EN 1071-2:2002

Advanced technical ceramics - Methods of test for ceramic coatings - Part 2: Determination of coating thickness by the crater grinding method

This part of this European Standard specifies a method for the determination of the thickness of ceramic coatings by a crater grinding method which includes the grinding of a spherical cavity and subsequent microscopic examination of the crater.
NOTE   An alternative measurement of thickness, using a contact probe profilometer, is specified in EN 1071 1.

Hochleistungskeramik - Verfahren zur Prüfung keramischer Schichten - Teil 2: Bestimmung der Schichtdicke mit dem Kalottenschleifverfahren

Dieser Teil der Europäischen Norm legt ein Verfahren zur Bestimmung der Dicke von keramischen Schichten mit einem Kalottenschleifverfahren, das das Schleifen einer sphärischen Kalotte und die anschließende mikroskopische Prüfung der Kalotte einschließt, fest.
ANMERKUNG   Eine alternative Dickenmessung mit einem Kontaktprofilometer ist in prEN 1071-1 angegeben.

Céramiques techniques avancées - Méthodes d'essai pour revêtements céramiques - Partie 2: Détermination de l'épaisseur du revêtement par la méthode d'abrasion d'une calotte sphérique

La présente partie de cette Norme européenne spécifie une méthode permettant de déterminer l'épaisseur de revêtements céramiques par une méthode d'abrasion d'une calotte sphérique qui comprend l'obtention par abrasion d'une cavité sphérique suivie d'un examen microscopique du cratère obtenu.
NOTE   Une autre méthode de mesure de l'épaisseur, à l'aide d'un profilomètre à contact, est spécifiée dans l'EN 1071-1.

Advanced technical ceramics - Methods of test for ceramic coatings - Part 2: Determination of coating thickness by the crater grinding method

General Information

• Status: Withdrawn
• Publication Date: 12-Nov-2002
• Withdrawal Date: 19-Apr-2016
• ICS: 17.040.20 - Properties of surfaces
• ICS: 25.220.99 - Other treatments and coatings
• ICS: 81.060.30 - Advanced ceramics
• Technical Committee: CEN/TC 184 - Advanced technical ceramics
• Drafting Committee: CEN/TC 184/WG 5 - Ceramic coatings
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 20-Apr-2016
• Mandate: M/BC/CEN/90/4 - Request concerning the realisation of a standardization programme in the field of advanced technical ceramics
• Ref Project: SIST EN 1071-2:2004 - Advanced technical ceramics - Methods of test for ceramic coatings - Part 2: Determination of coating thickness by the crater grinding method

Relations

• Replaces: ENV 1071-2:1993 - Advanced technical ceramics - Methods of test for ceramic coatings - Part 2: Determination of coating thickness by the cap grinding method
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 26423:2016 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of coating thickness by crater-grinding method (ISO 26423:2009)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Advanced technical ceramics - Methods of test for ceramic coatings - Part 2: Determination of coating thickness by the crater grinding methodHochleistungskeramik - Verfahren zur Prüfung keramischer Schichten - Teil 2: Bestimmung der Schichtdicke mit dem KalottenschleifverfahrenCéramiques techniques avancées - Méthodes d'essai pour revetements céramiques - Partie 2: Détermination de l'épaisseur du revetement par la méthode d'abrasion d'une calotte sphériqueAdvanced technical ceramics - Methods of test for ceramic coatings - Part 2: Determination of coating thickness by the crater grinding method81.060.30Sodobna keramikaAdvanced ceramics25.220.99Druge obdelave in prevlekeOther treatments and coatingsICS:Ta slovenski standard je istoveten z:EN 1071-2:2002SIST EN 1071-2:2004en01-januar-2004SIST EN 1071-2:2004SLOVENSKI
STANDARDSIST ENV 1071-2:20001DGRPHãþD

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1071-2November 2002ICS 81.060.30Supersedes ENV 1071-2:1993English versionAdvanced technical ceramics - Methods of test for ceramiccoatings - Part 2: Determination of coating thickness by thecrater grinding methodCéramiques techniques avancées - Méthodes d'essai pourrevêtements céramiques - Partie 2: Détermination del'épaisseur du revêtement par la méthode d'abrasion d'unecalotte sphériqueHochleistungskeramik - Verfahren zur Prüfung keramischerSchichten - Teil 2: Bestimmung der Schichtdicke mit demKalottenschleifverfahrenThis European Standard was approved by CEN on 10 August 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1071-2:2002 ESIST EN 1071-2:2004

Errors associated with using different formulae for calculating film thickness.13Bibliography.16SIST EN 1071-2:2004
...