EN ISO 3380:2015
(Main)Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 °C (ISO 3380:2015)
Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 °C (ISO 3380:2015)
ISO 3380:2015 specifies a method for determination of the shrinkage temperature of leather up to 100 °C. It is applicable to all leathers.
Leder - Physikalische und mechanische Prüfungen - Bestimmung der Schrumpfungstemperatur bis 100 °C (ISO 3380:2015)
Cuir - Essais physiques et mécaniques - Détermination de la température de rétrécissement jusqu'à 100 °C (ISO 3380:2015)
L'ISO 3380:2015 spécifie une méthode de détermination de la température de rétrécissement du cuir jusqu'à 100 °C. Elle est applicable à tous les cuirs.
Usnje - Fizikalni in mehanski preskusi - Ugotavljanje temperature krčenja do 100 °C (ISO 3380:2015)
Ta mednarodni standard določa metodo za ugotavljanje temperature krčenja
usnja do 100 °C. Uporablja se za vse vrste usnja.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 3380:2015
01-december-2015
1DGRPHãþD
SIST EN ISO 3380:2003
8VQMH)L]LNDOQLLQPHKDQVNLSUHVNXVL8JRWDYOMDQMHWHPSHUDWXUHNUþHQMDGRƒ
& ,62
Leather - Physical and mechanical tests - Determination of shrinkage temperature up to
100 degrees C (ISO 3380:2015)
Leder - Physikalische und mechanische Prüfungen - Bestimmung der
Schrumpfungstemperatur bis 100 °C (ISO 3380:2015)
Cuir - Essais physiques et mécaniques - Détermination de la température de
rétrécissement jusqu'à 100 degrés C (ISO 3380:2015)
Ta slovenski standard je istoveten z: EN ISO 3380:2015
ICS:
59.140.30 Usnje in krzno Leather and furs
SIST EN ISO 3380:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 3380:2015
---------------------- Page: 2 ----------------------
SIST EN ISO 3380:2015
EN ISO 3380
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2015
EUROPÄISCHE NORM
ICS 59.140.30 Supersedes EN ISO 3380:2002
English Version
Leather - Physical and mechanical tests - Determination of
shrinkage temperature up to 100 °C (ISO 3380:2015)
Cuir - Essais physiques et mécaniques - Détermination Leder - Physikalische und mechanische Prüfungen -
de la température de rétrécissement jusqu'à 100 °C Bestimmung der Schrumpfungstemperatur bis 100 °C
(ISO 3380:2015) (ISO 3380:2015)
This European Standard was approved by CEN on 8 August 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3380:2015 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 3380:2015
EN ISO 3380:2015 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 3380:2015
EN ISO 3380:2015 (E)
European foreword
This document (EN ISO 3380:2015) has been prepared by Technical Committee CEN/TC 289 “Leather”,
the secretariat of which is held by UNI, in collaboration with Technical Committee IULTCS
“International Union of Leather Technologists and Chemists Societies”.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2016, and conflicting national standards shall
be withdrawn at the latest by March 2016.
This document supersedes EN ISO 3380:2002.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 3380:2015 has been approved by CEN as EN ISO 3380:2015 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 3380:2015
---------------------- Page: 6 ----------------------
SIST EN ISO 3380:2015
INTERNATIONAL ISO
STANDARD 3380
IULTCS/IUP 16
Third edition
2015-0
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.