EN ISO 11644:2009
(Main)Leather - Test for adhesion of finish (ISO 11644:2009)
Leather - Test for adhesion of finish (ISO 11644:2009)
ISO 11644:2009 specifies a method for measuring the adhesion of the finish to leather or the adhesion between two adjacent layers of the finish.
The method is valid for all finished leathers with a smooth surface that can be bonded to an adherent-plate without the adhesive penetrating into the finish. Preliminary experiments might be necessary to determine whether these conditions are met.
This test method is valid for finished leathers with a finish-coat thickness of at least 15 µm.
Leder - Prüfung der Haftfestigkeit von Zurichtungen (ISO 11644:2009)
Diese Internationale Norm legt ein Verfahren zur Ermittlung der Haftfestigkeit der Zurichtung am Leder oder der Haftfestigkeit zwischen zwei aneinander grenzenden Schichten der Zurichtung fest.
Dieses Verfahren ist für alle zugerichteten Leder mit einer glatten Oberfläche gültig, die an einen Träger geklebt werden können, ohne dass der Klebstoff in die Zurichtung eindringt. Einleitende Versuche können notwendig sein, um abzuklären, ob diese Bedingungen gelten.
Dieses Prüfverfahren gilt für zugerichtete Leder mit einer Schichtdicke der Zurichtung von mindestens 15 µm.
Cuir - Essai d'adhérence du finissage (ISO 11644:2009)
L'ISO 11644:2009 spécifie une méthode permettant de mesurer l'adhérence du finissage au cuir ou l'adhérence entre deux couches adjacentes du finissage.
Cette méthode convient pour tous les finissages de cuir ayant une surface lisse pouvant être collée à une plaque d'adhérence sans pénétration de la colle à l'intérieur du finissage. Des expériences préliminaires peuvent s'avérer nécessaires pour s'assurer du respect de ces conditions.
Cette méthode d'essai est valable pour des cuirs finis ayant une épaisseur de couche de finissage d'au moins 15 µm.
Usnje - Preskus vezave dodelavnih nanosov (ISO 11644:2009)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Usnje - Preskus vezave dodelavnih nanosov (ISO 11644:2009)Leder - Prüfung der Haftfestigkeit von Zurichtungen (ISO 11644:2009)Cuir - Essai d'adhérence du finissage (ISO 11644:2009)Leather - Test for adhesion of finish (ISO 11644:2009)59.140.30Usnje in krznoLeather and fursICS:Ta slovenski standard je istoveten z:EN ISO 11644:2009SIST EN ISO 11644:2009en,fr,de01-september-2009SIST EN ISO 11644:2009SLOVENSKI
STANDARDSIST EN ISO 11644:20041DGRPHãþD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 11644May 2009ICS 59.140.30Supersedes EN ISO 11644:2003
English VersionLeather - Test for adhesion of finish (ISO 11644:2009)Cuir - Essai d'adhérence du finissage (ISO 11644:2009)Leder - Prüfung der Haftfestigkeit von Zurichtungen (ISO11644:2008)This European Standard was approved by CEN on 6 May 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 11644:2009: ESIST EN ISO 11644:2009
Reference numberISO 11644:2009(E)IULTCS/IUF 470:2009(E)© ISO 2009
INTERNATIONAL STANDARD ISO11644IULTCS/IUF470Secondedition2009-05-15Leather — Test for adhesion of finish Cuir — Essai d'adhérence du finissage
ISO 11644:2009(E) IULTCS/IUF 470:2009(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©
ISO 2009 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2009 – All rights reserved
ISO 11644:2009(E) IULTCS/IUF 470:2009(E) © ISO 2009 – All rights reserved iiiContents Page Foreword.iv Introduction.v 1 Scope.1 2 Normative references.1 3 Terms and definitions.1 4 Principle.1 5 Apparatus and materials.2 6 Preparation of test specimens.4 7 Conditioning of the test specimens.5 8 Procedure.6 9 Test report.9 Annex A (informative)
Commercial sources for apparatus and materials.10 Annex B (informative)
Precision data from interlaboratory collaborative trial.11
ISO 11644:2009(E) IULTCS/IUF 470:2009(E) iv © ISO 2009 – All rights reserved Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 11644/IUF 470 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 289, Leather, in collaboration with the Fastness Tests Commission of the International Union of Leather Technologists and Chemists Societies (IUF Commision, IULTCS), in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). It is based on IUF 470 published in J. Soc. Leather Tech. Chem., 74, pp. 155-160, 1990, and was declared an official method of the IULTCS in September 1991. IULTCS, originally formed in 1897, is a world-wide organization of professional leather societies to further the advancement of leather science and technology. IULTCS has three Commissions, which are responsible for establishing international methods for the sampling and testing of leather. ISO recognizes IULTCS as an international standardizing body for the preparation of test methods for leather. This second edition cancels and replaces the first edition (ISO 11644:1993), which has been technically revised. This new version is a general update of the procedures, including an alternative adhesive and electronic evaluation of the force. SIST EN ISO 11644:2009
ISO 11644:2009(E) IULTCS/IUF 470:2009(E) © ISO 2009 – All rights reserved vIntroduction Prior to the first edition of this International Standard in 1993, a similar test method to that specified here, using an expoxy adhesive and metal adherent-plates had been in use in the leather trade for many years, but was never declared an official method by IULTCS or ISO. The adhesive frequently penetrates thin finish films, thus increasing the adhesion value unrealistically, and it is usually not possible to measure wet adhesion, as there is insufficient adhesion to the metal when water is present. Finishes with insufficient adhesion to the adhesive also occur quite frequently. In spite of these drawbacks, this old method was used regularly and was referred to in many specifications. The method specified in this International Standard eliminates most of these drawbacks. The adhesives used in this method harden quickly and there is no time for them to penetrate even quite thin finishes unless the finish has open cracks in it. While adhesion to most finishes is sufficient, a few cases still exist in which the adhesion is insufficient and either a different adhesive has to be used or the surface lightly roughened. As the adhesive does not penetrate, it is quite possible to test different layers of a multi-layer finish separately. Such a finish can be tested several times until all the layers have been removed from the leather. It would be advisable for specifications to make allowance for this fact. A strip of hard PVC is used as the adherent-plate; this gives good adhesion under wet conditions. Wet adhesion can therefore be measured easily. Experience has shown that this “real” wet-adhesion value is often lower, a fact that must also be considered when drawing up specifications based on this method. SIST EN ISO 11644:2009
INTERNATIONAL STANDARD ISO 11644:2009(E)IULTCS/IUF 470:2009(E) © ISO 2009 – All rights reserved 1Leather — Test for adhesion of finish 1 Scope This International Standard specifies a method for measuring the adhesion of the finish to leather or the adhesion between two adjacent layers of the finish. The method is valid for all finished leathers with a smooth surface that can be bonded to an adherent-plate without the adhesive penetrating into the finish. Preliminary experiments might be necessary to determine whether these conditions are met. This test method is valid for finished leathers with a finish-coat thickness of at least 15 µm. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 105-A02, Textiles — Tests for colour fastness — Part A02: Grey scale for assessing change in colour ISO 2418, Leather — Chemical, physical and mechanical and fastness tests — Sampling location ISO 2419, Leather — Physical and mechanical tests — Sample preparation and conditioning ISO 3696, Water for analytical laboratory use — Specification and test methods 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 adhesion force required to pull the leather away from its surface finish layer, the force being applied steadily, at an angle of about 90°, to a rigid adherent-plate to which the finished side of the leather has been bonded 4 Principle The finished side of part of a strip of leather is bonded to an adherent-plate by means of an adhesive film. Force is applied to the free end of the strip to peel the leather from the finish over a given distance, the finish layer remaining on the adherent-plate together with the film of adhesive. The force required is measured and reported as the adhesion value of the finish. The test is usually carried out on specimens conditioned in a standard atmosphere before testing. If required, the test may additionally be carried out on wetted specimens or on specimens that have previously been subjected to other treatments. SIST EN ISO 11644:2009
ISO 11644:2009(E) IULTCS/IUF 470:2009(E) 2 © ISO 2009 – All rights reserved 5 Apparatus and materials 5.1 Tensile-testing machine, incorporating the following features: a) a force range appropriate to the specimen under test; b) a uniform speed of separation of the jaws of 100 mm/min ± 5 mm/min; c) suitable means for fixing the adherent-plate holder (5.3) and either the hook link (5.4) or clamp (5.5); d) provision for recording a force-distance diagram during the test. 5.2 Adherent-plate, comprising a piece of hard poly(vinyl chloride) (PVC), or another suitable material, measuring approximately 70 mm × 20 mm × 3 mm, to which the leather specimen is bonded. PVC with a high infrared (IR) absorption is preferred. 5.3 Adhere
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.