Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003)

ISO 14923:2003 specifies an overview of the characteristics of coatings produced by thermal spraying.
It is not possible in ISO 14923:2003 to go into details regarding the different types of coatings and large numbers of coatings due to the fact that all meltable materials can be processed by thermal spraying and that so many and varied thermal spraying processes exist. The tests described are procedures and test criteria in general use for thermally sprayed coatings.
Any test methods not mentioned are only used in special cases or under laboratory conditions.

Thermisches Spritzen - Merkmale und Prüfung von thermisch gespritzten Schichten (ISO 14923:2003)

Die vorliegende Norm gibt einen Überblick über die Eigenschaften von Beschichtungen, die durch thermisches Spritzen hergestellt werden. Aufgrund der Tatsache, daß alle schmelzbaren Werkstoffe durch thermisches Spritzen verarbeitet werden können, sowie aufgrund der vielen und unterschiedlichen Verfahren zum thermischen Spritzen ist es unmöglich, in vorliegender Norm im Detail auf die verschiedenen Schichttypen und zahlreichen Schichten einzugehen. Die angegebenen Normen geben zusätzliche Informationen.

Projection thermique - Caractérisation et essais des revêtements obtenus par projection thermique (ISO 14923:2003)

L'ISO 14923:2003 donne une vue d'ensemble des caractéristiques des revêtements obtenus par projection thermique.
Étant donné que tous les matériaux susceptibles d'être fondus peuvent être traités par projection thermique et qu'il existe une grande variété de procédés de projection thermique, l'ISO 14923:2003 ne permet pas de détailler les divers et nombreux types de revêtements. Les essais cités correspondent aux modes opératoires et aux critères d'essai qui sont généralement utilisés dans le cas des revêtements obtenus par projection thermique.
Les méthodes d'essai non mentionnées ne sont utilisées que dans des cas particuliers ou dans des conditions de laboratoire.

Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003)

General Information

Status
Published
Publication Date
30-Jun-2003
Withdrawal Date
30-Jan-2004
Current Stage
9093 - Decision to confirm - Review Enquiry
Start Date
10-Sep-2008
Completion Date
10-Sep-2008

Buy Standard

Standard
EN ISO 14923:2004
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14923:2004
01-junij-2004
Thermal spraying - Characterization and testing of thermally sprayed coatings
(ISO 14923:2003)
Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO
14923:2003)
Thermisches Spritzen - Merkmale und Prüfung von thermisch gespritzten Schichten (ISO
14923:2003)
Projection thermique - Caractérisation et essais des revetements obtenus par projection
thermique (ISO 14923:2003)
Ta slovenski standard je istoveten z: EN ISO 14923:2003
ICS:
25.220.20 Površinska obdelava Surface treatment
SIST EN ISO 14923:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 14923:2004

---------------------- Page: 2 ----------------------

SIST EN ISO 14923:2004
EUROPEAN STANDARD
EN ISO 14923
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2003
ICS 25.220.20
English version
Thermal spraying - Characterization and testing of thermally
sprayed coatings (ISO 14923:2003)
Projection thermique - Caractérisation et essais des Thermisches Spritzen - Merkmale und Prüfung von
revêtements obtenus par projection thermique (ISO thermisch gespritzten Schichten (ISO 14923:2003)
14923:2003)
This European Standard was approved by CEN on 11 March 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14923:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 14923:2004
EN ISO 14923:2003 (E)
Contents
page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions.6
4 Manufacturing the coating.7
4.1 General.7
4.2 Coating materials.7
4.3 Coating properties.8
4.4 Technological and physical properties.8
5 Tests.10
5.1 General.10
5.2 Non-destructive test methods .10
5.3 Destructive test methods.12
2

---------------------- Page: 4 ----------------------

SIST EN ISO 14923:2004
EN ISO 14923:2003 (E)
Foreword
This document (EN ISO 14923:2003) has been prepared by Technical Committee CEN/TC 240 "Thermal spraying
and the
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.