EN 2130:2001

Aerospace series - Bearings, precision ball in corrosion resisting steel for instruments and equipment - Technical specification

This standard specifies the required characteristics, inspection and test methods, qualification and acceptance conditions for precision ball bearings, in corrosion resisting steel, with a nominal bore
diameter £ 8 mm, used for aerospace instruments and equipment.
It is applicable whenever referenced.

Luft- und Raumfahrt - Präzisionskugellager aus korrosionsbeständigem Stahl für Instrumente und Geräte - Technische Lieferbedingungen

Diese Norm legt die Anforderungen, Prüfverfahren, Qualifikations- und Annahmebedingungen für Präzisions-kugel-lager aus korrosionsbeständigem Stahl mit einem Bohrungs-Nenndurchmesser £ 8 mm fest, die für Instrumente und Geräte der Luft- und Raumfahrt verwendet werden.
Sie ist immer dann anzuwenden, wenn auf sie verwiesen wird.

Série aérospatiale - Roulements à billes de précision en acier résistant à la corrosion pour instruments et équipements - Spécification technique

La présente norme spécifie les caractéristiques requises, les méthodes de contrôle et d'essai, les conditions de qualification et de réception des roulements à billes de précision, en acier résistant à la corrosion, de diamètre nominal d'alésage £ 8 mm, pour instruments et équipements aéronautiques.
Elle s'applique chaque fois qu'elle est citée en référence.

Aerospace series - Bearings, precision ball in corrosion resisting steel for instruments and equipment - Technical specification

General Information

• Status: Published
• Publication Date: 23-Oct-2001
• Withdrawal Date: 29-Apr-2002
• ICS: 49.035 - Components for aerospace construction
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3 - Mechanical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 31-May-2017
• Ref Project: SIST EN 2130:2004 - Aerospace series - Bearings, precision ball in corrosion resisting steel for instruments and equipment - Technical specification

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Bearings, precision ball in corrosion resisting steel for instruments and equipment - Technical specificationLuft- und Raumfahrt - Präzisionskugellager aus korrosionsbeständigem Stahl für Instrumente und Geräte - Technische LieferbedingungenSérie aérospatiale - Roulements a billes de précision en acier résistant a la corrosion pour instruments et équipements - Spécification techniqueAerospace series - Bearings, precision ball in corrosion resisting steel for instruments and equipment - Technical specification49.035Sestavni deli za letalsko in vesoljsko gradnjoComponents for aerospace constructionICS:Ta slovenski standard je istoveten z:EN 2130:2001SIST EN 2130:2004en01-maj-2004SIST EN 2130:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2130October 2001ICS 49.035English versionAerospace series - Bearings, precision ball in corrosion resistingsteel for instruments and equipment - Technical specificationSérie aérospatiale - Roulements à billes de précision enacier résistant à la corrosion pour instruments etéquipements - Spécification techniqueLuft- und Raumfahrt - Präzisionskugellager auskorrosionsbeständigem Stahl für Instrumente und Geräte -Technische LieferbedingungenThis European Standard was approved by CEN on 15 January 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2130:2001 ESIST EN 2130:2004

8 mm, used for aerospace instruments and equipment.It is applicable whenever referenced.2Normative referencesThis European Standard incorporates, by dated or undated reference, provisions from other publications.These normative references are cited at the appropriate places in the text and the publications are listedhereafter. For dated references, subsequent amendments to or revisions of any of these publications apply tothis European Standard only when incorporated in it by amendment or revision. For undated references, thelatest edition of the publication referred to applies (including amendments).ISO 1132-1Rolling bearings – Tolerances – Part 1: Terms and definitionsISO 2859-1Sampling procedures for inspection by attributes – Part 1 : Sampling schemes indexed byacceptance quality limit (AQL) for lot-by-lot inspectionISO 3290Rolling bearings – Balls – Dimensions and tolerancesEN 2079Aerospace series – Bearings, precision ball, with flange in corrosion resisting steel, forinstruments and equipment – Dimensions and loadsEN 3042Aerospace series – Quality assurance – EN aerospace products – Qualification procedureEN 3446Aerospace series – Bearings, precision ball without flange in corrosion resisting steel, forinstruments and equipment – Dimensions and loadsEN 10204Metallic products – Types of inspection documents3DefinitionsFor the purposes of this standard, the following definitions apply:3.1Precision ball bearing3.1.1Shielded rolling bearingA bearing whose rolling elements and raceways are protected with shields attached to one of the rings andseparated from the other by a small space.3.1.2Sealed rolling bearingA bearing whose rolling elements and raceways are completely enclosed by seals attached to the outer ringand rubbing on the other.SIST EN 2130:2004
...