FprCEN/TS 16157-13
(Main)Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 13: Status, fault and quality requirements
Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 13: Status, fault and quality requirements
The proposed Part 13 will specify a DATEX II platform-independent model for expression of intelligent transport system device status and fault data. It will follow the EN 16157-1 methodology and reuse common concepts from EN 16157-2 and EN 16157-7.
It will define a UML model with a corresponding data dictionary and XML Schema.
The model will define a device publication which identifies static data, a device status publication, and a device faults publication.
Devices in scope are any that participate in intelligent transport systems.
This specification may be used in system-to-system exchanges about device status and faults, for example a traffic management system that performs operational control of devices may provide information about the status and faults of those devices to a separate technology status and fault management system.
Intelligente Verkehrssysteme - Verkehrsmanagementsysteme - Status-, Fehler- und Qualitätsanforderungen
Systèmes de transport intelligents - systèmes de gestion du trafic - Exigences en matière d'état, de défauts et de qualité
Inteligentni transportni sistemi - Specifikacije za izmenjavo podatkov DATEX II pri upravljanju prometa in informiranju - 13. del: Zahteve glede stanja, napak in kakovosti
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2024
Inteligentni transportni sistemi - Specifikacije za izmenjavo podatkov DATEX II pri
upravljanju prometa in informiranju - 13. del: Zahteve glede stanja, napak in
kakovosti
Intelligent transport systems - DATEX II data exchange specifications for traffic
management and information - Part 13: Status, fault and quality requirements
Intelligente Verkehrssysteme - Verkehrsmanagementsysteme - Status-, Fehler- und
Qualitätsanforderungen
Systèmes de transport intelligents - systèmes de gestion du trafic - Exigences en matière
d'état, de défauts et de qualité
Ta slovenski standard je istoveten z: FprCEN/TS 16157-13
ICS:
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
FINAL DRAFT
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
October 2024
ICS
English Version
Intelligent transport systems - DATEX II data exchange
specifications for traffic management and information -
Part 13: Status, fault and quality requirements
Systèmes de transport intelligents - systèmes de Intelligente Verkehrssysteme -
gestion du trafic - Exigences en matière d'état, de Verkehrsmanagementsysteme - Status-, Fehler- und
défauts et de qualité Qualitätsanforderungen
This draft Technical Specification is submitted to CEN members for Vote. It has been drawn up by the Technical Committee
CEN/TC 278.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a Technical Specification. It is distributed for review and comments. It is subject to change
without notice and shall not be referred to as a Technical Specification.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TS 16157-13:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Symbols and abbreviated terms . 6
5 UML notation . 6
6 The FaultAndStatus namespace . 6
6.1 Overview of the FaultAndStatus nameapce . 6
6.2 Device publication . 7
6.2.1 Overview . 7
6.2.2 DevicePublication . 8
6.2.3 DeviceTable . 8
6.2.4 Device . 8
6.2.5 PhysicalDeviceDetails . 8
6.2.6 Component . 9
6.3 Device status publication . 9
6.3.1 Overview . 9
6.3.2 StatusPublication . 9
6.3.3 StatusOfAllDevicesFromTable . 10
6.3.4 Status . 10
6.3.5 OperationalState . 11
6.3.6 DevicePower . 11
6.4 Device faults publication . 11
6.4.1 Overview . 11
6.4.2 FaultPublication . 12
6.4.3 FaultsOfAllDevicesFromTable . 12
6.4.4 AllFaultsOfSingleDevice . 12
6.4.5 DeviceFault . 13
6.5 Classes . 13
6.5.1 Overview . 13
6.5.2 DeviceTableReference . 14
6.5.3 GeneralDeviceTableReference . 14
6.5.4 VmsUnitTableReference. 15
6.5.5 MeasurementSiteTableReference . 15
6.5.6 DeviceReference . 15
6.5.7 GeneralDeviceReference . 15
6.5.8 VmsUnitReference . 15
6.5.9 MeasurementSiteReference . 15
6.5.10 CatalogueInformation . 15
6.6 DataTypes . 15
Annex A (normative) Data Dictionary . 17
Annex B (normative) XML Schema . 39
Annex C (normative) Additional common datatypes . 64
Bibliography. 66
European foreword
This document (FprCEN/TS 16157-13:2024) has been prepared by Technical Committee CEN/TC 278
“Intelligent transport systems”, the secretariat of which is held by NEN.
This document is currently submitted to the Vote on TS.
The CEN 16157 series consists of several parts under the general title “Intelligent transport systems —
DATEX II data exchange specifications for traffic management and information”.
This document will supersede CEN/TS 17241:2019.
CEN/TS 16157-13:2024 includes the following significant technical changes with respect to
CEN/TS 17241:2019:
• The status and faults model has been upgraded to improve fit with other parts in the CEN 16157
series, avoiding duplication, to add further functionality, and to clarify concepts.
• The illustration of quality and performance criteria included in CEN/TS 17241:2019 (as Clause 5) is
not included here.
• The explicit ASN.1 specifications of CEN/TS 17241 are not included here (equivalent ASN.1
specifications can be derived from this CEN/TS).
• The annex on management of electronic traffic regulations is not included here.
Introduction
This document defines a common set of data exchange specifications to support the vision of a seamless
interoperable exchange of road traffic and travel information across boundaries, including national,
urban, interurban, road administrations, infrastructure providers and service providers.
Standardization in this context is a vital constituent to ensure interoperability, reduction of risk,
reduction of the cost base, promotion of open marketplaces and many social, economic and community
benefits to be gained from more informed travellers, network managers and transport operators.
Deploying intelligent transport systems in line with European Sustainable and Smart Mobility Strategy
as issued by the European Commission requires co-ordination of traffic management operation and
development of seamless pan-European information services. These jointly aim at contributing to the
transformation of the European transport system for the objectives of efficient, safe, sustainable, smart
and resilient mobility.
In this context the European Commission has been supporting the development of information
exchange between the actors of road traffic management and related services for several years. In the
road sector, DATEX II has been long in fruition, with the European Commission being fundamental to its
development through an initial contract and subsequent co-funding of the further evolution of the
standard and user support ecosystem. With this standardization of DATEX II, there is a real basis for
common exchange between the actors of the traffic and travel information sector both in the
collaboration between traffic management organisations and their systems, as well as in coherent
information provision to service providers. DATEX II supports the requirements of the stakeholder
organisations involved in the road traffic and travel domain in compliance with the EU policy and legal
frameworks aimed at the sector.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
1 Scope
This document specifies a data model for the status and faults of components of traffic management
systems.
The data model is intended for use in system-to-system data exchanges for device status and fault
management purposes.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 16157-1:2018, Intelligent transport systems - DATEX II data exchange specifications for traffic
management and information - Part 1: Context and framework
EN 16157-2:2019, Intelligent transport systems - DATEX II data exchange specifications for traffic
management and information - Part 2: Location referencing
EN 16157-7:2018, Intelligent trans
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.