iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 21802:2021

(Main)

Assistive products - Guidelines on cognitive accessibility - Daily time management (ISO 21802:2019)

Assistive products - Guidelines on cognitive accessibility - Daily time management (ISO 21802:2019)

This document specifies principles of cognitive accessibility within the area of daily time management.
This document gives guidelines for design application for features and functions known to increase the accessibility of products and systems used to support daily time management for people with cognitive impairment regardless of age.
This document does not provide test methods and specific instructions for measuring and reporting.
NOTE       ANSI/RESNA CA-1:2016 specifies features, measurement methods, and documentation for reporting the universal design specifications that support inclusion of individuals with cognitive impairment that might be applicable and beneficial to use for evaluating products and systems used to support daily time management.

Technische Hilfen - Leitfaden zur kognitiven Zugänglichkeit - Tägliches Zeitmanagement (ISO 21802:2019)

Dieses Dokument legt Grundsätze der kognitiven Zugänglichkeit innerhalb des täglichen Zeitmanagements fest.
Dieses Dokument gibt einen Leitfaden für die Gestaltung von Merkmalen und Funktionen, von denen bekannt ist, dass sie die Zugänglichkeit von Produkten und Systemen, die zur Unterstützung des täglichen Zeitmanage¬ments eingesetzt werden, für Menschen mit kognitiven Einschränkungen unabhängig vom Alter verbessern.
Dieses Dokument enthält keine Prüfverfahren und konkreten Anweisungen zum Messen und Berichterstatten.
ANMERKUNG   ANSI/RESNA CA 1:2016 legt Merkmale, Messverfahren und die Dokumentation hinsichtlich der Angabe der Spezifikationen des Universellen Designs fest, dass die Inklusion von Personen mit kognitiven Einschränkungen unter¬stützt, die bei der Bewertung von Produkten und Systemen zur Unterstützung des täglichen Zeitmanagements anwendbar und vorteilhaft sein könnten.

Produits d'assistance - Lignes directrices relatives à l'accessibilité cognitive - Gestion quotidienne (ISO 21802:2019)

Le présent document spécifie les principes d’accessibilité cognitive dans le domaine de la gestion du temps quotidien.
Il donne les lignes directrices relatives à l’application de conception pour des caractéristiques et fonctions connues pour favoriser l’accessibilité des produits et systèmes utilisés afin de faciliter la gestion du temps quotidien chez les personnes souffrant de déficiences cognitives, quel que soit leur âge.
Le présent document ne fournit pas les méthodes d’essai et les instructions spécifiques relatives au mesurage et au compte-rendu.
NOTE            L’ANSI/RESNA CA-1:2016 spécifie les caractéristiques, les méthodes de mesure et la documentation relatives au compte-rendu des spécifications de conception universelles qui favorisent l’intégration d’individus souffrant de déficiences cognitives, qui peuvent être applicables et utiles pour évaluer les produits et systèmes employés pour faciliter la gestion du temps quotidien.

Tehnični pripomočki - Smernice za kognitivno dostopnost - Dnevno upravljanje časa (ISO 21802:2019)

General Information

Status
Published
Publication Date
03-Aug-2021
Withdrawal Date
27-Feb-2022
ICS
11.180.01 - Aids for disabled and handicapped persons in general
Technical Committee
CEN/TC 293 - Technical aids for disabled persons
Drafting Committee
CEN/TC 293 - Technical aids for disabled persons
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
04-Aug-2021
Due Date
13-May-2023
Completion Date
04-Aug-2021
Ref Project
SIST EN ISO 21802:2021 - Assistive products - Guidelines on cognitive accessibility - Daily time management (ISO 21802:2019)

Buy Standard

EN ISO 21802:2021 - BARVEEN ISO 21802:2021 - BARVE
PreviousNext
Standard
EN ISO 21802:2021 - BARVE
English language
30 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 21802:2021
01-oktober-2021
Tehnični pripomočki - Smernice za kognitivno dostopnost - Dnevno upravljanje
časa (ISO 21802:2019)
Assistive products - Guidelines on cognitive accessibility - Daily time management (ISO
21802:2019)
Technische Hilfen - Leitfaden zur kognitiven Zugänglichkeit - Tägliches Zeitmanagement
(ISO 21802:2019)
Produits d'assistance - Lignes directrices relatives à l'accessibilité cognitive - Gestion
quotidienne (ISO 21802:2019)
Ta slovenski standard je istoveten z: EN ISO 21802:2021
ICS:
11.180.01 Pripomočki za Aids for disabled and
onesposobljene in handicapped persons in
hendikepirane osebe na general
splošno
SIST EN ISO 21802:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 21802:2021

---------------------- Page: 2 ----------------------
SIST EN ISO 21802:2021


EN ISO 21802
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2021
EUROPÄISCHE NORM
ICS 11.180.01
English Version

Assistive products - Guidelines on cognitive accessibility -
Daily time management (ISO 21802:2019)
Produits d'assistance - Lignes directrices relatives à Technische Hilfen - Leitfaden zur kognitiven
l'accessibilité cognitive - Gestion quotidienne (ISO Zugänglichkeit - Tägliches Zeitmanagement (ISO
21802:2019) 21802:2019)
This European Standard was approved by CEN on 18 July 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 21802:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 21802:2021
EN ISO 21802:2021 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 21802:2021
EN ISO 21802:2021 (E)
European foreword
The text of ISO 21802:2019 has been prepared by Technical Committee ISO/TC 173 "Assistive
products” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 21802:2021 by Technical Committee CEN/TC 293 “Assistive products and accessibility” the
secretariat of which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2022, and conflicting national standards
shall be withdrawn at the latest by February 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 21802:2019 has been approved by CEN as EN ISO 21802:2021 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 21802:202
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 21801-2:2022(Main)
Cognitive accessibility - Part 2: Reporting (ISO 21801-2:2022)
SIST EN ISO 21801-2:2023

This document specifies requirements for reporting the cognitive accessibility of systems, including assistive products, assistive technologies, consumer technologies, and household appliances, according to the recommendations given in ISO 21801-1:2020.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 20342-1:2022(Main)
Assistive products for tissue integrity when lying down - Part 1: General requirements (ISO 20342-1:2022)
SIST EN ISO 20342-1:2022

This document specifies general requirements and related test methods that are relevant to assistive products for tissue integrity (APTI) in the lying position in different application environments such as hospitals, home care and institutions. This document applies to the safety of APTI that are intended to remain in situ during periods of lying, and to prevent and/or treat pressure injuries.
This document covers a range of different lying support surfaces intended to be used in combination with the appropriate support platform (adjustable included) or as a whole integrated system.
This document does not apply to medical beds.
This document also covers assistive products primarily intended for tissue integrity for changing a lying position and assistive products for maintaining a lying position.
This document does not apply to lying support surfaces used in combination with incubators or operating/surgical tables.
It also covers safety and performance test methods to ensure protection against injuries to the user.
This document addresses the combination of a full body support surface and an adjustable mattress support platform. It also covers safety and performance test methods to ensure protection against injuries to the user.
This document specifies requirements and test methods for APTI within the following classifications of ISO 9999:2022:
04 33 06 Assistive products for tissue integrity when lying down such as but not limited to
—    mattresses and mattress overlays for pressure injury prevention, and
—    mattress coverings for pressure injury prevention mattresses.
12 31 03 Assistive products for sliding and turning such as but not limited to the following:
Devices for changing position or direction of a person using sliding or turning techniques. The only products included are those intended to be used in a lying position and remain in situ as part of the lying support surface. They are the following:
—    sliding products that glide one way and lock the other way;
—    sheets and underlays in flexible materials with low friction;
—    fabric sold by the metre, cut as required for repositioning use;
—    powered turning product;
This excludes sliding boards unless the product is intended to be left in situ.
09 07 06 Positioning pillows, positioning cushions and positioning systems such as but not limited to
—    leg positioners,
—    arm positioners, and
—    multipurpose body positioners.
18 12 15 Bedding such as but not limited to
—    draw sheets.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 21856:2022(Main)
Assistive products - General requirements and test methods (ISO 21856:2022)
SIST EN ISO 21856:2022

This document specifies general requirements and test methods for assistive products, considered to be medical devices, intended for use to alleviate or compensate for a disability.
This document does not apply to assistive products which achieve their intended purpose by administering pharmaceutical substances to the user.
NOTE 1    Assistive products are considered to be medical devices in some jurisdictions but not in others.
NOTE 2    Requirements and test methods for particular types of assistive products are given in other International Standards, e.g. see Reference [33].
NOTE 3    Not all the items listed in ISO 9999 are medical devices. Contracting parties might wish to consider if this document or specific clauses or subclauses can be used for assistive products that are not medical devices.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9999:2022(Main)
Assistive products - Classification and terminology (ISO 9999:2022)
SIST EN ISO 9999:2022

This document specifies a classification and terminology of assistive products, especially produced or generally available, for persons to optimize functioning and reduce disability.
Assistive products used by a person to optimize functioning and reduce disability, but which require the assistance of another person for their operation, are included in the classification.
The following items are specifically excluded from this document:
—    items used for the installation of assistive products;
—    solutions obtained by combinations of assistive products that are individually classified in this document;
—    medicines;
—    assistive products and instruments used exclusively by healthcare professionals or by teachers;
—    non-technical solutions, such as personal assistance, guide dogs or lip-reading;
—    implanted devices;
—    financial support.

  • Standard
    202 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TR 20342-7:2022(Main)
Assistive products for tissue integrity when lying down - Part 7: Foam properties, characteristics and performance (ISO/TR 20342-7:2021)
SIST-TP CEN ISO/TR 20342-7:2022

This document lists the terminology and common test methods used by manufacturers and laboratories to quantify the performance of a foam material. It also and gives information to users or buyers of these products to make an educated assessment of the relevance of the physical characteristics between various products offered to them.
This document summarizes/gives information about the tests for
—    polyurethane foams – typically polyether (polyether polyurethane foam) or polyester based (polyester polyurethane foam) – produced by either slabstock (slabstock foam) or moulded foam process, and
—    latex foams produced by either the Dunlop process or Talalay process.
The physical properties addressed in this document are
a) resilience,
b) hysteresis,
c) support/SAG factor,
d) density,
e) hardness,
f) compression set,
g) tensile strength,
h) tear strength,
i) air flow/permeability,
j) resistance to fatigue, and
k) microbial resistance.
NOTE       The test methods presented in this document do not necessarily simulate conditions of use in practice. The use of resulting data is therefore restricted to a broad comparative assessment between different foam products.
This document addresses only the characterization and performance of foam materials used in APTIs. It does not address the design, construction method or other factors relating to the final clinical efficiency of the product.
Test methods for characterizing the physical properties of any coverings, or the effects of any coverings on the physical properties of the foams, are not addressed in this document.

  • Technical report
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TS 20342-10:2022(Main)
Assistive products for tissue integrity when lying down - Part 10: Guidance to cleaning, disinfecting and care of polyurethane APTI covers (ISO/TS 20342-10:2022)
SIST-TS CEN ISO/TS 20342-10:2022

This document provides guidance around best practices for cleaning, disinfecting and caring for the polyurethane covers for assistive products for tissue integrity when lying down (APTIs) where the covers are designed to protect the internal components of the APTI from damage. Adherence to this guidance will extend the operational life of the APTI and its tissue integrity performance.
This document gives guidance for cleaning and disinfecting by manual means only.
This document is not intended to give guidance related to the efficacy of the cleaning and disinfection procedures.

  • Technical specification
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 21801-1:2021(Main)
Cognitive accessibility - Part 1: General guidelines (ISO 21801-1:2020)
SIST EN ISO 21801-1:2021

This document presents guidelines for the design and development of cognitively accessible systems, including products and services and built environments.
This document is relevant to mainstream systems as well as those designed specifically for people with disability.
Within the broad field of accessibility, this document is limited to guidance related to cognitive accessibility.
NOTE 1  It acknowledges, however, that diverse sensory perceptions can impact cognitive accessibility.
NOTE 2  While the following guidance in this document can benefit all users, it is included here because failure to follow it could lead to barriers that would prevent some potential users from being able to use the system at all.
This document is relevant to all types of systems. However, some particular recommendations can only be followed for some types of systems:
—     Some of the guidance is relevant to a fixed system (e.g. a non-computerized consumer product or a user manual);
—     Some of the guidance applies to systems containing some level of computer-based processing (e.g. a microwave oven or an ICT-system);
—     Some of the guidance applies to systems that use advanced computer processing that supports individualization (e.g. an application in a smart phone);
—     Some guidance applies to combinations of the above.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 17999(Main)
Accessible systems for living independently - Requirements and recommendations
oSIST prEN 17999:2023

This document specifies requirements, recommendations, and guidance on aspects of accessible systems for living independently (ASLI) in relation to technical solutions, service design, provision, and information. This includes adapting design and functionality of systems, to allow ease of use by any user, regardless of their abilities.
This document does not cover system-to-system communication.
This standard is not applicable to household and similar electrical appliances covered by EN IEC 63008 [8].

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 20342-1:2019/prA1(Amendment)
Assistive products for tissue integrity when lying down - Part 1: General requirements - Amendment 1 (ISO 20342-1:2019/DAM 1:2021)
SIST EN ISO 20342-1:2019/oprA1:2021
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 21801-2:2022(Main)
Cognitive accessibility - Part 2: Reporting (ISO 21801-2:2022)
SIST EN ISO 21801-2:2023

This document specifies requirements for reporting the cognitive accessibility of systems, including assistive products, assistive technologies, consumer technologies, and household appliances, according to the recommendations given in ISO 21801-1:2020.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day