EN 14908-9:2021
(Main)Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 9: Wireless Communication in ISM bands
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 9: Wireless Communication in ISM bands
This document specifies an adaptation layer for the control network protocol (CNP), as described in EN 14908 1 to utilize wireless communication network. This document defines the services of the wireless communication provided to CNP layer for delivering data and commands towards and from sensors, actuators, etc. which are wirelessly connected as part of the EN 14908 1 network.
In addition, this document defines the requirements for the radio communication applicable for CNP layer operation.
For the radio communication different frequency bands can be utilized. Annex A defines requirement for operation in different frequency bands.
Firmenneutrale Datenkommunikation für die Gebäudeautomation und Gebäudemanagement - Steuerungs-Netzwerk-Protokoll - Teil 9: Drahtlose Kommunikation im ISM Band
Dieses Dokument legt eine Adaptionsschicht für das Gebäude-Netzwerk-Protokoll (en: Control Network Protocol, CNP) fest, wie in EN 14908 1 beschrieben, um ein drahtloses Kommunikationsnetzwerk nutzen zu können. Dieses Dokument definiert die Dienste der drahtlosen Kommunikation, die der CNP-Schicht zur Verfügung gestellt werden, um Daten und Befehle an und von Sensoren, Aktoren usw. zu liefern, die drahtlos als Teil des Netzwerks nach EN 14908 1 verbunden sind.
Darüber hinaus definiert dieses Dokument die für den Betrieb der CNP-Schicht geltenden Anforderungen an die Funkkommunikation.
Für die Funkkommunikation können verschiedene Frequenzbänder verwendet werden. Anhang A definiert die Anforderungen für den Betrieb in verschiedenen Frequenzbändern.
Réseau ouvert de communication de données pour l’automatisation, la régulation et la gestion technique du bâtiment - Protocole de contrôle du réseau - Partie 9 : Communication sans fil dans les bandes ISM
Le présent document spécifie une couche adaptation pour le protocole de contrôle du réseau (CNP), comme décrit dans l’EN 14908 1 pour utiliser le réseau de communication sans fil. Le présent document définit les services de communication sans fil fournis à la couche CNP pour fournir des données et des commandes vers et depuis des capteurs, actionneurs, etc. qui sont connectés sans fil dans le cadre du réseau selon l’EN 14908 1.
En outre, le présent document définit les exigences relatives à la radiocommunication et applicables au fonctionnement de la couche CNP.
Pour la radiocommunication, différentes bandes de fréquences peuvent être utilisées. L’Annexe A définit les exigences de fonctionnement dans différentes bandes de fréquences.
Odprta izmenjava podatkov v avtomatizaciji stavb, regulaciji in upravljanju stavb - Protokol regulacijske mreže - 9. del: Brezžična komunikacija v pasu ISM
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2021
Odprta izmenjava podatkov v avtomatizaciji stavb, regulaciji in upravljanju stavb -
Protokol regulacijske mreže - 9. del: Brezžična komunikacija v pasu ISM
Open Data Communication in Building Automation, Controls and Building Management -
Control Network Protocol - Part 9: Wireless Communication in ISM bands
Firmenneutrale Datenkommunikation für die Gebäudeautomation und
Gebäudemanagement - Steuerungs-Netzwerk-Protokoll - Teil 9: Drahtlose
Kommunikation im ISM Band
Réseau ouvert de communication de données pour l’automatisation, la régulation et la
gestion technique du bâtiment - Protocole de contrôle du réseau - Partie 9 :
Communication sans fil dans les bandes ISM
Ta slovenski standard je istoveten z: EN 14908-9:2021
ICS:
35.240.67 Uporabniške rešitve IT v IT applications in building
gradbeništvu and construction industry
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 14908-9
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2021
EUROPÄISCHE NORM
ICS 91.140.01; 97.120; 35.240.67
English Version
Open Data Communication in Building Automation,
Controls and Building Management - Control Network
Protocol - Part 9: Wireless Communication in ISM bands
Réseau ouvert de communication de données pour Firmenneutrale Datenkommunikation für die
l'automatisation, la régulation et la gestion technique Gebäudeautomation und Gebäudemanagement -
du bâtiment - Protocole de contrôle du réseau - Partie Steuerungs-Netzwerk-Protokoll - Teil 9: Drahtlose
9 : Communication sans fil dans les bandes ISM Kommunikation im ISM Band
This European Standard was approved by CEN on 8 July 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14908-9:2021 E
worldwide for CEN national Members.
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Abbreviations . 7
5 Overview of ISM RF in EN 14908 based systems . 8
5.1 General. 8
5.2 ISM RF radio communication introduction . 8
5.2.1 Architecture . 8
5.2.2 ISM RF radio network elements . 9
5.3 ISM RF functional overview . 10
6 Control Network protocol information flows mapping to ISM RF . 11
6.1 General. 11
6.2 Address mapping principles . 11
6.3 Broadcast messages flows . 12
6.3.1 Messages from other segments of CNP network . 12
6.3.2 Messages from CNP application layers. 13
6.4 Unicast message flows . 13
6.4.1 Messages from CNP network . 13
6.4.2 Messages from RF node . 14
6.5 Multicast . 15
6.5.1 Messages from CNP network . 15
6.5.2 Messages from RF Node . 16
7 ISM RF radio network services to CNP applications . 17
7.1 General. 17
7.2 Attributes . 17
7.3 RF node addressing . 17
7.4 RF-DSAP Services . 18
7.4.1 Overview . 18
7.4.2 RF-DSAP-DATA_TX.request . 19
7.4.3 RF-DSAP-DATA_TX.confirm . 21
7.4.4 RF-DSAP-DATA_TX.indication . 21
7.4.5 RF-DSAP-DATA_RX.indication . 22
7.4.6 RF-DSAP-DATA_TX/RX.response . 23
7.5 RF-CSAP Services . 23
7.5.1 Overview . 23
7.5.2 RF-CSAP-ATTRIBUTE_WRITE.request . 23
7.5.3 RF-CSAP-ATTRIBUTE_WRITE.confirm . 26
7.5.4 RF-CSAP-ATTRIBUTE_READ.request . 27
7.5.5 RF-CSAP-ATTRIBUTE_READ.confirm . 27
7.6 Radio link layer security . 27
Annex A (normative) ISM RF Radio characteristics . 28
A.1 General requirements . 28
A.2 Supported operating frequency bands . 28
Bibliography . 29
European foreword
This document (EN 14908-9:2021) has been prepared by Technical Committee CEN/TC 247 “Building
Automation, Controls and Building Management”, the secretariat of which is held by SNV.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2022, and conflicting national standards shall
be withdrawn at the latest by March 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document is part of a series of European Standards for open data transmission in building
automation, control and in building management systems. The content of this document covers the data
communications used for management, automation/control and field functions. This document is based
on the American standards EIA/CEA-709.1-B Control Network Protocol Specification.
This document is part of a series of European Standards under the general title Open Data
Communication in Building Automation, Controls and Building Management — Control Network Protocol,
which comprises the following parts:
— Part 1: Protocol Stack
— Part 2: Twisted Pair Communication
— Part 3: Power Line Channel Specification
— Part 4: IP-Communication
— Part 5: Implementation
— Part 6: Application elements
— Part 7: Communication via internet protocols
— Part 8: Communication using Broadband over Power Line Networks — with internet protocols
— Part 9: Wireless Communication in ISM bands (this document)
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Introduction
This document enables utilization of wireless communication in the general title Control Network
Protocol (CNP) in the EN 14908 series. The wireless communication can provide fast and easy system
deployment, robust, de-centralized and autonomous network operation for EN 14908 based
applications.
Wireless communication is defined to operate in ISM bands, which are licensed exempt bands available
either regionally or globally.
1 Scope
This document specifies an adaptation layer for the control network protocol (CNP), as described in
EN 14908-1 to utilize wireless communication network. This document defines the services of the
wireless communication provided to CNP layer for delivering data and commands towards and from
sensors, actuators, etc. which are wirelessly connected as part of the EN 14908-1 network.
In addition, this document defines the requirements for the radio communication applicable for CNP
layer operation.
For the radio communication different frequency bands can be utilized. Annex A defines requirement
for operation in different frequency bands.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 14908-1:2014, Open Data Communication in Building Automation,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.