prEN 1063

Glass in building - Security glazing - Testing and classification of resistance against bullet attack

This document specifies performance requirements and test methods for the classification of the bullet-resistance of glass (consisting of one or more layers of glass) and glass/plastic composites.
NOTE 1   The term "bullet-resistant glazing" applies to products that have the obvious characteristics of glass, but it is understood to include also laminated products of glass and plastics and in some saces, insulating glass units.
This document applies to:
-   attack by handguns, rifles and shotguns;
-   glazing in buildings, for interior and exterior use;
-   the glazing product itself, assuming proper fixing;
NOTE 2   The protection provided by bullet-resistant glazing depends not only on the product itself, but also upon the design and fixing of the glass.

Glas im Bauwesen - Sicherheitssonderverglasung - Prüfverfahren und Klasseneinteilung für den Widerstand gegen Beschuß

Dieses Dokument legt Leistungsanforderungen und Prüfverfahren für die Klassifizierung von durchschuss-hemmenden Verglasungen (ein  oder mehrschichtig) und Glas /Kunststoffverbunden für das Bauwesen fest.
ANMERKUNG 1   Der Begriff „durchschusshemmende Verglasung“ bezieht sich auf Erzeugnisse, die die eindeutigen Eigenschaften von Glas haben, aber er beinhaltet auch Erzeugnisse, die ein Verbund aus Glas und Kunststoff sind, sowie in einigen Fällen Mehrscheiben-Isolierglas.
Dieses Dokument bezieht sich auf:
-   Angriff mit Faustfeuerwaffen, Büchsen und Schrotflinten;
-   Verglasungen im Innenbereich und Außenbereich von Gebäuden;
-   das Verglasungserzeugnis selbst unter der Voraussetzung korrekter Montage.
ANMERKUNG 2   Der Schutz durch durchschusshemmende Verglasungen hängt nicht nur vom Erzeugnis selbst, sondern auch vom Aufbau und Einbau des Glases ab.

Verre dans la construction - Vitrage de sécurité - Essai et classification de la résistance à l’attaque par balle

Le présent document spécifie des exigences de performance et des méthodes d’essai permettant la classification de la résistance aux balles des vitrages en verre (constitués d’une ou plusieurs couches de verre) et des vitrages composites verre/plastique.
NOTE 1   Le terme « vitrage résistant aux balles » s’applique aux produits possédant les caractéristiques évidentes du verre, mais inclut également des produits feuilletés en verre et en matière plastique ainsi que, dans certains cas, les vitrages isolants.
Le présent document s’applique :
-   aux attaques au pistolet, fusil/carabine et fusil de chasse ;
-   aux vitrages mis en oeuvre à l’intérieur ou à l’extérieur des bâtiments ;
-   au produit « vitrage » lui-même, supposé correctement installé.
NOTE 2   La protection apportée par un vitrage résistant aux balles ne dépend pas uniquement du produit lui-même, mais également de la conception et du mode de fixation du vitrage.

Steklo v gradbeništvu - Varnostna zasteklitev - Preskušanje in klasifikacija odpornosti proti strelom

General Information

• Status: Not Published
• Publication Date: 18-Oct-2021
• Withdrawal Date: 18-Apr-2022
• ICS: 13.310 - Protection against crime
• ICS: 81.040.20 - Glass in building
• Technical Committee: CEN/TC 129 - Glass in building
• Drafting Committee: CEN/TC 129/WG 14 - Security - Anti-bullet and anti-explosion
• Current Stage: 4098 - Decision to abandon - Enquiry
• Completion Date: 25-May-2022
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/135 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on flat glass, profiled glass and glass block products
• Ref Project: oSIST prEN 1063:2019 - Glass in building - Security glazing - Testing and classification of resistance against bullet attack

Relations

• Revises: EN 1063:1999 - Glass in building - Security glazing - Testing and classification of resistance against bullet attack
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 1063:2019
01-november-2019
Steklo v gradbeništvu - Varnostna zasteklitev - Preskušanje in klasifikacija
odpornosti proti strelom
Glass in building - Security glazing - Testing and classification of resistance against bullet
attack
Glas im Bauwesen - Sicherheitssonderverglasung - Prüfverfahren und Klasseneinteilung
für den Widerstand gegen Beschuß
Verre dans la construction - Vitrage de sécurité - Essai et classification de la résistance à
l’attaque par balle
Ta slovenski standard je istoveten z: prEN 1063
ICS:
13.310 Varstvo pred kriminalom Protection against crime
81.040.20 Steklo v gradbeništvu Glass in building
oSIST prEN 1063:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 1063:2019

---------------------- Page: 2 ----------------------
oSIST prEN 1063:2019


DRAFT
EUROPEAN STANDARD
prEN 1063
NORME EUROPÉENNE

EUROPÄISCHE NORM

September 2019
ICS 13.310; 81.040.20 Will supersede EN 1063:1999
English Version

Glass in building - Security glazing - Testing and
classification of resistance against bullet attack
Verre dans la construction - Vitrage de sécurité - Essai Glas im Bauwesen - Sicherheitssonderverglasung -
et classification de la résistance à l'attaque par balle Prüfverfahren und Klasseneinteilung für den
Widerstand gegen Beschuß
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 129.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1063:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 1063:2019
prEN 1063:2019 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Classification of the levels of bullet-resistance and test conditions . 6
4.1 Classification and requirements for the testing. 6
4.2 Extension rules. 8
5 Test pieces for testing . 9
6 Perforation . 9
7 Performance requ
...