EN 13245-1:2004
(Main)Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of light coloured profiles
Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of light coloured profiles
This part of EN 13245 specifies a method for the designation of light coloured profiles made of unplasticized poly(vinyl chloride) (PVC-U) intended to be used for building applications and gives the relevant test methods. It is intended to be used in product specification when application is specified.
Pipes for the distribution of water, of gas or other fluids, as well as discharge and sewage pipes, profiles for the management of electrical power cables, communication cables and power track systems used for the distribution of electrical power, profiles for windows or doors and profiles made from expanded PVC are not covered by this document. )
Kunststoffe - Profile aus weichmacherfreiem Polyvinylchlorid (PVC-U) für die Anwendung im Bauwesen - Teil 1: Bezeichnung von hellfarbigen Profilen
In dieser Norm werden ein Verfahren zur Bezeichnung hellfarbiger Profile aus weichmacherfreiem Polyvinylchlorid (PVC-U) für Anwendungen im Bauwesen sowie die jeweiligen Prüfverfahren festgelegt. Sie ist für die Spezifizierung von Produkten vorgesehen, deren Anwendung festgelegt ist.
Plastiques - Profilés en poly(chlorure de vinyle) non plastifié (PVC-U) pour applications dans le bâtiment - Partie 1 : Désignation des profilés de coloris clair
La présente partie de l'EN 13245 spécifie une méthode de désignation des profilés de coloris clair fabriqués en poly(chlorure de vinyle) non plastifié (PVC-U), destinés à être utilisés pour les applications dans le bâtiment, et donne les méthodes d'essai correspondantes.
Les tubes pour la distribution d'eau, de gaz ou d'autres fluides, ainsi que les tubes d'évacuation et d'assainissement, les profilés pour la gestion des câbles d'énergie électrique, des câbles de communication et des systèmes de conducteurs préfabriqués utilisés pour la distribution de l'énergie électrique, les profilés pour les fenêtres et les portes et les profilés en PVC cellulaire ne sont pas concernés par le présent document ).
Polimerni materiali - Profili iz nemehčanega polivinilklorida (PVC-U) za uporabo v gradbeništvu - 1. del: Označevanje svetlo obarvanih profilov
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kunststoffe - Profile aus weichmacherfreiem Polyvinylchlorid (PVC-U) für die Anwendung im Bauwesen - Teil 1: Bezeichnung von hellfarbigen ProfilenPlastiques - Profilés en poly(chlorure de vinyle) non plastifié (PVC-U) pour applications dans le bâtiment - Partie 1 : Désignation des profilés de coloris clairPlastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of light coloured profiles83.140.99Drugi izdelki iz gume in polimernih materialovOther rubber and plastics productsICS:Ta slovenski standard je istoveten z:EN 13245-1:2004SIST EN 13245-1:2005en01-marec-2005SIST EN 13245-1:2005SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13245-1September 2004ICS 83.140.99 English versionPlastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles forbuilding applications - Part 1: Designation of light colouredprofilesPlastiques - Profilés en poly(chlorure de vinyle) non plastifié(PVC-U) pour applications dans le bâtiment - Partie 1 :Désignation des profilés de coloris clairKunststoffe - Profile aus weichmacherfreiemPolyvinylchlorid (PVC-U) für die Anwendung im Bauwesen -Teil 1: Bezeichnung von hellfarbigen ProfilenThis European Standard was approved by CEN on 24 June 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13245-1:2004: ESIST EN 13245-1:2005
Test method for the determination of the impact resistance.12 A.1 Principle.12 A.2 Apparatus.12 A.3 Test specimens.12 A.4 Conditioning.13 A.4.1 Impact resistance at 23 °C.13 A.4.2 Impact resistance at low temperature.13 A.5 Procedure.13 A.6 Expression of results.13 Bibliography.15
Profiles for internal and external wall and ceiling finishes. Part 3: Designation of coloured profiles Part 4: Designation of light coloured cellular unplasticized poly(chloride) (PVC-UE) profiles Part 5: Designation of coloured cellular unplasticized poly(chloride) (PVC-UE) profiles According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 13245-1:2005
1 Scope This part of EN 13245 specifies a method for the designation of light coloured profiles made of unplasticized poly(vinyl chloride) (PVC-U) intended to be used for building applications and gives the relevant test methods. It is intended to be used in product specification when application is specified.
Pipes for the distribution of water, of gas or other fluids, as well as discharge and sewage pipes, profiles for the management of electrical power cables, communication cables and power track systems used for the distribution of electrical power, profiles for windows or doors and profiles made from expanded PVC are not covered by this document.1)
2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 477:1995, Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors — Determination of the resistance to impact of main profiles by falling mass. EN 479, Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors — Determination of heat reversion. EN 513:1999, Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors — Determination of the resistance to artificial weathering. EN ISO 178, Plastics — Determination of flexural properties (ISO 178:2001) EN ISO 306:1996, Plastics — Thermoplastics materials — Determination of Vicat softening temperature (VST) (ISO 306:1994).
EN ISO 1163-2, Plastics — Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties (ISO 1163-2:1995). EN ISO 4892-2:1999, Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc sources (ISO 4892-2:1994). EN ISO 8256:1996, Plastics — Determination of tensile-impact strength (ISO 8256:1990, including Technical corrigendum 1:1991). ISO 7724-1, Paints and varnishes — Colorimetry — Part 1: Principles. ISO 7724-2, Paints and varnishes — Colorimetry — Part 2: Colour measurement. ISO 7724-3, Paints and varnishes — Colorimetry — Part 3: Calculation of colour differences.
1) Products that are excluded are in the scopes of CEN/TC 33, CEN/TC 155, CENELEC/TC 213. SIST EN 13245-1:2005
a* et b*, determined in accordance with ISO 7724-1, ISO 7724-2 and ISO 7724-3, using the test method D 65, SCI (specular reflectance included), 8/d or d/8, satisfy the following conditions : L* ≥ 82 -2,5 ≤ a* ≤ 5 -5 ≤ b* ≤ 15 4 Designation of profiles for building applications The profiles intended to be used for building applications are designated in accordance with a classification system of their characteristics based on the same principles as those used for the designation of compounds. This system consists of a description block and five data blocks as follows : Description block
Profile EN 13245-1 Block 1
Material identification : PVC-U Block 2
Intended application : one or more following codes shall be given depending on the intended application. a) For outside building applications
E
b) For inside building applications
I Block 3
Material properties : a) Vicat softening temperature (VST) See 5.1 b) Modulus of elasticity in flexure
See 5.2 Block 4
Profile properties : a) Nominal linear mass
See 5.3 b) Heat reversion at 100 °C
See 5.4 c) Impact resistance
See 5.5 Block 5
Properties after ageing : See 5.6
For co-extruded profiles, test plates shall be made from each compound, and a specimen shall be taken from each test plate. The values of the modulus of elasticity in flexure of each compound shall be coded from the internal layer to the external layer, with separation by “/”. See EXAMPLE 2 given in Clause 6.
Table 1 — Codes for block 3 Modulus of elasticity in flexure, E
Vicat softening temperature (VST) Range of values MPa Code The VST is represented by three figures showing the softening temperature. e.g. : code 082 for a nominal VST value of
82 °C.
1700 < E < 2000 2000 < E < 2300 2300 < E < 2600 2600 < E < 2900 2900 < E < 3200 3200 < E < 3500 1700 + 300 x n < E < 2000 + 300 x n a 17 20 23 26 29 32 17 + 3 x n a
n is an integer.
5.3 Nominal linear mass of the profile (block 4) 5.3.1 Test method for the determination of the linear mass 5.3.1.1 Apparatus Balance, with an accuracy of 0,1 g. Rule or measuring tape, with an accuracy of 0,5 mm. 5.3.1.2 Specimens The length of the specimen, measured between two cross sections cut perpendicularly to the main axis of the profile, shall be such that its mass is at least 50 g. 5.3.1.3 Procedure Condition the profile before measuring for at least 1 h, at (23 ±
2) °C. SIST EN 13245-1:2005
(1) where P
is the value of the linear mass of the profile, expressed in grams per metre, g/m. Calculate the tolerance, T, for the linear mass of the profile, using the following equation : T = ± 0,4 PM 0,7
(2) where PM is the value of the nominal linear mass of the profile, as declared by the manu
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.