EN 16419:2014

Leather - Chamois leather for cleaning purposes - Classification and requirements

This European Standard applies to chamois leather for cleaning purposes and defines both requirements and standard test methods.

Leder - Sämischleder für Reinigungszwecke - Klassifizierung und Anforderungen

Diese Europäische Norm gilt für Sämischleder für Reinigungszwecke und legt sowohl Anforderungen als auch Standard-Prüfverfahren fest.

Cuir - Peau chamoisée - Classification et exigences

La présente Norme européenne s'applique aux peaux chamoisées pour le nettoyage et définit des exigences et des méthodes d'essai normalisées.

Usnje - Semiš usnje - Klasifikacija in zahteve

General Information

• Status: Published
• Publication Date: 21-Jan-2014
• Withdrawal Date: 30-Jul-2014
• ICS: 59.140.30 - Leather and furs
• ICS: 97.080 - Cleaning appliances
• Technical Committee: CEN/TC 289 - Leather
• Drafting Committee: CEN/TC 289/WG 4 - Technical specifications on the use of leather and terminology
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Nov-2019
• Ref Project: SIST EN 16419:2014 - Leather - Chamois leather - Classification and requirements

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Usnje - Semiš usnje - Klasifikacija in zahteveLeder - SämischlederCuir - Peau chamoisée - Classification et exigencesLeather - Chamois leather - Classification and requirements59.140.30Usnje in krznoLeather and fursICS:Ta slovenski standard je istoveten z:EN 16419:2014SIST EN 16419:2014en,fr,de01-april-2014SIST EN 16419:2014SLOVENSKI
STANDARD



SIST EN 16419:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16419
January 2014 ICS 59.140.30 English Version
Leather - Chamois leather for cleaning purposes - Classification and requirements
Cuir - Peau chamoisée - Classification et exigences
Leder - Sämischleder für Reinigungszwecke - Klassifizierung und Anforderungen This European Standard was approved by CEN on 23 November 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16419:2014 ESIST EN 16419:2014



EN 16419:2014 (E) 2 Contents Page Foreword .3 Introduction .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .6 4 Sampling and conditioning .6 5 Classification by quality .7 6 Requirements .8 7 Labelling .9 7.1 General .9 7.2 Essential information .9 7.3 Additional information .9 8 Marking .9 SIST EN 16419:2014



EN 16419:2014 (E) 3 Foreword This document (EN 16419:2014) has been prepared by Technical Committee CEN/TC 289 “Leather”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2014, and conflicting national standards shall be withdrawn at the latest by July 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulatio
...