Thermal insulating products for building applications - Determination of bending behaviour

This European Standard specifies the equipment and procedures for determining the bending behaviour of full size products (Method A) and test specimens (Method B) under the action of three-point loading. It is applicable to thermal insulating products.
The test is designed to determine the bending strength of products and their deflection at a given load.
The method can be used to determine the resistance of the product to bending stresses during transport and application.

Wärmedämmstoffe für das Bauwesen - Bestimmung des Verhaltens bei Biegebeanspruchung

Diese Europäische Norm legt Prüfeinrichtungen und Verfahren zur Bestimmung des Verhaltens bei Biegebeanspruchung von Produkten in Liefermaßen (Prüfverfahren A) und von Probekörpern (Prüfverfahren B) unter einer 3-Punkt-Beanspruchung fest. Sie gilt für Wärmedämmstoffe.
Das Prüfverfahren dient zur Bestimmung der Biegefestigkeit von Produkten und deren Durchbiegung bei einer gegebenen Belastung.
Das Prüfverfahren kann angewendet werden, um die Widerstandsfähigkeit eines Produkts gegen Biegespannungen bei Transport und Anwendung zu bestimmen.

Produits isolants thermiques destinés aux applications du bâtiment - Détermination du comportement en flexion

La présente Norme européenne spécifie l'équipement et les modes opératoires permettant de déterminer le comportement en flexion des produits en vraies dimensions (méthode A) et des éprouvettes (méthode B) sous l'action d'une charge répartie en trois points. Elle s'applique aux produits isolants thermiques.
L'essai est conçu pour déterminer la résistance à la flexion des produits ainsi que la flèche correspondante à une charge donnée.
La méthode peut être utilisée pour déterminer la résistance du produit aux contraintes de flexion pendant le transport et la mise en œuvre.

Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje obnašanja pri upogibu

Ta evropski standard določa opremo in postopke za ugotavljanje obnašanja pri upogibu proizvodov naravne velikosti (metoda A) in preskušancev (metoda B) pri tritočkovni obremenitvi. Uporablja se za toplotnoizolacijske proizvode. Preskus je namenjen ugotavljanju upogibne trdnosti proizvodov in upogibnosti ob določeni obremenitvi. Ta metoda se lahko uporablja za ugotavljanje, ali je proizvod dovolj močan, da vzdrži napetosti med prevozom in uporabo.

General Information

Status
Published
Publication Date
12-Mar-2013
Withdrawal Date
29-Sep-2013
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
03-Mar-2024
Completion Date
03-Mar-2024

Relations

Buy Standard

Standard
EN 12089:2013 (EN)
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
EN 12089:2013 (DE)
German language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
k FprEN 12089:2012
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje obnašanja pri upogibuWärmedämmstoffe für das Bauwesen - Bestimmung des Verhaltens bei BiegebeanspruchungProduits isolants thermiques destinés aux applications du bâtiment - Détermination du comportement en flexionThermal insulating products for building applications - Determination of bending behaviour91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:EN 12089:2013SIST EN 12089:2013en,fr,de01-julij-2013SIST EN 12089:2013SLOVENSKI
STANDARDSIST EN 12089:19991DGRPHãþD



SIST EN 12089:2013



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12089
March 2013 ICS 91.100.60 Supersedes EN 12089:1997English Version
Thermal insulating products for building applications - Determination of bending behaviour
Produits isolants thermiques destinés aux applications du bâtiment - Détermination du comportement en flexion
Wärmedämmstoffe für das Bauwesen - Bestimmung des Verhaltens bei Biegebeanspruchung This European Standard was approved by CEN on 15 December 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12089:2013: ESIST EN 12089:2013



EN 12089:2013 (E) 2 Contents Page Foreword . 3 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 5 4 Principle. 6 5 Apparatus . 6 6 Test specimens . 7 7 Procedure . 8 8 Calculation and expression of results . 9 9 Accuracy of measurement . 10 10 Test report . 10
SIST EN 12089:2013



EN 12089:2013 (E) 3 Foreword This document (EN 12089:2013) has been prepared by Technical Committee CEN/TC 88 “Thermal insulation materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2013, and conflicting national standards shall be withdrawn at the latest by September 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12089:1997.
The revision of this standard con
...

SLOVENSKI STANDARD
SIST EN 12089:2013
01-julij-2013
Nadomešča:
SIST EN 12089:1999
Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje obnašanja
pri upogibu
Thermal insulating products for building applications - Determination of bending
behaviour
Wärmedämmstoffe für das Bauwesen - Bestimmung des Verhaltens bei
Biegebeanspruchung
Produits isolants thermiques destinés aux applications du bâtiment - Détermination du
comportement en flexion
Ta slovenski standard je istoveten z: EN 12089:2013
ICS:
91.100.60 Materiali za toplotno in Thermal and sound insulating
zvočno izolacijo materials
SIST EN 12089:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 12089:2013

---------------------- Page: 2 ----------------------
SIST EN 12089:2013


EUROPÄISCHE NORM
EN 12089

EUROPEAN STANDARD

NORME EUROPÉENNE
März 2013
ICS 91.100.60 Ersatz für EN 12089:1997
Deutsche Fassung
Wärmedämmstoffe für das Bauwesen - Bestimmung des
Verhaltens bei Biegebeanspruchung
Thermal insulating products for building applications - Produits isolants thermiques destinés aux applications du
Determination of bending behaviour bâtiment - Détermination du comportement en flexion
Diese Europäische Norm wurde vom CEN am 15. Dezember 2012 angenommen.

Die CEN-Mitglieder sind gehalten, die CEN/CENELEC-Geschäftsordnung zu erfüllen, in der die Bedingungen festgelegt sind, unter denen
dieser Europäischen Norm ohne jede Änderung der Status einer nationalen Norm zu geben ist. Auf dem letzten Stand befindliche Listen
dieser nationalen Normen mit ihren bibliographischen Angaben sind beim Management-Zentrum des CEN-CENELEC oder bei jedem CEN-
Mitglied auf Anfrage erhältlich.

Diese Europäische Norm besteht in drei offiziellen Fassungen (Deutsch, Englisch, Französisch). Eine Fassung in einer anderen Sprache,
die von einem CEN-Mitglied in eigener Verantwortung durch Übersetzung in seine Landessprache gemacht und dem Management-
Zentrum mitgeteilt worden ist, hat den gleichen Status wie die offiziellen Fassungen.

CEN-Mitglieder sind die nationalen Normungsinstitute von Belgien, Bulgarien, Dänemark, Deutschland, der ehemaligen jugoslawischen
Republik Mazedonien, Estland, Finnland, Frankreich, Griechenland, Irland, Island, Italien, Kroatien, Lettland, Litauen, Luxemburg, Malta,
den Niederlanden, Norwegen, Österreich, Polen, Portugal, Rumänien, Schweden, der Schweiz, der Slowakei, Slowenien, Spanien, der
Tschechischen Republik, der Türkei, Ungarn, dem Vereinigten Königreich und Zypern.





EUROPÄISCHES KOMITEE FÜR NORMUNG
EUROPEAN COMMITTEE FOR STANDARDIZATION

COMITÉ EUROPÉEN DE NORMALISATION

Management-Zentrum: Avenue Marnix 17, B-1000 Brüssel
© 2013 CEN Alle Rechte der Verwertung, gleich in welcher Form und in welchem Ref. Nr. EN 12089:2013 D
Verfahren, sind weltweit den nationalen Mitgliedern von CEN vorbehalten.

---------------------- Page: 3 ----------------------
SIST EN 12089:2013
EN 12089:2013 (D)
Inhalt Seite
Vorwort .3
1 Anwendungsbereich .5
2 Normative Verweisungen .5
3 Begriffe .5
4 Kurzbeschreibung .6
5 Prüfeinrichtungen .6
6 Probekörper .7
7 Prüfverfahren .8
8 Ermittlung und Angabe der Ergebnisse .9
9 Genauigkeit der Messungen . 10
10 Prüfbericht . 10

2

---------------------- Page: 4 ----------------------
SIST EN 12089:2013
EN 12089:2013 (D)
Vorwort
Dieses Dokument (EN 12089:2013) wurde vom Technischen Komitee CEN/TC 88 „Wä
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje obnašanja pri upogibuWärmedämmstoffe für das Bauwesen - Bestimmung des Verhaltens bei BiegebeanspruchungProduits isolants thermiques destinés aux applications du bâtiment - Détermination du comportement en flexionThermal insulating products for building applications - Determination of bending behaviour91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:FprEN 12089kSIST FprEN 12089:2012en,fr,de01-september-2012kSIST FprEN 12089:2012SLOVENSKI
STANDARD



kSIST FprEN 12089:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 12089
June 2012 ICS 91.100.60 Will supersede EN 12089:1997English Version
Thermal insulating products for building applications - Determination of bending behaviour
Produits isolants thermiques destinés aux applications du bâtiment - Détermination du comportement en flexion
Wärmedämmstoffe für das Bauwesen - Bestimmung des Verhaltens bei Biegebeanspruchung This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 88.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 12089:2012: EkSIST FprEN 12089:2012



FprEN 12089:2012 (E) 2 Contents Page Foreword .31Scope .52Normative references .53Terms and definitions .54Principle .65Apparatus .66Test specimens .77Procedure .88Calculation and expression of results .99Accuracy of measurement . 1010Test report . 10 kSIST FprEN 12089:2012



FprEN 12089:2012 (E) 3 Foreword This document (FprEN 12089:2012) has been prepared by Technical Committee CEN/TC 88 “Thermal insulation materials and products”, the secretariat of which is held by DIN. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 12089:1997.
The revision of this standard contains no major changes only minor
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.