EN 13408:2002

Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of bond strength

This European Standard specifies a test method for the determination of bond strength between a cured hydraulic setting smoothing and/or levelling com-pound which is referred to as "smoothing and/or levelling compound", and a standard substrate.

Prüfverfahren für hydraulisch erhärtende Boden-Spachtelmassen - Bestimmung der Haftzugfestigkeit

Die vorliegende Europäische Norm legt ein Prüfverfahren für die Bestimmung der Zugfestigkeit des Haftverbundes zwischen einer hydraulisch ausgehärteten Boden-Spachtelmasse, die im folgenden als 'Boden-Spachtelmassé bezeichnet wird, und einem Standard-Untergrund fest.

Méthodes d'essai pour les mortiers de lissage et/ou d'égalisation à prise hydraulique - Détermination de la force de liaison

La présente Norme européenne spécifie une méthode d'essai permettant de déterminer la force de liaison entre un mortier de lissage et/ou d'égalisation à prise hydraulique ayant durci, ci-après dénommé "mortier de lissage et/ou d'égalisation", sur un substrat normalisé.

Preskusne metode za talne izravnalne in/ali livelirne mase za hidravlično nanašanje - Določanje trdnosti vezave

General Information

• Status: Published
• Publication Date: 19-Mar-2002
• Withdrawal Date: 29-Sep-2002
• ICS: 91.100.99 - Other construction materials
• Technical Committee: CEN/TC 193 - Adhesives
• Drafting Committee: CEN/TC 193/WG 4 - Building adhesives
• Ref Project: SIST EN 13408:2002 - Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of bond strength

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.UDYOLþQRPrüfverfahren für hydraulisch erhärtende Boden-Spachtelmassen - Bestimmung der HaftzugfestigkeitMéthodes d'essai pour les mortiers de lissage et/ou d'égalisation a prise hydraulique - Détermination de la force de liaisonMethods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of bond strength91.100.99Drugi gradbeni materialiOther construction materialsICS:Ta slovenski standard je istoveten z:EN 13408:2002SIST EN 13408:2002en01-september-2002SIST EN 13408:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13408March 2002ICS 91.100.99English versionMethods of test for hydraulic setting floor smoothing and/orlevelling compounds - Determination of bond strengthMéthodes d'essai pour les mortiers de lissage et/oud'égalisation à prise hydraulique - Détermination de la forcede liaisonPrüfverfahren für hydraulisch erhärtende Boden-Spachtelmassen - Bestimmung der HaftzugfestigkeitThis European Standard was approved by CEN on 30 December 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13408:2002 ESIST EN 13408:2002
...