EN 1447:2009
(Main)Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure
This standard specifies a method for determining the time to failure of glass-reinforced thermosetting plastics (GRP) pipes under internal hydrostatic pressure at a specified temperature. The external environment can be air or water.
NOTE For other internal or external environments the referring standard should specify any additional requirement.
Kunststoff-Rohrleitungssysteme - Rohre aus glasfaserverstärkten duroplastischen Kunststoffen (GFK) - Bestimmung der Langzeit-Widerstandsfähigkeit gegen Innendruck
Diese Norm legt ein Verfahren zur Bestimmung der Versagenszeit von Rohren aus glasfaserverstärkten
duroplastischen Kunststoffen (GFK) unter hydrostatischem Innendruck bei einer festgelegten Temperatur fest.
Die äußere Umgebung kann Wasser oder Luft sein.
ANMERKUNG Für andere innere oder äußere Umgebungsbedingungen sollte die bezugnehmende Norm zusätzliche
Anforderungen enthalten.
Systèmes de canalisations en plastiques - Tubes en plastiques thermodurcissables renforcés de verre (PRV) - Détermination de la résistance à long terme à la pression interne
La présente Norme spécifie une méthode pour la détermination du temps à la rupture de tubes en plastiques
thermodurcissables renforcés de verre (PRV). Il est admis que l’environnement externe puisse être constitué
d’eau ou d’air.
NOTE Pour d’autres environnements internes ou externes, il convient d’indiquer toute exigence supplémentaire dans
la norme en référence.
Cevni sistemi iz polimernih materialov - Cevi iz duromernih materialov, ojačenih s steklenimi vlakni (GRP) - Določanje dolgoročne odpornosti proti notranjemu tlaku
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kunststoff-Rohrleitungssysteme - Rohre aus glasfaserverstärkten duroplastischen Kunststoffen (GFK) - Bestimmung der Langzeit-Widerstandsfähigkeit gegen InnendruckSystèmes de canalisations en plastiques - Tubes en plastiques thermodurcissables renforcés de verre (PRV) - Détermination de la résistance à long terme à la pression internePlastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure83.120Reinforced plastics23.040.20Cevi iz polimernih materialovPlastics pipesICS:Ta slovenski standard je istoveten z:EN 1447:2009SIST EN 1447:2009en,fr,de01-junij-2009SIST EN 1447:2009SLOVENSKI
STANDARDSIST EN 1447:19971DGRPHãþD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1447March 2009ICS 23.040.20Supersedes EN 1447:1996
English VersionPlastics piping systems - Glass-reinforced thermosetting plastics(GRP) pipes - Determination of long-term resistance to internalpressureSystèmes de canalisations en plastiques - Tubes enplastiques thermodurcissables renforcés de verre (PRV) -Détermination de la résistance à long terme à la pressioninterneKunststoff-Rohrleitungssysteme - Rohre ausglasfaserverstärkten duroplastischen Kunststoffen (GFK) -Bestimmung der Langzeit-Widerstandsfähigkeit gegenInnendruckThis European Standard was approved by CEN on 10 February 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1447:2009: ESIST EN 1447:2009
The material-dependent parameters and/or performance requirements are incorporated in the referring standard. This standard is one of a series of standards on test methods which support System Standards for plastics piping systems and ducting systems. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.