815:2010
(Main)Petroleum, petrochemical and natural gas industries - Production assurance and reliability management (ISO 20815:2008, Corrected version 2009-06-15)
Petroleum, petrochemical and natural gas industries - Production assurance and reliability management (ISO 20815:2008, Corrected version 2009-06-15)
ISO 20815:2008 introduces the concept of production assurance within the systems and operations associated with exploration drilling, exploitation, processing and transport of petroleum, petrochemical and natural gas resources. ISO 20815:2008 covers upstream (including subsea), midstream and downstream facilities and activities. It focuses on production assurance of oil and gas production, processing and associated activities and covers the analysis of reliability and maintenance of the components.
ISO 20815:2008 provides processes and activities, requirements and guidelines for systematic management, effective planning, execution and use of production assurance and reliability technology. This is to achieve cost-effective solutions over the life cycle of an asset-development project structured around the following main elements: production-assurance management for optimum economy of the facility through all of its life-cycle phases, while also considering constraints arising from health, safety, environment, quality and human factors; planning, execution and implementation of reliability technology; application of reliability and maintenance data; and reliability-based design and operation improvement.
For standards on equipment reliability and maintenance performance in general, see the IEC 60300-3 series.
ISO 20815:2008 designates 12 processes, of which seven are defined as core production-assurance processes and addressed in ISO 20815:2008. The remaining five processes are denoted as interacting processes and are outside the scope of ISO 20815:2008. The interaction of the core production-assurance processes with these interacting processes, however, is within the scope of ISO 20815:2008 as the information flow to and from these latter processes is required to ensure that production-assurance requirements can be fulfilled.
ISO 20815:2008 recommends that the listed processes and activities be initiated only if they can be considered to add value.
The only requirements mandated by ISO 20815:2008 are the establishment and execution of the production-assurance programme (PAP).
Erdöl-, petrochemische und Erdgasindustrie - Betriebsoptimierung und Zuverlässigkeitsmanagement (ISO 20815:2008, korrigierte Fassung 2009-06-15)
Industries du pétrole, de la pétrochimie et du gaz naturel - Assurance de la production et management de la fiabilité (ISO 20815:2008, Version corrigée 2009-06-15)
L'ISO 20815:2008 introduit le concept d'assurance production dans les systèmes et les opérations liés au forage, à l'exploitation, au traitement et au transport des ressources pétrolières, pétrochimiques et en gaz naturel. L'ISO 20815:2008 couvre les installations et les activités amont (y compris sous-marines), intermédiaires et aval. Elle est axée sur l'assurance production relative à la production du pétrole et du gaz, sur le traitement et les opérations associées et couvre l'analyse de la fiabilité et de la maintenance des composants.
Elle fournit des processus et des activités, des exigences et des lignes directrices pour la gestion systématique, la planification, l'exécution et l'utilisation efficaces de l'assurance production et des techniques fiabilistes. Le but en est d'obtenir des solutions rentables sur tout le cycle de vie d'un projet de développement d'une installation de production structurée autour des éléments principaux suivants: gestion de l'assurance production pour une économie optimale de l'installation durant toutes les phases de son cycle de vie, tout en tenant compte des contraintes résultant de facteurs liés à santé, à la sécurité, à l'environnement et à la qualité ainsi qu'aux facteurs humains; planification, exécution et mise en œuvre des techniques fiabilistes; application des données de fiabilité et de maintenance; et amélioration de la conception et de l'exploitation basée sur la fiabilité.
Pour les normes relatives à la fiabilité des équipements et à l'exécution de la maintenance, voir la série CEI 60300-3.
L'ISO 20815:2008 définie douze processus, dont sept sont définis comme des processus fondamentaux de l'assurance production et sont y abordés. Les cinq processus restants sont appelés processus en interaction et ne relèvent pas du domaine d'application de l'ISO 20815:2008. L'interaction des processus fondamentaux de l'assurance production avec ces processus interactifs s'inscrit toutefois dans le domaine d'application de la norme car le flux d'informations à destination et en provenance de ces derniers processus est requis pour s'assurer que les exigences de l'assurance production peuvent être remplies.
L'ISO 20815:2008 recommande de ne lancer les processus et activités qu'elle énumère que s'ils apportent de la valeur ajoutée.
Les seules exigences obligatoires stipulées par l'ISO 20815:2008 concernent l'établissement et l'exécution du programme d'assurance production (PAP).
Petrokemična industrija ter industrija za predelavo nafte in zemeljskega plina - Optimizacija proizvodnje in upravljanje zanesljivosti (ISO 20815:2008, popravljena verzija 2009-06-15)
Ta mednarodni standard vpeljuje koncept optimizacije proizvodnje znotraj sistemov in operacij, povezanih z raziskovalnim vrtanjem, izkoriščanjem, predelavo in prevozom naftnih, petrokemičnih in virov zemeljskega plina. Ta mednarodni standard zajema naprave in aktivnosti, ki se uporabljajo pred proizvodnjo (tudi pod vodo), med proizvodnjo ter kasneje. Usmerja se na optimizacijo proizvodnje nafte in zemeljskega plina, predelavo in povezane aktivnosti ter zajema analizo zanesljivosti in vzdrževanje komponent. Podaja postopke in aktivnosti, zahteve in smernice za sistematično upravljanje, učinkovito načrtovanje, izvedbo in uporabo optimizacije proizvodnje in tehnologije za zagotavljanje zanesljivosti. S tem se dosežejo stroškovno učinkovite rešitve v življenjski dobi sredstva - razvojnega projekta, ki je zasnovan okoli naslednjih glavnih elementov: upravljanja optimizacije proizvodnje za optimalno gospodarnost objekta skozi vse faze njegove življenjske dobe ob hkratnem upoštevanju omejitev, ki izhajajo iz zdravstvenih, varnostnih, okoljskih, kakovostnih in človeških dejavnikov; tehnologije za načrtovanja, izvedbe in uresničevanja zanesljivosti; uporabe podatkov o zanesljivosti in vzdrževanju; načrtovanja, zasnovanega na zanesljivosti in izboljševanju operacij. Za standarde o zanesljivosti opreme in splošnem delovanju vzdrževanja glej IEC 60300-3 serijo. Ta mednarodni standard opredeljuje 12 postopkov, od katerih jih je sedem definiranih kot osrednji postopki optimizacije proizvodnje ter so obravnavani v tem mednarodnem standardu. Ostalih pet postopkov je označenih kot vzajemno delujoči postopki ter so izven področja tega mednarodnega standarda. Vendar pa je vzajemno delovanje osrednjih postopkov optimizacije proizvodnje s temi vzajemno delujočimi postopki v okviru področja tega standarda, saj je pretok informacij v in iz teh slednjih postopkov potreben za zagotavljanje, da so lahko izpolnjene zahteve za optimizacijo proizvodnje. Ta mednarodni standard priporoča, da se našteti postopki in aktivnosti vpeljejo le, če se lahko šteje, da bodo dodali vrednost. Edine zahteve, ki jih nalaga ta mednarodni standard, so vzpostavitev in izvršitev programa optimizacije proizvodnje (PAP).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2010
1DGRPHãþD
SIST EN ISO 20815:2008
3HWURNHPLþQDLQGXVWULMDWHULQGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD
2SWLPL]DFLMDSURL]YRGQMHLQXSUDYOMDQMH]DQHVOMLYRVWL ,62 SRSUDYOMHQD
YHU]LMD
Petroleum, petrochemical and natural gas industries - Production assurance and
reliability management (ISO 20815:2008, Corrected version 2009-06-15)
Erdöl- und Erdgasindustrie - Betriebsoptimierung und Zuverlässigkeitsmanagement (ISO
20815:2008, korrigierte Fassung 2009-06-15)
Industries du pétrole, de la pétrochimie et du gaz naturel - Assurance de la production et
management de la fiabilité (ISO 20815:2008, Version corrigée 2009-06-15)
Ta slovenski standard je istoveten z: EN ISO 20815:2010
ICS:
75.180.01 Oprema za industrijo nafte in Equipment for petroleum and
zemeljskega plina na splošno natural gas industries in
general
75.200 2SUHPD]DVNODGLãþHQMH Petroleum products and
QDIWHQDIWQLKSURL]YRGRYLQ natural gas handling
]HPHOMVNHJDSOLQD equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 20815
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2010
ICS 75.180.01; 75.200 Supersedes EN ISO 20815:2008
English Version
Petroleum, petrochemical and natural gas industries -
Production assurance and reliability management (ISO
20815:2008, Corrected version 2009-06-15)
Industries du pétrole, de la pétrochimie et du gaz naturel - Erdöl-, petrochemische und Erdgasindustrie -
Assurance de la production et management de la fiabilité Betriebsoptimierung und Zuverlässigkeitsmanagement
(ISO 20815:2008, Version corrigée 2009-06-15) (ISO 20815:2008, korrigierte Fassung 2009-06-15)
This European Standard was approved by CEN on 16 February 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20815:2010: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
The text of ISO 20815:2008, Corrected version 2009-06-15 has been prepared by Technical Committee
ISO/TC 67 “Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries” of the International Organization for Standardization (ISO) and has been taken over as EN ISO
20815:2010 by Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2010, and conflicting national standards shall be
withdrawn at the latest by September 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 20815:2008.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 20815:2008, Corrected version 2009-06-15 has been approved by CEN as a EN ISO
20815:2010 without any modification.
INTERNATIONAL ISO
STANDARD 20815
First edition
2008-06-01
Corrected version
2009-06-15
Petroleum, petrochemical and natural gas
industries — Production assurance and
reliability management
Industries du pétrole, de la pétrochimie et du gaz naturel — Assurance
de la production et management de la fiabilité
Reference number
ISO 20815:2008(E)
©
ISO 2008
ISO 20815:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2008 – All rights reserved
ISO 20815:2008(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 2
3.1 Terms and definitions. 2
3.2 Abbreviations . 7
4 Production assurance and decision support . 8
4.1 Framework conditions. 8
4.2 Optimization process . 9
4.3 Production-assurance programme . 11
4.4 Alternative standards . 15
5 Production-assurance processes and activities . 15
Annex A (informative) Contents of production-assurance programme (PAP) . 17
Annex B (informative) Core production-assurance processes and activities . 19
Annex C (informative) Interacting production-assurance processes and activities. 26
Annex D (informative) Production-performance analyses. 30
Annex E (informative) Reliability and production-performance data . 34
Annex F (informative) Performance objectives and requirements . 36
Annex G (informative) Performance measures for production availability. 38
Annex H (informative) Catastrophic events. 47
Annex I (informative) Outline of techniques. 49
Bibliography . 64
ISO 20815:2008(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 20815 was prepared by Technical Committee ISO/TC 67, Materials, equipment and offshore structures
for petroleum, petrochemical and natural gas industries.
This corrected version of ISO 20815:2008 incorporates the following corrections:
⎯ 3.1.13 “(t + ∆t)” modified to “[t, (t + ∆t)]”;
⎯ 3.1.46, Equation (1) symbols and definitions modified;
⎯ Clause G.2, Equation (G.2) symbols and definitions modified.
iv © ISO 2008 – All rights reserved
ISO 20815:2008(E)
Introduction
The petroleum and natural gas industries involve large capital investment costs as well as operational
expenditures. The profitability of these industries is dependent upon the reliability, availability and
maintainability of the systems and components that are used. Therefore, for optimal production availability in
the oil and gas business, a standardized, integrated reliability approach is required.
The concept of production assurance, introduced in this International Standard, enables a common
understanding with respect to use of reliability technology in the various life-cycle phases and covers the
activities implemented to achieve and maintain a performance level that is at its optimum in terms of the
overall economy and, at the same time, consistent with applicable regulatory and framework conditions.
Annexes A through I are for information only.
INTERNATIONAL STANDARD ISO 20815:2008(E)
Petroleum, petrochemical and natural gas industries —
Production assurance and reliability management
1 Scope
This International Standard introduces the concept of production assurance within the systems and operations
associated with exploration drilling, exploitation, processing and transport of petroleum, petrochemical and
natural gas resources. This International Standard covers upstream (including subsea), midstream and
downstream facilities and activities. It focuses on production assurance of oil and gas production, processing
and associated activities and covers the analysis of reliability and maintenance of the components.
It provides processes and activities, requirements and guidelines for systematic management, effective
planning, execution and use of production assurance and reliability technology. This is to achieve cost-
effective solutions over the life cycle of an asset-development pro
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.